WJNSE  Vol.4 No.2 , June 2014
Surface Effect of Silica Nano-Particles with Different Size on Thermotropic Liquid Crystalline Polyester Composites
Abstract: Interface properties of nano-silica/thermotropic liquid crystalline polyesters (TLCP) composites were investigated by X-ray diffraction analysis and differential scanning calorimetory. The crystallinity of TLCP in the composites drastically decreased with an increase of nano-silica content, depending on the surface area of the silica particles. Little size effects (40 - 400 nm) in the particles and strong interaction between silica surface and the C=O moieties of TLCP were observed by IR analysis. The glass transition temperature of TLCP (<20 nm) in silica surface increased about 20。C higher than that in bulk.
Cite this paper: Fukatsu, H. , Kuno, M. , Matsuda, Y. and Tasaka, S. (2014) Surface Effect of Silica Nano-Particles with Different Size on Thermotropic Liquid Crystalline Polyester Composites. World Journal of Nano Science and Engineering, 4, 35-41. doi: 10.4236/wjnse.2014.42006.

[1]   Sawyer, L.C., Linstid, H.C. and Romer, M. (1998) Emerging Applications for Neat LCPs. Plastics Engineering (N.Y.), 54, 37-41.

[2]   Park, S.K., Kim, S.H. and Hwang, J.T. (2009) Effect of Fumed Silica Nanoparticles on Glass Fiber Filled Thermotropic Liquid Crystalline Polymer Composites. Polymer Composites, 30, 309-317.

[3]   Voss, H. and Friedrich, K. (1986) Influence of Short-Fibre Reinforcement on the Fracture Behaviour of a Bulk Liquid Crystal Polymer. Journal of Materials Science, 21, 2889-2900.

[4]   Chivers, R.A. and Moore, D.R. (1991) Influence of Fibre Reinforcement on the Mechanical Anisotropy of Liquid Crystal Polymers. Polymer, 32, 2190-2198.

[5]   Plummer, C.J.G., Zülle, B., Demarmels, A. and Kausch, H.-H. (1993) The Structure of Filled and Unfilled Thermotropic Liquid Crystalline Polymer Injection Moldings. Journal of Applied Polymer Science, 48, 751-766.

[6]   Scaffaro, R., Pedretti, U. and La Mantia, F.P. (1996) Effects of Filler Type and Mixing Method on the Physical Properties of a Reinforced Semirigid Liquid Crystal Polymer. European Polymer Journal, 32, 869-875.

[7]   Bhama, S. and Stupp, S.I. (1990) Liquid Crystal Polymer-Carbon Fiber Composites. Molecular Orientation. Polymer Engineering & Science, 30, 228-234.

[8]   Lee, W.-G., Hsu, T.-C.J. and Su, A.C. (1994) Interphase Morphology of Liquid Crystalline Polymer/Glass Fiber Composites: Effect of Fiber Surface Treatment. Macromolecules, 27, 6551-6558.

[9]   Zhang, X., Tasaka, S. and Inagakim N. (2000) Surface Mechanical Properties of Low-Molecular-Weight Polystyrene below Its Glass-Transition Temperatures. Journal of Polymer Science Part B: Polymer Physics, 28, 654-658.;2-Z

[10]   Zhang, X., Tasaka, S. and Inagaki, N. (2000) Studies on Surface Molecular Motion of Oligomeric Polystyrene by Differential Scanning Calorimetry. Polymers for Advanced Technologies, 11, 40-47.;2-%23

[11]   Zhang, X., Tasaka, S. and Inagaki, N. (2003) Adhesion Behavior of Blends of Polybutadiene and Tackifiers. Journal of Adhesion Science and Technology, 17, 423-434.

[12]   Romo-Uribe, A. and Windle, A.H. (1996) “Log-Rolling” Alignment in Main-Chain Thermotropic Liquid Crystalline Polymer Melts under Shear: An In-Situ WAXS Study. Macromolecules, 29, 6246-6255.

[13]   Kromer, H., Khun, R., Pielartzik, H., Siebke, W., Eckhardt, V. and Schmidt, M. (1991) Persistence Length and Molecular Mass Distribution of a Thermotropic Main-Chain Liquid-Crystal Polymer. Macromolecules, 24, 1950-1954.

[14]   Chivers, R.A., Blackwell, J. and Gutierrez, G.A. (1984) The Structure of Copoly(4-hydroxybenzoic acid/2-hydroxy- 6-naphthoic Acid): 2. An Atomic Model for the Copolyester Chain. Polymer, 25, 435-440.

[15]   Blackwell, J., Gutierrez, G.A. and Chivers, R.A. (1984) Diffraction by Aperiodic Polymer Chains: The Structure of Liquid Crystalline Copolyesters. Macromolecules, 17, 1219-1224.

[16]   Blackwell, J., Biswas, A. and Bonart, R.C. (1985) X-Ray Studies of the Structure of Liquid-Crystalline Copolyesters: Treatment of an Atomic Model as a One-Dimensional Paracrystal. Macromolecules, 18, 2126-2130.

[17]   Chivers, R.A. and Blackwell, J. (1985) Three-Dimensional Structure of Copolymers of p-Hydroxybenzoic Acid and 2-Hydroxy-6-Naphthoic Acid: A Model for Diffraction from a Nematic Structure. Polymer, 26, 997-1002.

[18]   Biswas, A. and Blackwell, J. (1987) X-Ray Diffraction from Liquid-Crystalline Copolyesters: Matrix Methods for In- tensity Calculations Using a One-Dimensional Paracrystalline Model. Macromolecules, 20, 2997-3002.

[19]   Mitchell, G.R. and Windle, A.H. (1985) Diffraction from Thermotropic Copolyester Molecules. Colloid and Polymer Science, 263, 230-244.

[20]   Gutierrez, G.A., Chivers, R.A., Blackwell, J., Stamatoff, J.B. and Yoon, H. (1983) The Structure of Liquid Crystalline Aromatic Copolyesters Prepared from 4-Hydroxybenzoic Acid and 2-Hydroxy-6-Naphthoic Acid. Polymer, 24, 937- 942.

[21]   Mitchell, G.R. and Windle, A.H. (1983) Measurement of Molecular Orientation in Thermotropic Liquid Crystalline Polymers. Polymer, 24, 1513-1520.

[22]   Achiha, O., Kyogoku, Y., Matsuda, Y. and Tasaka, S. (2012) Interfacial Structure of Composites of Poly(m-xylylen adipamide) and Silica Nano-Particles. Japanese Journal of Applied Physics, 51, 100204-1-3.

[23]   Soga, I. and Granick, S. (2000) Segmental Orientations of Trains versus Loops and Tails: The Adsorbed Polymethyl- methacrylate System When the Surface Coverage Is Incomplete. Colloids and Surface A, 170, 113-117.