Christopher P. Pannier, Radek Skoda

Show more
Department of Nuclear Engineering, Texas A&M University, College Station, USA.
Department of Nuclear Engineering, Texas A&M University, College Station, USA;Czech Technical University, Prague, Czech Republic.
Show less

Abstract: Small modular reactors (SMRs) offer simple, standardized, and safe modular designs for new nuclear reactor construction. They are factory built, requiring smaller initial capital investment and facilitating shorter construction times. SMRs also promise competitive economy when compared with the current reactor fleet. Construction cost of a majority of the projects, which are mostly in their design stages, is not publicly available, but variable costs can be determined from fuel enrichment, average burn-up, and plant thermal efficiency, which are public parameters for many near-term SMR projects. The fuel cost of electricity generation for selected SMRs and large reactors is simulated, including calculation of optimal tails assay in the uranium enrichment process. The results are compared between one another and with current generation large reactor designs providing a rough comparison of the long-term economics of a new nuclear reactor project. SMRs are predicted to have higher fuel costs than large reactors. Particularly, integral pressurized water reactors (iPWRs) are shown to have from 15% to 70% higher fuel costs than large light water reactors using 2014 nuclear fuels market data. Fuel cost sensitivities to reactor design parameters are presented.

Keywords: Nuclear Energy, New Nuclear, Nuclear Fuel Cost, Small Modular Reactors, SMR, Light Water Reactors

Cite this paper: Pannier, C. and Skoda, R. (2014) Comparison of Small Modular Reactor and Large Nuclear Reactor Fuel Cost. Energy and Power Engineering, 6, 82-94. doi: 10.4236/epe.2014.65009.

References

[1]   World Nuclear Association (2013) Plans for New Reactors Worldwide.
http://world-nuclear.org/info/Current-and-Future-Generation/Plans-For-New-Reactors-Worldwide/

[2]   World Nuclear Association (2013) Small Nuclear Power Reactors.
http://www.world-nuclear.org/info/Nuclear-Fuel-Cycle/Power-Reactors/Small-Nuclear-Power-Reactors/

[3]   Ingersoll, D. (2009) Deliberately Small Reactors and the Second Nuclear Era. Presentation at UC Berkeley.

[4]   Greenspan, E. and Brown, N. (2001) Small Innovative Reactor Designs—Useful Attributes and Status of Technology. Rise University, Houston.

[5]   Michal, R. (2004) Interview with Argonne’s David Wade: On the Development of Small Modular Reactors.
https://smr.inl.gov/Document.ashx?path=DOCS%2fReading+Room%2fArgonneDavidWade2004-8-2.pdf

[6]   Vujic, J., Bergman, R., Skoda, R. and Miletic, M. (2011) Small Modular Reactors: Simpler, Safer, Cheaper? Proceedings of ECOS 2011, Novi Sad, 4-7 July 2011, 2842-2852.

[7]   Locatelli, G. (2010) SMR Economics Evaluation. Proceedings of the 4th Annual Asia-Pacific Nuclear Energy Forum on Small and Medium Reactors (SMRs): Benefits and Challenges, Berkeley, 17-19 June 2010.

[8]   Pannier, C. and Skoda, R. (2011) Assessment of Small Modular Reactor Fuel Cost. Proceedings of ASME 2011 Small Modular Reactors Symposium, Washington DC, 28-30 September 2011.

[9]   Landrey, B. (2010) Introduction to NuScale Power. Proceedings of the 4th Annual Asia-Pacific Nuclear Energy Forum on Small and Medium Reactors (SMRs): Benefits and Challenges, Berkeley, 17-19 June 2010.

[10]   Babcock & Wilcox (2010) B&W mPower Reactor Design Overview.
http://pbadupws.nrc.gov/docs/ML1015/ML101550512.pdf

[11]   Lee, W. (2010) The SMART Reactor. Proceedings of the 4th Annual Asia-Pacific Nuclear Energy Forum on Small and Medium Reactors (SMRs): Benefits and Challenges, Berkeley, 17-19 June 2010.

[12]   Fetterman, R., Harkness, A., Smith, M. and Taylor, C. (2011) An Overview of the Westinghouse Small Modular Reactor. Proceedings of ASME 2011 Small Modular Reactors Symposium. ASME, Washington DC, 28-30 September 2011.

[13]   Singh, K., Rampall, I. and Rajkumar, J. (2011) On the Thermal-Hydraulic Essentials of the Holtec Inherently Safe Modular Underground Reactor (HI-SMUR) System. Proceedings of ASME 2011 Small Modular Reactors Symposium. ASME, Washington DC, 28-30 September 2011.

[14]   Elemash (2004) VVER-1000 Nuclear Fuel.
http://www.elemash.ru/en/production/Products/NFCP/VVER1000/

[15]   Westinghouse (2003) Westinghouse AP 1000 Advanced Nuclear Plant: Plant Description.
http://www.ne.doe.gov/pdfFiles/AP1000_Plant _Description.pdf

[16]   Tepco (2010) Sustainability Report 2010.
http://www.tepco.co.jp/en/challenge/environ/pdf-1/10report-e.pdf

[17]   Areva (2007) UK EPR, Fundamental Safety Overview, Vol. 1: Head Document, Chapter A: EPR Design Description.
http://www.if.uidaho.edu/gunner/ME443-543/HW/UK-EPR.pdf

[18]   Suzuki, S., Ogata, Y., Nishihara, Y. and Fujita, S. (2008) Global Development of Mitsubishi Standard APWR as an Effective Countermeasure Against Global Warming. Mitsubishi Heavy Industries, Ltd., Technical Review, 45, 51-54.
http://www.mhi.co.jp/technology/review/pdf/e453/e453051.pdf

[19]   GE Hitachi Nuclear Energy (2010) ESBWR Design Control Document Tier 2.
http://pbadupws.nrc.gov/docs/ML1034/ML103440210.pdf

[20]   CANDU Energy Inc. (2012) Enhanced CANDU 6 Technical Summary. Mississauga.
http://www.candu.com/site/media/Parent/EC6%20Technical%20Summary_2012-04.pdf

[21]   Cochran, R. and Tsoulfanidis, N. (1999) The Nuclear Fuel Cycle: Analysis and Management. 2nd Edition, American Nuclear Society, La Grange Park.

[22]   The Ux Consulting Company (2011) UxC Prices.
http://uxc.com/review/uxc_Prices.aspx

[23]   Nuclear Energy Agency (1994) The Economics of the Nuclear Fuel Cycle. OECD, Paris.
http://www.oecd-nea.org/ndd/reports/efc/

[24]   Electric Power Research Institute (2010) Parametric Study of Front-End Nuclear Fuel Cycle Costs Using Reprocessed Uranium. EPRI Report 1020659.
http://cybercemetery.unt.edu/archive/brc/20120621082115/
http://brc.gov/sites/default/files/documents/1020659.pdf

[25]   Benedict, M. andPigford, T. (1957) Nuclear Chemical Engineering. McGraw-Hill, New York.

[26]   International Atomic Energy Agency (2007) Current Trends in Nuclear Fuel for Power Reactors. Proceedings of IAEA 2007 General Conference.
http://www.iaea.org/About/Policy/GC/GC51/GC51InfDocuments/English/gc51inf-3-att5_en.pdf