JPEE  Vol.2 No.4 , April 2014
Dynamic Equivalent Method of Motor Loads for Power Systems Based on the Weighted
Abstract: Dynamic equivalence can not only largely reduce the system size and the computation time but also stress the dominant features of the system [1]-[3]. This paper firstly recommends the basic concept of dynamic equivalent and the status of both domestic and abroad development in this area. The most existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors. In addition, the existing polymerization method which is based on the frequency domain algorithm of induction electric machines parameters takes a long time to equivalent for the large system, then the new method based on the weighted is proposed. Then, the basic steps for dynamic equivalence with the weighted method are introduced as follows. At first, the clustering criterion of motor loads based on time domain simulation is given. The motors with similar dynamic characteristics are classified into one group. Then, the simplication of the buses of motors in same group and network is carried out. Finally, parameters of the equivalent motor are calculated and the equivalent system is thus obtained based on the weighted. This aggregation method is applied to the simple distribution system of 4 generators. Simulation results show that the method can quickly obtain polymerization parameters of generator groups and the aggregation model retains the dynamic performance of the original model with good accuracy, the active and reactive power fitting error is smaller as well.
Cite this paper: Hong, B. , Hu, H. , Chen, T. and Li, Q. (2014) Dynamic Equivalent Method of Motor Loads for Power Systems Based on the Weighted. Journal of Power and Energy Engineering, 2, 416-422. doi: 10.4236/jpee.2014.24056.

[1]   Zhou, X.X. (1997) To Develop Power System Technology Suitable to the Need in 21st Century. Power System Technology, 21, 11-15.

[2]   Ni, Y.X. (2002) Dynamic Power System Theory and Analysis. Tsinghua University Press, Beijing.

[3]   Yu, Y.X. and Chen, L.Y. (1988) Power System Security and Stability. Science Press, Beijing.

[4]   Chen, L.Y. and Sun, D.F. (1989) Aggregation of Generating Unit Parameters in the System Dynamic Equivalents. Proceedings of the CESS, 9, 30-39.

[5]   Min, Y. and Han, Y.D. (1991) Co-Frequency Dynamic Equivalence Approach for Calculation of Power System Frequency Dynamics. Proceedings of the CESS, 11, 29-36.

[6]   Zhou, Y.H., Li, X.S., Hu, X.Y., et al. (1999) Dynamic Equivalents Based on the Transient Power Flow of the Connecting Lines. Proceedings of the CSU-EPSA, 11, 29-33.

[7]   Xu, J.B., Xue, Y.S., Zhang, Q.P., et al. (2005) A Critical Review on Coherency-Based Dynamic Equivalences. Automation of Electric Power Systems, 29, 92-95.

[8]   Wang, G. and Zang, B.M. (2006) External Online Dynamic Equivalents of Power System. Power System Technology, 30, 21-26.

[9]   Wen, B.J., Zhang, H.B. and Zhang, B.M. (2004) Design of a Real-Time External Network Auto-Equivalence System of Subtransmission Networks in Guangdong. Automation of Electric Power Systems, 28, 77-79.

[10]   Jiang, W.Y., Wu, W.C., Zhang, B.M., et al. (2007) Network model reconstruction in online security eEarly warning system,” Automation of Electric Power Systems, 31, 5-9.

[11]   Hu, J. and Yu, Y.X. (2006) A Practical Method of Parameter Aggregation for Power System Dynamic Equivalence. Power System Technology, 30, 24-30.

[12]   Ju, P., Wang, W.H., Xie, H.J., et al. (2007) Identification Approach to Dynamic Equivalents of the Power System Interconnected with Three Areas. Proceedings of the CESS, 27, 29-34.

[13]   Price, W.W., Chow, J.H. and Haqgave, A.W. (1998) Large-Scale System Testing of Power System Dynamic Equivalence Program. IEEE Transactions on Power Systems, 13, 768-774.

[14]   Sebastiao, E.M., Oliveira, D. and De Queiroz, J.F. (1988) Modal Dynamic Equivalent for Electric Power Systems. IEEE Transactions on Power Systems, 3, 1723-1730.

[15]   Joe, H.C., Galarza, R., Accari, P., et al. (1995) Inertial and Slow Coherency Aggregation Algorithms for Power System Dynamic Model Reduction. IEEE Transactions on Power Systems, 10, 680-685.

[16]   Wallace do, C.B., Reza, M.I. and Amauri, L. (2004) Robust Sparse Network Equivalent for Large Systems: Part I-Methodology. IEEE Transactions on Power Systems, 19, 157-163.

[17]   Zhou, H.Q., Ju, P., Yang, H., et al. (2010) Dynamic Equivalent Method of Interconnected Power Systems with Consideration of Motor Loads. Science China Technological Sciences, 53, 902-908.