JPEE  Vol.2 No.4 , April 2014
Study on Surface Electric Field Simulation of High Voltage Transmission Line Assembly
Abstract: For the studies in the field of high voltage power transmission, this paper has adopted the method of finite element node potential, and put forward two kinds of high pressure sensor-fixture modeling scheme for the sensor-fixture of the high voltage side, the simulation analysis shows that the sensor-fixture surface should be smooth, and should not appear the conclusion of edges and corners. While through establishing the four clamps assembly optimized model, and simulates the strain gages, fixtures and conductor surface field strength and electric field distribution in the model as a whole in turn, this paper Finally got the optimal size of fixture structure and assembly of each part reasonable location layout.
Cite this paper: Chen, L. , Lai, W. , Wang, J. , Jiang, G. , Zhou, Y. , Chen, Y. , Liu, H. , Qin, Z. , Ke, L. , Wang, L. and Shen, Y. (2014) Study on Surface Electric Field Simulation of High Voltage Transmission Line Assembly. Journal of Power and Energy Engineering, 2, 554-563. doi: 10.4236/jpee.2014.24075.

[1]   Wang, J.-Y., Fang, C.-E., Dai, Y.-S., Li, W. and Hou, X.-Y. (2007) Electric Field Calculation and Optimal Design of 35 kV Contactor Box. High Voltage Engineering, 33, 63-65.

[2]   Zhang, Y.-J., Li, X., Liu, H.-B. and Sun, H.-H. (2012) Calculation and Optimization of Electric Field for 220 kV Composite Hollow Insulators. North China Electric Power, 6, 16-19.

[3]   Yang, Y. (2013) Calculation and Analysis of Total Electric Field at Ground Level beneath 800 kV DC Transmission Lines With Out-of-Operational Negative Pole Line. Power System Technology, 37, 1531-1535.

[4]   Huang, D.C., Ruan, J.J., Chen, Y., Huo, F., Yu, S.F. and Liu, S.B. (2008) Study on the Voltage and Electric Field Distribution along Composite Insulator of 1000 kV AC Transmission Line. Proceedings of the CSEE, 52-57.

[5]   Li, Y. and Zhu, L.-X. (2013) Main Insulation Electric Field Calculation and Analysis Software for Power Transformer. Transformer, 50, 52-56.

[6]   Jiang, X. and Wang, Z.Y. (2004) Calculation and Analysis for the Electric Field of Composite High Voltage Bushing. High Voltage Engineering, 30, 17-21.

[7]   Lin, X., Cai, Q., Xu, J.-Y. and Li, S. (2011) Large Scale of Electric Field Calculation of 1100 kV Disconnector Based on Domain Decomposition Method. High Voltage Apparatus, 47, 1-6.

[8]   Zhou, X.X., Lu, T.B., Cui, X., Zhen, Y.Z and Luo, Z.N. (2011) A Hybrid Method for the Simulation of Ion Flow Field of HVDC Transmission Lines Based on Finite Element Method and Finite Volume Method. Proceedings of the CSEE, 31, 127-133.

[9]   Huang, D.-C., Ruan, J.-J. and Liu, S.-B. (2010) Potential Distribution along UHV AC Transmission Line Composite Insulator and Electric Field Distribution on the Surface of Grading Ring. High Voltage Engineering, 36, 1442-1447.

[10]   Huang, D.-C., Wei, Y.-H., Zhong, L.-H., Ruan, J.-J. and Huang, F.-C. (2007) Discussion on Several Problems of Developing UHVDC Transmission in China. Power System Technology, 31, 6-12.

[11]   Sun, C.-H., Zong, W., Li, S.-Q., Peng, Y.-H. and Ren, W.-W. (2006) A More Accurate Calculation Method of Surface Electric Field Intensity of Bundled Conductors. Power System Technology, 30, 92-96.

[12]   Liu, G., Li, L., Zhao, X.J., Li, W.P., Li, B., Sun, Y.L., Ji, F. and Li, J.Z. (2012) Analysis of Nonlinear Electric Field of Oil-Paper Insulation under AC-DC Hybrid Voltage by Fixed Point Method Combined with FEM in Frequency Domain. Proceedings of the CSEE, 32, 154-161.

[13]   Zhen, Y.Z., Cui, X., Luo, Z.N., Lu, T.B., Lu, J.Y., Yang, Y., Liu, Y.Q., Han, H. and Ju, Y. (2011) FEM for 3D Total Electric Field Calculation near HVDC Lines. Transactions of China Electrotechnical Society, 26, 153-160.