The optimizations of constrained layered damped (CLD) laminated structures are discussed in this study. Genetic algorithms (GAs) are employed as the search tool for optimization because these algorithms are suitable for solving optimization problems involving multiple discrete variable combinations. The numerical computation packages, ANSYS and MATLAB, have been used to estimate the optimum stacking sequence of CLD laminated structures. MATLAB package is used to achieve GAs process, and ANSYS package is used to proceed the structural analysis. This study successfully developed a numerical simulation mechanism for optimizing CLD adhesion efficiency by implementing GAs and the finite element method. The loss coefficients of the CLD damping layer vary with vibration frequency and failure constraints of CLD laminated plates are considered in objective function. In addition, the modified plasticity analysis (MPA) is used to increase the search efficiency of GAs and simply plastic analysis.
 Mujika, F., Vargas, G., Ibarretxe, J., Gracia, J.D. and Arrese, A. (2012) Influence of the Modification with MWCNT on the Interlaminar Fracture Properties of Long Carbon Fiber Composites. Composites Part B, 43, 1336-1340.
 Kousourakis, A., Mouritz, A.P. and Bannister, M.K. (2006) Interlaminar Properties of Polymer Laminates Containing Internal Sensor Cavities. Composite Structures, 75, 610-618.
 Li, Y., Hori, N., Arai, M., Hu, N., Liu, Y. and Fukunaga, H. (2009) Improvement of Interlaminar Mechanical Properties of CFRP Laminates Using VGCF. Composites Part A, 40, 12, 2004-2012.
 Luo, G.M. and Lee, Y.J. (2011) Quasi-Static Simulation of Constrained Layered Damped Laminated Curvature Shells Subjected to Low-Velocity Impact. Composites Part B, 42, 1233-1243.
 Luo, G.M. (2012) Estimate of CLD Increase Laminated Plate and Shell Low-Velocity Impact Strength. World Journal of Engineering, 9, 319-330.
 Kere, P. and Koski, J. (2001) Multicriterion Stacking Sequence Optimization Scheme for Composite Laminates Subjected to Multiple Loading Conditions. Composite Structures, 54, 225-229.
 Rama Mohan Rao, A. and Arvind N. (2005) A Scatter Search Algorithm for Stacking Sequence Optimization of Laminate Composites. Composite Structures, 70, 383-402.
 Matsuzaki, R. and Todoroki, A. (2007) Stacking-Sequence Optimization Using Fractal Branch-and-Bound Method for Unsymmetrical Laminates. Composite Structures, 78, 537-550.
 Aymerich, F. and Serra, M. (2008) Optimization of Laminate Stacking Sequence for Maximum Buckling Load Using the Ant Colony Optimization (ACO) Metaheuristic. Composites: Part A, 39, 262-272.
 Nagendra, S., Haftka, R.T. and Gurdal, Z. (1992) Stacking Sequence Optimization of Simply Supported Laminates with Stability and Strain Constraints. AIAA Journal, 30, 2132-2137.
 Rahul, Sandeep, G., Chakraborty, D. and Dutta, A. (2006) Multi-Objective Optimization of Hybrid Laminates Subjected to Transverse Impact. Composite Structures, 73, 360-369.
 António, C. (2006) A Hierarchical Genetic Algorithm with Age Structure for Multimodal Optimal Design of Hybrid Composites. Structure Multidisc Optimization, 31, 280-294.
 Azarafza, R., Khalili, S.M.R., Jafari, A.A. and Davarb, A. (2009) Analysis and Optimization of Laminated Composite Circular Cylindrical Shell Subjected to Compressive Axial and Transverse Transient Dynamic Loads. Thin-Walled Structures, 47, 970-983.
 Honda, S. and Narita, Y. (2011) Vibration Design of Laminated Fibrous Composite Plates with Local Anisotropy Induced by Short Fibers and Curvilinear Fibers. Composite Structures, 93, 902-910.
 Lee, Y.J. and Huang, C.H. (2003) Ultimate Strength and Failure Process of Composite Laminated Plates Subjected to Low-Velocity Impact. Reinforced Plastics and Composite, 22, 1059-1081.
 Luo, G.M. and Lee, Y.J. (2009) Simulation of Constrained Layered Damped Laminated Plates Subjected to Low-Velocity Impact Using a Quasi-Static Method. Composite Structures, 88, 290-295.