MSA  Vol.5 No.6 , May 2014
Investigation of the Surface Morphology and Structural Characterization of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene (PF-ABS) Composites
ABSTRACT

With the aid of Injection Moulding Machine (IMM) Palm fiber reinforced Acrylonitrile Butadiene Styrene (ABS) composites (PF-ABS) were prepared. Three sets of samples were prepared for three different wt% (5%, 10% and 20%) of fiber contents. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) experiments were performed to study the surface morphology, microstructure (if it crystalline or noncrystalline) and new bond formation after preparation of the composites. SEM pattern shows that after addition of palm fiber in PF-ABS composites the brittleness increased due to creation of voids in the composites except 10% fiber content in PF-ABS. From XRD pattern it is clear that the palm fiber, ABS and PF-ABS composites are amorphous in nature. Moreover FTIR spectrum shows that there is no new bond formed after addition of palm fiber in ABS polymeric matrix to create PF-ABS composites.


Cite this paper
Neher, B. , Gafur, M. , Al-Mansur, M. , Bhuiyan, M. , Qadir, M. and Ahmed, F. (2014) Investigation of the Surface Morphology and Structural Characterization of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene (PF-ABS) Composites. Materials Sciences and Applications, 5, 378-386. doi: 10.4236/msa.2014.56043.
References
[1]   Dhakal, H.N., Zhang, Z.Y. and Richardson, M.O.W. (2007) Effect of Water Absorption on the Mechanical Properties of Hemp Fibre Reinforced Unsaturated Polyester Composites. Composites Science and Technology, 67, 1674-1683.
http://dx.doi.org/10.1016/j.compscitech.2006.06.019

[2]   Bolton, J. (1995) The Potential of Plant Fibres as Crops for Industrial Use. Outlook Agric, 24, 85-89.

[3]   Gassan, J. and Cutowski, V.S. (2000) Effect of Corona Discharge and UV Treatment on the Properties of Jute-Fiber Epoxy Composites. Composites Science and Technology, 60, 2857-2863.
http://dx.doi.org/10.1016/S0266-3538(00)00168-8

[4]   Herrera-Franco, P.J. and Valadez-Gonzalez, A. (2005) A Study of the Mechanical Properties of Short Natural-Fiber Reinforced Composites. Composites: Part B, 36, 597-608.
http://dx.doi.org/10.1016/S0266-3538(00)00168-8

[5]   Maniruzzaman, M., Rahman, M.H. and Akther Zaman, M.A. (2005) Composition of Agave Atroverance Fiber. Jahangirnagar University Journal of Science, 28, 23-30.

[6]   Salari, D. and Ranjbar, H. (2008) Study on the Recycling of ABS Resins: Simulation of Reprocessing and Thermo-oxidation. Iranian Polymer Journal, 17, 599-610.

[7]   Acrylonitrile Butadiene Styrene (ABS) (2010)
http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene

[8]   Reena, G., Sangita and Verinder, K. (2011) FT-IR Studies of E-Plastic Obtained from Obsolete Computers. Journal of Chemical and Pharmaceutical Research, 3, 660-667.

[9]   Krache, R. and Debbah, I. (2011) Some Mechanical and Thermal Properties of PC/ABS Blends. Materials Sciences and Applications, 2, 404-410.
http://dx.doi.org/10.4236/msa.2011.25052

[10]   Mohammad, N.N.B. and Arsad, A. (2013) Mechanical, Thermal and Morphological Study of Kenaf Fiber Reinforced rPET/ABS Composites. Malaysian Polymer Journal, 8, 8-13.

[11]   Lee, S.H. and Wang, S. (2006) Biodegradable Polymers/Bamboo Fiber Biocomposites with Bio-Based Coupling Agent. Composites: Part A, 37, 80-91.
http://dx.doi.org/10.1016/j.compositesa.2005.04.015

[12]   Bhuiyan, A.H., Mina, M.F., Seema, S., Khan, M.M., Rahman, M.J. and Gafur, M.A. (2011) Structural, Elastic and Thermal Properties of Titanium Dioxide Filled Isostatic Polypropylene. Journal of Polymer Research, 18, 1073-1079.
http://dx.doi.org/10.1007/s10965-010-9509-y

[13]   Neher, B., Bhuiyan, M.M.R., Kabir, H., Qadir, M.R., Gafur, M.A. and Ahmed, F. (2014) Study of Mechanical and Physical Properties of Palm Fiber Reinforced Acrylonitrile Butadiene Composite. Materials Sciences and Applications, 5, 39-45.

[14]   Khan M.A., Islam, T., Arifur Rahman, M., Islam, J.M.M., Khan, R.A., Gafur, M.A., Mollah, M.Z. I. and Alam, A.K.M. (2010) Thermal, Mechanical and Morphological Characterization of Jute/Gelatin Composites. Polymer-Plastics Technology and Engineering, 49, 742-747.
http://dx.doi.org/10.1080/03602551003652698

[15]   Taj, S., Murawar, M.A. and Khan, S. (2007) Natural Fiber-Reinforced Polymer Composites. Proceedings of Pakistan Academy of Sciences, 44, 129-144.

[16]   Tan, C., Ahmad, I. and Heng, M. (2001) Characterization of Polyester Composites from Recycled Polyethylene Terephthalate Reinforced with Empty Fruit Bunch Fibers. Materials and Design, 32, 4493-4501.
http://dx.doi.org/10.1016/j.matdes.2011.03.037

[17]   Moniruzzaman, M., Moniruzzaman, M., Gafur, M.A. and Santulli, C. (2009) Lady’s Finger Fibres for Possible Use as a Reinforcement in Composite Materials. Journal of Biobased Materials and Bioenergy, 3, 1-5.

[18]   Budnikov, P.P. (1964) The Technology of Ceramic and Refractories. M. I. T. Press, Cambridge.

 
 
Top