Back
 JPEE  Vol.2 No.4 , April 2014
Simulation Model of Shipboard Low Voltage Molded Case Circuit Breaker Based on PSCAD/EMTDC
Abstract: A simulation model of shipboard low voltage molded case circuit breaker (MCCB) is developed based on power system simulation software PSCAD/EMTDC. The motion characteristic of the magnetic instantaneous acting trip based on electromagnetic characteristic analysis and Cassie arc model are applied into the simulation model to describe the dynamic behavior of the MCCB during short-circuit protection. The results of short-circuit interruption experiments verify the simulation model. It demonstrates that the simulation model has good prospect in optimizing the design and protection performance of MCCB.
Cite this paper: Huang, J. , Shen, B. and Yang, F. (2014) Simulation Model of Shipboard Low Voltage Molded Case Circuit Breaker Based on PSCAD/EMTDC. Journal of Power and Energy Engineering, 2, 532-540. doi: 10.4236/jpee.2014.24072.
References

[1]   Kawase, Y., Mori, H. and Ito, S. (1997) 3-D Element Analysis of Electrodyanmic Repulsion Forces in Stationary Electric Contacts Taking into Account Asymmetric Shape. IEEE Transactions on Magnetics, 33, 1994-1999. http://dx.doi.org/10.1109/20.582692

[2]   Tto, S. and Takato, Y. (1998) Numerical Analysis of Electromagnetic Forces in Low Voltage AC Circuit Breakers Using 3-D Finite Element Method Taking into Account Eddy Currents. IEEE Transactions on Magnetics, 34, 2597-2600. http://dx.doi.org/10.1109/20.717600

[3]   Stammberger, H. (1998) Force Calculation for the Movable Contact of Circuit Breakers. Proceedings of the 19th International Conference on Electric Contact Phenomena, Nuremberg, 14-17.

[4]   Atienza, E., Perrault, M. and Wurtz, F. (2000) A Methodology for the Sizing and the Optimization of An Electromagnetic Release. IEEE Transactions on Magnetics, 36, 1659-1663. http://dx.doi.org/10.1109/20.877761

[5]   Bizjak, G., Zunko, P. and Povh, D. (1995) Circuit Breaker Model for Digital Simulation Based on Mayr’s and Cassie’s Differential Arc Equations. IEEE Transactions on Power Delivery, 10, 1310-1315. http://dx.doi.org/10.1109/61.400910

[6]   Schavemaker, P.H. and van der Sluis, L. (2000) An Improved Mayr Type Arc Model Based on Current-Zero Measurements. IEEE Transactions on Power Delivery, 15, 580-584. http://dx.doi.org/10.1109/61.852988

[7]   Rong, M.Z., Yang, F., Wu, Y., Murphy, A.B., Wang, W.Z. and Guo, J. (2010) Simulation of Arc Characteristics in Miniature Circuit Breaker. IEEE Transactions on Plasma Science, 38, 2306-2311. http://dx.doi.org/10.1109/TPS.2010.2050703

[8]   Wang, Q., Li, X.W., Chen, D.G. and Rong, M.Z. (2010) Simulation of the Venting Configuration Effects on Arc Plasma Motion in Low-Voltage Circuit Breaker. IEEE Transactions on Plasma Science, 38, 2300-2305. http://dx.doi.org/10.1109/TPS.2010.2049382

[9]   Dommel, H.W. (1986) EMTP Theory Book. Bonneville Power Administration, Portland.

 
 
Top