The present work describes the viability of a mortar binder based on two industrial by-products: poly(vinyl chloride) (PVC) particles from scrap and anhydrite (CaSO4) from fluorgypsum. Mortar composites were made incorporating different amounts of PVC particles and cured at constant room temperature during various periods of time. From X-ray diffraction, it was possible to follow the hydration process and to estimate the effect of the PVC particles on anhydrite transformation to gypsum (CaSO4·2H2O). Compressive strength from uniaxial testing was measured from stress-strain curves carried out at room temperature. According to these results, the hydration rates of the composites depend on the concentration of PVC particles and there is an enhancement in their compressive strength as particle content increases, reaching values of 36 MPa after 28 days.
 Sadat-Shojai, M. and Bakhshandeh, G.R. (2011) Recycling of PVC Wastes. Polymer Degradation and Stability, 96, 404-415. http://dx.doi.org/10.1016/j.polymdegradstab.2010.12.001
 Yarahmadi, N., Jakubowicz, I. and Martinsson, L. (2003) PVC Floorings as Post Consumer Products for Mechanical Recycling and Energy Recovery. Polymer Degradation and Stability, 79, 439-448.
 Al-Salem, S.M., Lettieri, P. and Baeyens, J. (2009) Recycling and Recovery Routes of Plastic Solid Waste: A Review. Waste Management, 29, 2625-2643. http://dx.doi.org/10.1016/j.wasman.2009.06.004
 Garcia, D., Balart, R. and Parres, F. (2007) Characterization of Blends of Poly(vinyl chloride) Waste for Building Applications. Journal of Material Science, 42, 10143-10151. http://dx.doi.org/10.1007/s10853-007-2067-y
 Martinez-Aguilar, O.A., Castro-Borges, P. and Escalante-García, J.I. (2010) Hydraulic Binders of Fluorogypsum-Portland Cement and Blast Furnace Slag, Stability and Mechanical Properties. Construction and Building Materials, 24, 631-639. http://dx.doi.org/10.1016/j.conbuildmat.2009.11.006
 Garg, M., Jain, N. and Singh, M. (2009) Development of Alpha Plaster from Phosphogypsum for Cementitious Binders. Construction and Building Materials, 23, 3138-3143. http://dx.doi.org/10.1016/j.conbuildmat.2009.06.024
 Fauziah, I., Zauyah, S. and Jamal, T. (1996) Characterization and Land Application of Red Gypsum: A Waste Product from the Titanium Dioxide Industry. Science of the Total Environment, 188, 243-251.
 Prakaypun, W. and Jinawath, S. (2003) Comparative Effect of Additives on the Mechanical Properties of Plasters Made from Flue-Gas Desulfurized and Natural Gypsums. Materials and Structures, 36, 51-58.
 Bediako, M. and Frimpong, A.O. (2013) Alternative Binders for Increased Sustainable Construction in Ghana—A Guide for Building Professionals. Materials Science and Applications, 4, 20-28.
 Colak, A. (2000) Density and Strength Characteristics of Foamed Gypsum. Cement and Concrete Composites, 22, 193-200. http://dx.doi.org/10.1016/S0958-9465(00)00008-1
 Gutiérrez-González, S., Gadea, J., Rodríguez, A., Blanco-Varela, M.T. and Calderón, V. (2012) Compatibility between Gypsum and Polyamide Powder Waste to Produce Lightweight Plaster with Enhanced Thermal Properties. Construction and Building Materials, 34, 179-185. http://dx.doi.org/10.1016/j.conbuildmat.2012.02.061
 Herrero, S., Mayor, P. and Hernandez-Olivares, F. (2013) Influence of Proportion and Particle Size Gradation of Rubber from End-of-Life Tires on Mechanical, Thermal and Acoustic Properties of Plaster-Rubber Mortars. Materials and Design, 47, 633-642. http://dx.doi.org/10.1016/j.matdes.2012.12.063
 Yan, P. and You, Y. (1998) Studies on the Binder of Fly Ash-Fluorogypsum-Cement. Cement and Concrete Research, 28, 135-140. http://dx.doi.org/10.1016/S0008-8846(97)00247-0
 O’Rourke, O., McNally, C. and Richardson, M.G. (2009) Development of Calcium Sulfate-ggbs-Portland Cement Binders. Construction and Building Materials, 23, 340-346. http://dx.doi.org/10.1016/j.conbuildmat.2007.11.016
 Kovler, K. (1998) Setting and Hardening of Gypsum-Portland Cement-Silica Fume Blends, Part 2: Early Strength, DTA, XRD and SEM Observations. Cement and Concrete Research, 28, 523-531.
 Welch, F.C. (1923) Effects of Accelerators and Retarders on Calcined Gypsum. Journal of the American Ceramic Society, 6, 1197-1207. http://dx.doi.org/10.1111/j.1151-2916.1923.tb17689.x
 Sievert, T., Wolter, A. and Singh, N.B. (2005) Hydration of Anhydrite of Gypsum CaSO4 (II) in a Ball Mill. Cement and Concrete Research, 35, 623-630. http://dx.doi.org/10.1016/j.cemconres.2004.02.010
 Singh, N.B. (2005) The Activation Effect of K2SO4 on the Hydration of Gypsum Anhydrite CaSO4(II). Journal of the American Ceramic Society, 88, 196-201. http://dx.doi.org/10.1111/j.1551-2916.2004.00020.x
 Schiller, K.K. (1960) Skeleton Strength and Critical Porosity in Set Sulphate Plasters. British Journal of Applied Physics, 11, 338-342. http://dx.doi.org/10.1088/0508-3443/11/8/307
 Ryshkevitch, R. (1953) Compression Strength of Porous Sintered Alumina and Zirconia. Journal of the American Ceramic Society, 36, 65-68. http://dx.doi.org/10.1111/j.1151-2916.1953.tb12837.x
 Hasselman, D.P.H. (1969) Griffith Flaws and the Effect of Porosity on Tensile Strength of Brittle Ceramics. Journal of the American Ceramic Society, 52, 457-462. http://dx.doi.org/10.1111/j.1151-2916.1969.tb11982.x
 Colak, A. (2006) Physical and Mechanical Properties of Polymer-Plaster Composites. Materials Letters, 60, 1977-1982.
 Bijen, J. and Plas, C. (1992) Polymer Modified Glass Fiber Reinforced Gypsum. Materials and Structure, 25, 107-114.