In this paper a model of a high pressure hydraulic system was developed to simulate the effect of increased internal leakages inside the hydraulic cylinder and the 4/2 way directional control valve and to calculate the main parameters of the hydraulic system under various loads through the use of leakage-simulating throttle valves. After the completion of modeling, the throttle valves that simulate the internal leakages were calibrated and a number of test runs were performed for the cases of normal operation and the operation with increased internal leakages. The theoretical predictions were compared against the experimental results from an actual hydraulic test platform installed in the laboratory. In all cases, modeling and experimental data curves correlate very well in form, magnitude and response times for all the system’s main parameters. This proves that the present modeling can be used to accurately predict various faults in hydraulic systems, and can thus be used for proactive fault finding in many cases, especially when the defective component is not easily detected and obvious at first sight.
Cite this paper
Athanasatos, P. , Koulocheris, D. , Costopoulos, T. and Spitas, V. (2014) Experimental Verification of Fault Predictions in High Pressure Hydraulic Systems. Modern Mechanical Engineering
, 67-83. doi: 10.4236/mme.2014.42008
 Kaliafetis, P. and Costopoulos, Th. (1994) Modelling and Simulation of an Axial Piston Variable Displacement Pump with Pressure Control. Mechanism and Machine Theory, 30, 599-612. http://dx.doi.org/10.1016/0094-114X(94)00057-R
 Hehn, A.H. (1994) Fluid Power Troubleshooting: Second Edition, Revised and Expanded. CRC Press, Boca Raton.
 Meritt, H.E. (1967) Hydraulic Control Systems. John Wiley and Sons, Inc., Hoboken.
 Mitchell, R.J. and Pippenger, J.J. (1997) Fluid Power Maintenance Basics and Troubleshooting. Marcel Dekker Inc., New York.
 Rabie, G.M. (2009) Fluid Power Engineering. McGraw-Hill, New York.
 Totten, G.E., Wills, D.K. and Feldmann, D.K. (2001) Hydraulic Failure Analysis: Fluids, Components and System Effects. ASTM. http://dx.doi.org/10.1520/STP1339-EB
 Athanasatos, P. and Costopoulos, T. (2011) Proactive Fault Finding in a 4/3-Way Direction Control Valve of a High Pressure Hydraulic System Using the Bond Graph Method with Digital Simulation. Mechanism and Machine Theory, 50, 64-89. http://dx.doi.org/10.1016/j.mechmachtheory.2011.11.018
 Athanasatos, P., Koulocheris, D., Costopoulos, T. and Raptis, K. (2013) Operational Fault Diagnosis in Industrial Hydraulic Systems through Modeling the Internal Leakage of Its Components. American Journal of Applied Sciences, 10, 1648-1659. http://dx.doi.org/10.3844/ajassp.2013.1648.1659
 Barnard, B.W. and Dransfield, P. (1977) Predicting Response of a Proposed Hydraulic Control System Using Bond Graphs. Journal of Dynamic Systems, Measurement, and Control, 99, 1-8. http://dx.doi.org/10.1115/1.3427068
 Barnard, B.W. (1973) Predicting the Dynamic Response of a Hydraulic System Using Power Bond Graphs. M.Sc Thesis in Mechanical Engineering, Monash University, Melbourne (Unpublished).
 Dransfield, P. (1981) Hydraulic Control Systems—Design and Analysis of Their Dynamics. Lecture Notes in Control and Information Sciences. Springer-Verlag, Berlin. http://dx.doi.org/10.1007/BFb0005627
 Dransfield, P. and Steki, J.S. (1991) Bond Graph Influenced Research and Learning in Fluid Power. Journal of the Franklin Institute, 328, 535-545. http://dx.doi.org/10.1016/0016-0032(91)90042-2