Modeling, Steady-State Analysis of a SEPIC dc-dc Converter Based on Switching Function and Harmonic Balance Technique
Abstract: The paper presents modeling approach of a Single Ended Primary Inductance Converter (SEPIC) system. The complete model derivation of the SEPIC converter system has been presented in different modes of operation. Steady state and small signal analysis was carried out on the converter dynamic equations using the method of Harmonic balance Technique. The steady state variables and their respective ripple quantities obtained were plotted against duty ratio D. The results obtained for a supply input voltage of 60 volts to the converter at a duty ratio of D = 0.8 , compares well with simulation results.
Cite this paper: Taiwo, A. and Oricha, J. (2014) Modeling, Steady-State Analysis of a SEPIC dc-dc Converter Based on Switching Function and Harmonic Balance Technique. Journal of Power and Energy Engineering, 2, 704-711. doi: 10.4236/jpee.2014.24094.
References

[1]   Aranda, E.D., Galan, J.A.G., de Cardona, M.S. and Marquez, J.M.A. (2009) Measuring the I-V Curve of PV Generators. Industrial Electronic Magazine, 3, 4-14. http://dx.doi.org/10.1109/MIE.2009.933882

[2]   Akbaba, M. and Akbaba, M.C. (2001) Dynamic Performance of a Photovoltaic-Boost Converter Powered dc Motor-Pump System. IEEE Electric Machines and Drive Conference, 356-361.

[3]   Rivetta, C. and Jayabalan, R. (2006) Analysis and Control of Buck dc-dc Converter Operating with Constant Power Load in Sea and Undersea. IEEE Transaction on Industrial Applications, 42, 559-572. http://dx.doi.org/10.1109/TIA.2005.863903

[4]   Nardo, A.D., Fermia, N., Nicolo, M., Petrone, G. and Soagnuolo, G. (2008) Power Stage Design of Fourth Order dc-dc Converter by Means of Principal Component Analysis. IEEE Transaction on Power Electronics, 23, 2867-2877.

[5]   Yang S., Goto K., Imamura, Y. and Shoyama, M. (2012) Dynamic Characteristics Model of Bi-Directional dc-dc Converter Using State Space Averaging Method. IEEE Telecommunications Energy Conference (INTELEC), 1-5.

[6]   Veerachary, M. (2012) Two-Loop Controlled Buck-SEPIC Converter for Input Source Power Management. IEEE Transaction on Industrial Electronics, 59, 4075-4087. http://dx.doi.org/10.1109/TIE.2011.2174530

[7]   Karimi-Davijani, H. and Ojo, O. (2011) Modeling and Steady-State Analysis of a Stand-Alone Potovoltaic Three Phase Inverter Power System. IEEE Applied Electronics Conference and Exposition (APEC), 1259-1266.

[8]   Edwin, K. (2006) Advance Engineering Mathematics. 9th Edition, Wiley International Edition.

Top