JSEMAT  Vol.4 No.3 , April 2014
Nanocomposites Based on Conducting Polymers and Functionalized Carbon Nanotubes with Different Dopants Obtained by Electropolymerization
ABSTRACT

Nanocomposite films based on poly (3,4-ethylenedioxy thiophene) (PEDOT), functionalized single-walled carbon nanotubes and different dopants were studied. It was fabricated by a simple oxidative electropolymerization method. The dopant substances used were SDS (Sodium dodecyl sulfate) and tiron (1,2-Dihydroxybenzene-3,5-disulfonic acid disodium salt hydrate). These nano-composite films were grown electrochemically from aqueous solutions such that constituents were deposited simultaneously onto substrate electrode. The synthetic, morphological and electrical properties of the nanocomposite films obtained were compared. Scanning electron microscopy (SEM) revealed that the composite films consisted of nanoporous networks of SWCNTS (single-walled carbon nanotubes) coated with polymeric film. Cyclic voltammetry (CV), electro-chemical impedance spectroscopy (EIS) and FT-IR spectroscopy demonstrated that these composite films had similar electrochemical response rates to pure polymeric films but a lower resistance and much improved mechanical integrity. The negatively charged functionalized carbon nano-tubes (CNTSF) served as anionic dopant during the electropolymerization to synthesize polymer/CNTSF composite films. The specific electrochemical capacitance of the composite films is a significantly higher value than that for pure polymer films prepared similarly. Using these composite films, the modified electrodes with improved properties were obtained. (In this paper, for simplicity, the SWANTs-COOH group will be noted CNTsF which means functionalized carbon nanotubes.)


Cite this paper
Branzoi, F. and Branzoi, V. (2014) Nanocomposites Based on Conducting Polymers and Functionalized Carbon Nanotubes with Different Dopants Obtained by Electropolymerization. Journal of Surface Engineered Materials and Advanced Technology, 4, 164-179. doi: 10.4236/jsemat.2014.43020.
References
[1]   Ajayan, P.M., Stephan, O., Colliex, C. and Trauth, D. (1994) Aligned Carbon Nanotube Arrays Formed by Cutting a Polymer Resin—Nanotube Composite. Science, 265, 1212-1214.
http://dx.doi.org/10.1126/science.265.5176.1212

[2]   Dai, L. and Mau, A.W.H. (2001) Controlled Synthesis and Modification of Carbon Nanotubes and C60: Carbon Nanostructures for Advanced Polymeric Composite Materials. Advanced Materials, 13, 899-913.
http://dx.doi.org/10.1002/1521-4095(200107)13:12/13<899::AID-ADMA899>3.0.CO;2-G

[3]   Baughman, R.H., Zakhidov, A.A. and Heer, W.A. (2002) Carbon Nanotubes—the Route toward Applications. Science, 297, 787-792. http://dx.doi.org/10.1126/science.1060928

[4]   Liao, Y.Z., Zhang, C., Zhang, Y., Strong, V., Tang, J.S., Li, X.-G., Kalantar-Zadeh, K., Hoek, E., Wang, K. and Kaner, R. (2011) Carbon Nanotube/Polyaniline Composite Nanofibers: Facile Synthesis and Chemosensors. Nano Letters, 11, 954-959. http://dx.doi.org/10.1021/nl103322b

[5]   Dai, L. (1999) Advanced Syntheses and Microfabrications of Conjugated Polymers, C60-Containing Polymers and Carbon Nanotubes for Optoelectronic Applications. Polymers for Advanced Technologies, 10, 357-420.
http://dx.doi.org/10.1002/(SICI)1099-1581(199907)10:7<357::AID-PAT886>3.0.CO;2-9

[6]   Chen, G.Z., Shaffer, M.S.P., Coleby, D., Dioxan, G., Fray, D.J. andWindle, A.H. (2000) Carbon Nanotube and Polypyrrole Composites: Coating and Doping. Advanced Materials, 12, 522-526.
http://dx.doi.org/10.1002/(SICI)1521-4095(200004)12:7<522::AID-ADMA522>3.0.CO;2-S

[7]   Saito, Y., Uemura, S. and Hamaguchi, K. (1998) Cathode Ray Tube Lighting Elements with Carbon Nanotube Field Emitters. Japanese Journal of Applied Physics, 37, L346-L348.
http://dx.doi.org/10.1143/JJAP.37.L346

[8]   Liao, Y., Zhang, C., Wang, X., Li, X.G., Ippolito, S.J., Kalantar-Zadeh, K. and Kaner, R.B. (2011) Carrier Mobility of Single-Walled Carbon Nanotube-Reinforced Polyaniline Nanofibers. The Journal of Physical Chemistry C, 115, 16187-16192. http://dx.doi.org/10.1021/jp2053585

[9]   Prunâ, A., Branzoi, V. and Branzoi, F. (2011) Ordered Arrays of Copper Nanowires Enveloped in Polyaniline Nanotubes. Journal Applied Electrochemistry, 41, 77-81.
http://dx.doi.org/10.1007/s10800-010-0209-4

[10]   Shirakwa, H. (2001) The Discovery of Polyacetylene Film: The Dawning of an Era of Conducting Polymers (Nobel Lecture). Angewandte Chemie International Edition, 40, 2574-2580.
http://dx.doi.org/10.1002/1521-3773(20010716)40:14<2574::AID-ANIE2574>3.0.CO;2-N

[11]   Groenendaal, B.L., Jonas, F., Freitag, D., Pielartzik, H. and Reynolds, J.R. (2000) Poly(3,4-Ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future. Advanced Materials, 12, 481-494.

[12]   Crispin, X., Jakobsson, F.L.E., Crispin, A., Grim, P.C.M., Andersson, P., Volodin, A., van Haesendonck, C., Van der Auweraer, M., Salaneck, W.R. and Berggren, M. (2006) The Origin of the High Conductivity of Poly(3,4-Ethylene-dioxythiophene)-Poly(Styrenesulfonate) (PEDOT-PSS) Plastic Electrodes. Chemistry of Materials, 18, 4354-4360.
http://dx.doi.org/10.1021/cm061032+

[13]   Breiby, D.W., Samuelsen, L.B. and Groenendaal, B. (2003) Smectic Structures in Electrochemically Prepared Poly(3,4-Ethylenedioxythiophene) Films. Journal of Polymer Science Part B: Polymer Physics, 41, 945-952.
http://dx.doi.org/10.1002/polb.10412

[14]   Winther-Jensen, B. and West K. (2006) Stability of Highly Conductive Poly-3,4-Ethylene-Dioxythiophene. Reactive and Functional Polymers, 66, 479-483.
http://dx.doi.org/10.1016/j.reactfunctpolym.2005.08.007

[15]   Kros, A., Sommerdijk, N.A.J.M. and Nolte R.J.M. (2005) Poly(Pyrrole) versus Poly(3,4-Ethylenedioxythiophene): Implications for Biosensor Applications. Sensors and Actuators B: Chemical, 106, 289-295.
http://dx.doi.org/10.1016/j.snb.2004.08.011

[16]   Luo, S.C., Mohamed Ali, E., Tansil, N.C., Yu, H.H., Gao, S. and Ying, J.Y. (2008) Poly(3,4-ethylenedioxythiophene) (PEDOT) Nanobiointerfaces: Thin, Ultrasmooth, and Functionalized PEDOT Films with in Vitro and in Vivo Bio-compatibility. Langmuir, 24, 8071-8077.
http://dx.doi.org/10.1021/la800333g

[17]   Du, X. and Wang, Z. (2003) Effects of Polymerization Potential on the Properties of Electrosynthesized PEDOT Films. Electrochimica Acta, 48, 1713-1717.
http://dx.doi.org/10.1016/S0013-4686(03)00143-9

[18]   Li, L., Loveday, D.C., Mudigonda, D.S.K. and Ferraris, J.P. (2002) Effect of Electrolytes on Performance of Electrochemical Capacitors Based on Poly[3-(3,4-difluorophenyl)thiophene]. Journal of the Electrochemical Society, 149, A1201-A1207. http://dx.doi.org/10.1149/1.1498840

[19]   Branzoi, V., Prunâ, A. and Branzoi, F. (2008) Electrosynthesized Doped Polypyrrole Films on Pure Zinc Electrode. Molecular Crystal and Liquid Crystals, 485, 853-861.
http://dx.doi.org/10.1080/15421400801922486

[20]   Branzoi, V., Branzoi, F. and Pilan, L. (2009) Characterization of Electrodeposited Polymeric and Composite Modified Electrodes on Cobalt Based Alloy. Materials Chemistry and Physics, 118, 197-203.
http://dx.doi.org/10.1016/j.matchemphys.2009.07.020

[21]   Ago, H., Petritch, K., Shaffer, M.S.P., Windle, A.H. and Friend, R.H. (1999) Composites of Carbon Nanotubes and Conjugated Polymers for Photovoltaic Devices. Advanced Materials, 11, 1281-1285.
http://dx.doi.org/10.1002/(SICI)1521-4095(199910)11:15<1281::AID-ADMA1281>3.0.CO;2-6

[22]   Hughes, M., Chen, G.Z., Shaffer, M.S., Fray, D.J. and Windle, A.H. (2002) Electrochemical Capacitance of a Nano-porous Composite of Carbon Nanotubes and Polypyrrole. Chemistry of Materials, 14, 1610-1613.

[23]   Downs, C., Nuget, J., Ajayan, P.M., Duquette, D.J. and Santhanam, K.S.V. (1999) Growth from Surface Methodology for the Fabrication of Functional Dual Phase Conducting Polymer Polypyrrole/Polycarbazole/Polythiophene (cp/Polypyr/Polycbz/Polyth)-Carbon Nanotube (cnt) Composites of Controlled Morphology and Composition—Sidewall Vers. Advanced Materials, 12, 1028.

[24]   Peng, C., Jin, J. and Chen, G.Z. (2007) A Comparative Study on Electrochemical Co-Deposition and Capacitance of Composite Films of Conducting Polymers and Carbon Nanotubes. Electrochimica Acta, 53, 525-537.
http://dx.doi.org/10.1016/j.electacta.2007.07.004

[25]   Wang, J., Dai, J. and Yarlagadda, T. (2005) Carbon Nanotube-Conducting-Polymer Composite Nanowires. Langmuir, 21, 9-12. http://dx.doi.org/10.1021/la0475977

[26]   Tsai, Y.C., Li, S.C. and Liao, S.W. (2006) Electrodeposition of Polypyrrole-Multiwalled Carbon Nanotube-Glucose Oxidase Nanobiocomposite Film for the Detection of Glucose. Biosensors and Bioelectronics, 22, 495-500.
http://dx.doi.org/10.1016/j.bios.2006.06.009

[27]   Chen, J., Hamon, M.A., Hu, H., Chen, Y., Rao, A.M., Eklund, P.C. and Haddon, R.C. (1998) Solution Properties of Single-Walled Carbon Nanotubes. Science, 282, 95-98.
http://dx.doi.org/10.1126/science.282.5386.95

[28]   Chen, Y., Haddon, R.C., Fang, S., Rao, A.M., Eklund, P.C., Lee, W.H., Dickey, E.C., Grulke, E.A., Pendergrass, J.C., Chavan, A., Haley, B.E. and Smalley, R.E. (1998) Chemical Attachment of Organic Functional Groups to Single-Walled Carbon Nanotube Material. Journal of Materials Research, 13, 2423-2431.
http://dx.doi.org/10.1557/JMR.1998.0337

[29]   Holzinger, M., Vostrowsky, O., Hirsch, A., Hennrich, F., Kappes, M., Weiss, R. and Jellen, F. (2001) Sidewall Functionalization of Carbon Nanotubes. Angewandte Chemie International Edition, 40, 4002-4005.
http://dx.doi.org/10.1002/1521-3773(20011105)40:21<4002::AID-ANIE4002>3.0.CO;2-8

[30]   Dyke, C.A. and Tour, J.M. (2003) Unbundled and Highly Functionalized Carbon Nanotubes from Aqueous Reactions. Nano Letters, 3, 1215-1218. http://dx.doi.org/10.1021/nl034537x

[31]   Saini, R.K., Chiang, I.W., Peng, H., Smalley, R.E., Billups, W.E., Hauge, R.H. and Margrave, J.L. (2003) Covalent Sidewall Functionalization of Single Wall Carbon Nanotubes. Journal of the American Chemical Society, 125, 3617-3621. http://dx.doi.org/10.1021/ja021167q

[32]   Dyke, C.A. and Tour, J.M. (2003) Solvent-Free Functionalization of Carbon Nanotubes. Journal of the American Chemical Society, 125, 1156-1157. http://dx.doi.org/10.1021/ja0289806

[33]   Williams, K.A., Veenhuizen, P.T.M., de la Torre, B.G., Eritja, R. and Dekker, C. (2002) Nanotechnology: Carbon Nanotubes with DNA Recognition. Nature, 420, 761. http://dx.doi.org/10.1038/420761a

[34]   Niyogi, S., Hamon, M.A., Hu, H., Zhao, B., Bhowmik, P., Sen, R., Itkis, M.E. and Haddon, R.C. (2002) Chemistry of Single-Walled Carbon Nanotubes. Accounts of Chemical Research, 35, 1105-1113.
http://dx.doi.org/10.1021/ar010155r

[35]   Kamaras, K., Itkis, M.E., Hu, H., Zhao, B. and Haddon, R.C. (2003) Covalent Bond Formation to a Carbon Nanotube Metal. Science, 301, 1501. http://dx.doi.org/10.1126/science.1088083

[36]   Chen, J., Rao, A.M., Lyuksyutov, S., Itkis, M.E., Hamon, M.A., Hu, H., Cohn, R.W., Eklund, P.W., Colbert, D.T., Smalley, R.E. and Haddon, R.C. (2001) Dissolution of Full-Length Single-Walled Carbon Nanotubes. Journal of Physical Chemistry B, 105, 2525-2528. http://dx.doi.org/10.1021/jp002596i

[37]   Zhao, B., Hu, H. and Haddon, R.C. (2004) Synthesis and Properties of a Water-Soluble Single-Walled Carbon Nanotube-Poly(m-aminobenzene sulfonic acid) Graft Copolymer. Advanced Functional Materials, 14, 71-76.
http://dx.doi.org/10.1002/adfm.200304440

[38]   Jurewiez, K., Delpeux, S., Bertagna, V., Beguin, F. and Frackowiak, E. (2001) Supercapacitors from Nanotubes/Polypyrrole Composites. Chemical Physics Letters, 347, 36-40.
http://dx.doi.org/10.1016/S0009-2614(01)01037-5

[39]   Gupta, V. and Miura, N. (2006) Polyaniline/Single-Wall Carbon Nanotube (PANI/SWCNT) Composites for High Performance Supercapacitors. Electrochimica Acta, 52, 1721-1726.
http://dx.doi.org/10.1016/j.electacta.2006.01.074

[40]   Xiao, Q. and Zhou, X. (2003) The Study of Multiwalled Carbon Nanotube Deposited with Conducting Polymer for Supercapacitor. Electrochimica Acta, 48, 575-580. http://dx.doi.org/10.1016/S0013-4686(02)00727-2

[41]   Zeng, J.X., Wei, W.Z., Wu, L., Liu, X.Y., Liu, K. and Li, Y. (2006) Fabrication of Poly(toluidine blue O)/Carbon Nanotube Composite Nanowires and Its Stable Low-Potential Detection of NADH. Journal of Electroanalytical Chemistry, 595, 152-160.
http://dx.doi.org/10.1016/j.jelechem.2006.07.014

[42]   Ferrer-Anglada, N., Kaempgen, M. and Roth, S. (2006) Transparent and Flexible Carbon Nanotube/Polypyrrole and Carbon Nanotube/Polyaniline pH Sensors. Physica Status Solidi (b), 243, 3519-3523.
http://dx.doi.org/10.1002/pssb.200669220

[43]   Santhosh, P., Manesh, K.M., Lee, K.P. and Gopalan, A.I. (2006) Enhanced Electrocatalysis for the Reduction of Hydrogen Peroxide at New Multiwall Carbon Nanotube Grafted Polydiphenylamine Modified Electrode. Electroanalysis, 18, 894-903. http://dx.doi.org/10.1002/elan.200503474

[44]   Lu, G.W., Li, C., Shen, J.Y., Chen, Z.J. and Shi, G.Q. (2007) Preparation of Highly Conductive Gold-Poly(3,4-ethylenedioxythiophene) Nanocables and Their Conversion to Poly(3,4-ethylenedioxythiophene) Nanotubes. Journal of Physical Chemistry C, 111, 5926-5931.
http://dx.doi.org/10.1021/jp070387t

[45]   Ingan, O. (1997) Handbook of Conducting Polymers. Vol. 2, Wiley, New York, 785.

 
 
Top