Back
 JACEN  Vol.3 No.2 B , April 2014
Ohmic Heating for Tofu Making—A Pilot Study
Abstract: The aim of this study is to explore the relationship between temperature and electrical conductivity of soya milk under ohmic heating in tofu making. The soya milk of 10 Brix was heated to a steady temperature of 90?C. The applied voltage was increased and the temperature rising rate was investigated for adequate heating profiles in tofu making. Experimental results showed that the electrical conductivity of soya milk is proportional to the heating time. The temperature rising rate was increased from 1.46?C to 3.82?C/min as a result of increased voltage. Hence ohmic heating could be an efficient, convenient heating measure in tofu making.
Cite this paper: Lien, C. , Shen, Y. and Ting, C. (2014) Ohmic Heating for Tofu Making—A Pilot Study. Journal of Agricultural Chemistry and Environment, 3, 7-13. doi: 10.4236/jacen.2014.32B002.
References

[1]   Kohyama, K., Sano, Y. and Doi, E. (1995) Rheological Characteristics and Gelation Mechanism of Tofu (Soybean Crud). Journal of Agricultural and Food Chemistry, 43, 1808-1812. http://dx.doi.org/10.1021/jf00055a011

[2]   Jackson, C.-J., Dini, J.P., Lavandier, C., Rupasinghe, H.P.V., Faulkner, H., Poysa, V.,Buzzell, D. and DeGrandis, S. (2002) Effects of Processing on the Content and Composition of Isoflavones during Manufacturing of Soy Beverage and Tofu. Seminars in Food Analysis, 37, 1117-1123.

[3]   Ting, C.H., Kuo, F.J., Lien, C.C. and Sheng, C.T. (2009) Use of Ultrasound for Characterising the Gelation Process in Heat Induced CaSO4-2H2O Tofu Curd. Journal of Food Engineering, 93, 101-107. http://dx.doi.org/10.1016/j.jfoodeng.2009.01.015

[4]   Saowapark, S., Apichartsrangkoon, A. and Bell, A.E. (2008) Viscoelastic Properties of High Pressure and Heat Induced Tofu Gels. Food Chemistry, 107, 984-989.

[5]   Kuo, F.J., Lien, C.C., Huang, Y.Y. and Ting, C.H. (2011) Use of Ultrasound for Measuring Tofu Texture. Journal of Engineering in Agriculture, Environment and Food, 4, 83-89.

[6]   Vicente, A.A. (2007) Ohmic Heating as an Alternative to Con-ventional Thermal Treatment. Dissertation for PhD Degree in Chemical and Biological Engineering, Universidade do Minho Escola de Engenharia.

[7]   Wagner, J.R., Sobral, P.A. and Palazolo, G.G. (2010) Thermal Behavior of Soy Protein Fractions Depending on Their Preparation Methods, Individual Interactions, and Storage Conditions. Journal of Agriculture and Food Chemistry, 58, 10092-10100. http://dx.doi.org/10.1021/jf101957f

[8]   Prestamo, G., Lesmes, M., Otero, L. and Arroyo, G. (2000) Soybean Vegetable Protein (Tofu) Preserved with High Pressure. Journal of Agricultural and Food Chemistry, 48, 2943-2947. http://dx.doi.org/10.1021/jf991251y

[9]   Ono, T., Tezuka, M., Taira, H., Igarashi, Y. and Yagasaki, K. (2000) Properties of Tofus and Soy Milks Prepared from Soybeans Having Different Subunits of Glycinin. Journal of Agricultural and Food Chemistry, 48, 1111-1117. http://dx.doi.org/10.1021/jf990560l

[10]   Guo, S.T. and Ono, T. (2005) The Role of Composition and Content of Protein Particles in Soymilk on Tofu Curding by Glucono-δ-Lactone or Calcium Sulfate. Journal of Food Science, 70, 258-262. http://dx.doi.org/10.1111/j.1365-2621.2005.tb07170.x

[11]   Li, X., Toyoda, K. and Ihara, I. (2011) Coagulation Process of Soymilk Characterized by Electrical Impedance Spectroscopy. Journal of Food Engineering, 105, 563-568. http://dx.doi.org/10.1016/j.jfoodeng.2011.03.023

[12]   Amatore, C., Berthou, M. and Hébert, S. (1998) Fundamental Principles of Electrochemical Ohmic Heating of Solutions. Journal of Electroanalytical Chemistry, 457, 191-203. http://dx.doi.org/10.1016/S0022-0728(98)00306-4

[13]   Pongviratchai, P. and Park, J.W. (2007) Electrical Conductivity and Physical Properties of Surimi-Potato Starch under Ohmic Heating. Journal of Food Science, 72, 1750-3841. http://dx.doi.org/10.1111/j.1750-3841.2007.00524.x

[14]   Sastry, S.K., Sarang, S. and Knipe, L. (2008) Electrical Conductivity of Fruits and Meats during Ohmic Heating. Journal of Food Engineering, 87, 351-356. http://dx.doi.org/10.1016/j.jfoodeng.2007.12.012

 
 
Top