OJCM  Vol.4 No.2 , April 2014
Interfacial Fracture Toughness Evaluation of Poly(L-lactide acid)/Natural Fiber Composite by Using Double Shear Test Method

In this work, interfacial fracture toughness between treated fiber and matrix was investigated by using double shear test method. Susrface treatment on the oil palm empty fruit bunch (OPEFB) fibers was performed to improve the interfacial bosnding properties of natural fiber reinforced Poly(L-lactide acid) composites. Three fibers model composite and four fibers model composite were prepared for the double shear test. The interfacial fracture toughness of both model composites is dependent on matrix length. In addition, the interfacial fracture toughness and the critical interfacial shear stress were increased with increasing the concentration of NaOH and the duration of surface treatment.

Cite this paper: Sia, C. , Nakai, Y. , Tanaka, H. and Shiozawa, D. (2014) Interfacial Fracture Toughness Evaluation of Poly(L-lactide acid)/Natural Fiber Composite by Using Double Shear Test Method. Open Journal of Composite Materials, 4, 97-105. doi: 10.4236/ojcm.2014.42011.

[1]   Mohanty, A.K., Misra, M. and Drzal, L.T. (2005) Natural Fibers, Biopolymers and Biocomposite. CRC Press, Boca Raton.

[2]   Shinoj, S., Visvanathan, R., Panigrahi, S. and Kochubabu, M. (2011) Oil Palm Fiber (OPF) and Its Composite: A Review. Industrial Crops and Products, 33, 7-22.

[3]   Roy, A., Chakraborty, S., Kundu, S.P., Basak, R.K., Majumder, S.B. and Adhikari, B (2012) Improvement in Mechanical Properties of Jute Fibers through Mild Alkali Treatment as Demonstrated by Utilization of the Weibull Distribution Model. Bioresource Technology, 107, 222-228.

[4]   Gassan, J. and Bledzki, A.K. (1999) Alkali Treatment of Jute Fibres: Relationship between Structure and Mechanical Properties. Journal of Applied Polymer Science, 71, 623-629.<623::AID-APP14>3.0.CO;2-K

[5]   Gu, H. (2009) Tensile Behaviours of the Coir Fibre and Related Composites after NaOH Treatment. Materials and Design, 30, 3931-3934.

[6]   Islam, M.S., Pickering, K.L. and Foreman, N.J. (2010) Influence of Alkali Treatment on the Interfacial and Physico-Mechanical Properties of Industrial Hemp Fibre Reinforced Polylatic Acid Composites. Composites: Part A, 41, 596-603.

[7]   Moshiul Alam, A.K.M., Beg, M.D.H, Reddy Rasad, D.M., Khan, M.R. and Mona, M.F. (2012) Structures and Performances of Simultaneous Ultrasound and Alkali Treated Oil Palm Empty Fruit Bunch Fiber Reinforced Poly(lactic acid) Composites. Composites: Part A, 41, 1921-1929.

[8]   Song, Y.S., Lee, J.T., Sun, J.D. Kim, M.W., Lee, S.H. and Youn, J.R. (2012) Viscoelastic and Thermal Behavior of Woven Hemp Fiber Reinforced Poly(lactic acid) Composites. Composites: Part B, 43, 856-860.

[9]   Day, R.J. and Cauich Rodrigez, J.V. (1998) Investigation of the Micromechanics of the Microbond Test. Composites Science and Technology, 58, 907-914.

[10]   Chou, C.T., Gaur, U. and Miller, B. (1994) The Effect of Microvise Gap Width on Microbond Pull-Out Test. Composites Science and Technology, 51, 111-116.

[11]   Zinck, P, Wagner, H.D., Salmon, L. and Gerard, J.F. (2001) Are Microcomposites Realistic Models of the Fibre/Matrix Interface? I. Micromechanical Modelling. Polymer, 42, 5401-5413.

[12]   Broutman, L.J. (1969) Measurement of the Fiber-Polymer Matrix Interfacial Strength. Interfaces in Composites, ASTM STP 452, 27-41.

[13]   Schlapschi, K.H., Meier, B. and Grathwohl, G. (1994) Evaluation of Interface Parameters in Push-Out and Pull-Out Tests. Composites, 25, 476-481.

[14]   So, C.L. and Young, R.J. (2001) Interfacial Failure in Poly(p-phenylenebenzobisoxazole) (PBO)/Epoxy Single Fibre Pull-Out Specimens. Composites: Part A, 32, 445-455.

[15]   Crews, J.H., Shivakumar, K.N. and Raju, I.S. (1992) A Fibre-Resin Micromechanics Analysis of the Delamination Front in a Double Cantilever Beam Specimen. Phase Interaction in Composite Materials, 396-405.

[16]   Dubois, F. and Keunings, R. (1997) DCB Testing of Thermoplastic Composites: A Non-Linear Micro-Macro Numerical Analysis. Composites Science and Technology, 57, 437-450.

[17]   Tanaka, H. and Nakai, Y. (2004) Three-Dimensional Micromechanics Analysis of Strain Energy Release Rate Distribution along Delamination Crack in FRP. Proceeding of 4th Asian-Australasian Conference on Composite Materials, Sydney, 6-9 July 2004, 439-444.

[18]   Kotaki, M., Hojo, M., Tsujioka, N. and Hamada, H. (1995) Effect of Surface Treatment on Interlaminar/Intralaminar Crack Growth Behavior of CFRP Laminates. Proceeding of 4th Japan International SAMPE Symposium, Tokyo, 25-28 September 1995, 1008-1013.

[19]   Hojo, M., Tsujioka, N., Kotaki, M., Hamada, H., Maekawa, Z. and Ochiai, S. (1995) Effect of Interfacial Strength on Interlaminar and Intralaminar Fracture Toughness of CFRP Laminates. Proceeding of 5th International Symposium on High Technology Composites in Modern Application, Corfu, 18-22 September 1995, 30-36.

[20]   Koiwa, K., Tanaka, H., Nakai, N., Ito, S. and Tukahara, T. (2011) Fracture Mechanics Evaluation of Mode I and Mode II Fiber/Matrix Interfacial Crack by Using Real-Size Model Composite. Proceeding of International Conference on Advanced Technology in Experimental Mechanics, Kobe, 19-21 September 2011.

[21]   ASTM (2004) ASTM D1776-04. Standard Practice for Conditioning and Testing Textiles. American Society for Testing and Materials, Pennsylvania.

[22]   Sia, C., Nakai, Y. and Shiozawa, D. (2013) Influence of Alkali Treatment on the Mechanical Properties of Oil Palm Fibers. Proceeding of 4th Japan Conference on Composite Materials, Japan, 7-9 March 2013.

[23]   Li, X., Tabil, L.G. and Panigrahi, S. (2007) Chemical Treatment of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review. Journal of Polymers and the Environment, 15, 25-33.

[24]   Sreekala, M.S., Kumaran, M.G., Joseph, R. and Thomas, S. (2001) Stress-Relaxation Behaviour in Composites Based on Short Oil-Palm Fibres and Phenol Formaldehyde Resin. Composites Science and Technology, 61, 1175-1188.

[25]   Yousif, B.F. and Tayeb, E.N.S.M. (2007) The Effect of Oil Palm Fibers as Reinforcement on Tribological Performance of Polyester Composites. Surface Review and Letter, 14, 1095-1102.

[26]   Chai, H. (1988) Shear Fracture. International Journal of Fracture, 37, 137-159.

[27]   Daghyani, H.R., Ye, L. and Mai, Y.W. (1995) Constraint Effect on Fracture Behaviour of Adhesive Joints with Different Bond Thickness. Fracture Mechanics. ASTM Special Technical Publication, 1256, 556-571.

[28]   Cheng, Y., Mai, Y.W. and Lin, Y. (2001) Effect of Bond Thickness on Fracture Behaviour in Adhesive Joints. Journal of Adhesive, 75, 27-44.

[29]   Zhandarov, S. and Mader, E. (2005) Characterization of Fiber/Matrix Interface Strength: Application of Different Tests, Approaches and Parameters. Composites Science and Technology, 65, 149-160.

[30]   Gotbatkina, Y.A., Ivanova-Mumjieva, V.G. and Goreberg, A.Y. (1999) Adhesive Strength of Bonds of Polymers with Carbon Fibers at Different Loading Rate. Fibre Chemistry, 31, 405-409.

[31]   Gorbatkina, Y.A. and Ivanova-Mumjieva, V.G. (2009) Adhesion of Polymers to Fiber: Further Elaboration of Pull-Out Method. Polymer Science, 2, 214-216.