JWARP  Vol.6 No.3 , February 2014
Cellulosic Sorption Filter Materials with Surface Flocculation Activity—A Hopeful Anticipation of Water Purification
ABSTRACT

A filter media was developed comprising ionic activated cellulosic material with enormous sorption activity to ions-active dissolved and colloidal substances in aqueous systems evoking so-called surface flocculation and a filling material having a filter effect. The dilemma of the art of low sorption efficiency and high flow rate of filtrated aqueous dispersions without sacrificing its separation efficiency of fines has been solved by use of activated cellulosic material having multi-fold (roughly tenfold to hundredfold) sorption capacity for ions-active dissolved and submicron particulate contaminants compared to untreated cellulosic material.


Cite this paper
Milichovský, M. , Češek, B. , Filipi, M. and Gojný, J. (2014) Cellulosic Sorption Filter Materials with Surface Flocculation Activity—A Hopeful Anticipation of Water Purification. Journal of Water Resource and Protection, 6, 165-176. doi: 10.4236/jwarp.2014.63022.
References
[1]   M. Milichovsky, “Sorption Filter Materials as Challenge for Separation Technology,” Proceedings of the 15th International Congress of Chemical and Process Engineering CHISA, Fluid Flow and Multiphase Systems, 2002, pp. 130-131.

[2]   M. Milichovsky and M. Vodenicarová, “Influence of the Activated Pulp on the Wet-Web Chemistry of Paper Machines,” Cellulose Chemistry and Technology, Vol. 33, No. 5-6, 1999, pp. 503-511.

[3]   M. Milichovsky and B. Cesek, “Surface Flocculation as a New Tool for Controlling Adsorption Processe,” Adsorption Science & Technology, Vol. 20, No. 9, 2002, pp. 883-896. http://dx.doi.org/10.1260/02636170260555796

[4]   C. L. P. Dias, G. E. S. Valadao, A. C. Araujo, A. E. C. Peres and S. C. Amarante, “The Effect of Reagents on Ultrafine Iron Ore Vacuum Filtration,” Filtration + Separation, 2003, pp. 36-39.

[5]   F. S. Bourgeois and G. J. Lyman, “Morphological Analysis and Modeling of Fine Coal Filter Cake Microstructure,” Chemical Engineering Science, Vol. 52, No. 7, 1997, pp. 1151-1162.
http://dx.doi.org/10.1016/S0009-2509(96)00475-7

[6]   S. C. Amarante, A. C. Araujo, G. E. S. Valadao and A. E. C. Peres, “Cake Dewatering of Some Iron Ore Industrial Products,” Minerals and Metallurgical Processing, Vol. 19, 2002, pp. 161-164.

[7]   C. C. Mwaba, “Surfactants-Enhanced Dewatering of Graphite and Hematite Suspensions,” Minerals Engineering, Vol. 4, No. 1, 1991, pp. 49-62.
http://dx.doi.org/10.1016/0892-6875(91)90118-F

[8]   G. B. Tanny, D. K. Strong, W. G. Presswood and T. H. Meltzer, “Adsorptive Retention of Pseudomonas Diminuta by Membrane Filters,” Journal of the Parenteral Drug Association, Vol. 33, No. 1, 1979, pp. 40-51.

[9]   D. B. Pall, E. A. Kirnbauer and B. T. Allen, “Particulate Retention by Bacteria Retentive Membrane Filters,” Colloids and Surfaces, Vol. 1, No. 3, 1980, pp. 235-256.
http://dx.doi.org/10.1016/0166-6622(80)80015-1

[10]   A. Muresan, M. Vata, L. Tataru, R. Muresan and Cr. I. Simionescu, “Modification of the Tinctorial Capacity of Cellulosic Fibers through Cationization. I. Obtention of Cationized Cellulosic Fibers,” Cellulose Chemistry and Technology, Vol. 31, No. 1, 1997, pp. 17-23.

[11]   A. Muresan, M. Vata, L. Tataru, R. Muresan and Cr. I. Simionescu, “Modification of the Tinctorial Capacity of Cellulosic Fibers through Cationization,” Cellulose Chemistry and Technology, Vol. 31, No. 2, 1997, pp. 185-191.

[12]   M. Filipi and M. Milichovsky, “Adsorption Characteristic of Oxycellulose in a Competitive Environment with Other Substance,” Adsorption Science & Technology, Vol. 26, No. 7, 2008, pp. 545-561.

[13]   M. Foglarova, J. Prokop and M. Milichovsky, “Oxidized Cellulose: An Application in the Form of Sorption Filter Materials,” Journal of Applied Polymer Science, Vol. 112, No. 2, 2009, pp. 669-678.
http://dx.doi.org/10.1002/app.29465

[14]   T. Saito and A. Isogai, “Ion-Exchange Behaviour of Carboxylate Groups in Fibrous Oxidized Celluloses Prepared by TEMPO-Mediated System,” Carbohydrate Polymers, Vol. 61, No. 2, 2005, pp. 183-190.
http://dx.doi.org/10.1016/j.carbpol.2005.04.009

[15]   R. Saliba, H. Gauthier, R. Gauthier and M. Petit-Ramel, “The Use of Amidooximated Cellulose for the Removal of Metals Ions and Dyes from Waste Water,” Cellulose, Vol. 9, No. 1, 2002, pp. 183-191.
http://dx.doi.org/10.1023/A:1020117032406

[16]   R. Saliba, H. Gauthier and R. Gauthier, “Adsorption of Heavy Metal Ions on Virgin and Chemically-Modified Lignocellulosic Materials,” Adsorption Science & Technology, Vol. 23, No. 4, 2005, pp. 313-322.
http://dx.doi.org/10.1260/0263617054770039

[17]   A. M. A. Nada and N. A. El-Wakil, “Molecular Structure and Ion Exchange of Amidoximated Cellulosic Materials,” Journal of Applied Polymer Science,Vol. 102, No. 1, 2006, pp. 303-311. http://dx.doi.org/10.1002/app.23802

[18]   B. Cesek and M. Milichovsky, “Releasing of Soluble and Colloidal Substances in Pulp Slurries,” Cellulose Chemistry and Technology, Vol. 30, No. 3-4, 1996, pp. 297-306.

[19]   B. Cesek, M. Milichovsky and F. Potucek, “Kinetics of Vapour Diffusion and Condensation in Natural Porous Cellulosic Fibre Web,” ISRN Materials Science, Vol. 2011, 2011, Article ID: 794306.
http://dx.doi.org/10.5402/2011/794306

[20]   M. Vodenicarová, M. Milichovsky and B. Cesek, “Influence of Modified Pulp during Some Adsorption Processes,” Cellulose Chemistry and Technology, Vol. 35, No. 1-2, 2001, pp. 59-71.

[21]   M. El-Sakhawy and M. Milichovsky, “Oxycellulose Modification,” Polymer International, Vol. 49, No. 8, 2000, pp. 839-844.
http://dx.doi.org/10.1002/1097-0126(200008)49:8<839::AID-PI463>3.0.CO;2-T

[22]   M. El-Sakhawy, “Characterization of Modified Oxycellulose,” Journal of Thermal Analysis and Calorimetry, Vol. 63, No. 5, 2001, pp. 549-558.
http://dx.doi.org/10.1023/A:1010150122848

 
 
Top