JPEE  Vol.2 No.4 , April 2014
Power Quality Improvement Strategy for Wind Energy Conversion System
Abstract: Wind energy is one of the world's fastest growing energy technologies, as wind is an intermittent renewable source, the wind source extracted by a wind turbine is therefore not constant. For this reason, the fluctuation of wind power results in fluctuated power output from wind turbine generator. From the point of view of utilities, due to the fluctuation of generator output, it’s not appropriate for the generator to be directly connected to the power grid. In order to achieve the condition that the generator output power is suitable for grid-connection, it is necessary to use a controller to manage the output produced by the wind turbine generator. This paper proposes a novel control scheme of a three-phase grid-connected wind energy conversion system to improve the power quality of WECS. The WECS model consists of a permanent magnet generator and the electronic power conditioning system is composed of full bridge rectifier, close loop boost converter, three phase inverter. Wind generation is being increasingly connected at distribution level due to increasing load demand. The inverter is controlled to perform following function 1) power converter to inject power generated from WECS to the grid, and 2) shunt APF to compensate current unbalance, load current harmonics, load reactive power demand Validation of the proposed system is verified through MATLAB/Simulink simulation.
Cite this paper: Gandhare, W. and Hete, S. (2014) Power Quality Improvement Strategy for Wind Energy Conversion System. Journal of Power and Energy Engineering, 2, 186-192. doi: 10.4236/jpee.2014.24026.

[1]   Krim, F. (2011) Parameter Estimation of Shunt active Filter for Power Quality Improvement, 306-311.

[2]   Renders, B., De Gusseme, K., Ryckaert, W.R., Stockman, K., Vandevelde, L. and Bollen, M.H.J. (2008) Distributed Generation for Mitigating Voltage Dips in Low-Voltage Distribution Grids. IEEE Transactions on Power Delivery, 23, 1581-1588.

[3]   Vodyakho, O. and Kim, T. (2009) Shunt Active Filter Based on Three-Level Inverter for 3-Phase Four-Wire Systems. IET proceedings on Power Electronics, 2, 216-226.

[4]   Akagi, H., Kanazawa, Y. and Nabae, A. (1983) Generalized Theory of Instantaneous Reactive Power in Three Phase Cicuits. IPEC’83—Int Power Electronics Conference, Tokyo, 1375-1386.

[5]   Fouson, J., Aredes, M., Watanabe, E. and Martins, J. (2000) Shunt Active Filter for Power Quality Improvement. International Conference UIE 2000—Electricity for Sustainable Urban Development, Lisboa, 1-4.

[6]   Nejad, M., Meibody-Tabar, F., et al. (2007) Study of an Hybrid Current Controller Suitable for DC-DC or DC-AC Applications. IEEE Transactions on Power Electronics, 22, 2176-2186.

[7]   Carrasco, J.M., Franquelo, L.G., Bialasiewicz, J.T., Galvn, E., Guisado, R.C.P., Prats, M.M., Len, J.I. and Alfonso, N.M. (2006) Powerelectronic Systems for the Grid Integration of Renewable Energy Sources: A Survey. IEEE Transactions on Industrial Electronics, 53, 1002-1016.

[8]   Gupta, J. and Kumar, A. (2012) Fixed Pitch Wind Turbine Based Permanent Magnet Synchronous Machine Model for Wind Energy Conversion System. Journal of Engineering and Technology, 2, 52-63.

[9]   Arifujjaman, Md. (2011) Modeling and Simulation of Grid Connected Permanent Magnet Generator (PMG)-Based Small Wind Energy Conversion Systems. The Open Renewable Energy Journal, 4, 13-18.