ABB  Vol.2 No.2 , April 2011
Use of Image processing software in Hip Joint surgery
ABSTRACT
The scope of this project was to investigate the possibility of application of Image Processing Technique in the field of Shaft Alignment process. Misalignment of shaft using image processing software Visionbuilder was calculated. The further purpose of this project was to check whether the image processing technique can be used in bone transplant surgery. The model of the hip was used for the experimentation purpose. Image processing software Visionbuilder was used to match the profiles of the bone before implant and bone after implant.

Cite this paper
nullUddanwadiker, R. (2011) Use of Image processing software in Hip Joint surgery. Advances in Bioscience and Biotechnology, 2, 68-74. doi: 10.4236/abb.2011.22011.
References
[1]   Piotrowski, J. (1995) Shaft alignment handbook. CRC Press, Boca Raton.

[2]   Wowk, V. (2000) Specifying shaft alignment. Applied Technology Publications, 191, 659-675.

[3]   Idesawa, M. (1993) High precision image position sens-ing methods suitable for 3-D measurement. Optics and Lasers in Engineering, 10, 191-204. doi:10.1016/0143-8166(89)90037-7

[4]   Horbal, M.T. (2001) Precision bone alignment. United state patents US 5249581.

[5]   B?this, H., et al. (2003) Alignment in total knee arthro-plasty: A comparison of computer-assisted surgery with the conventional technique. Journal of Bone and Joint Surgery, 86-B, 682-687

 
 
Top