Palm fiber (PF) reinforced acrylonitrile butadiene styrene (ABS) composite matrix was prepared by employing Injection Moulding Machine (IMM). Palm fiber was collected from ten different trees of different age group from Comilla region in Bangladesh. Three sets of samples were prepared for three different wt% (5%, 10% and 20%) of fiber contents. The mechanical (tensile strength, flexural stress, micro hardness, Leeb’s rebound hardness) and physical (bulk density and water absorption) properties were measured. The observed result reveals that the tensile strength (TS) and flexural stress (FS) were decreased with increasing fiber contents in the PF-ABS composites except 10% fiber content.
Cite this paper
B. Neher, M. Bhuiyan, H. Kabir, M. Qadir, M. Gafur and F. Ahmed, "Study of Mechanical and Physical Properties of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene Composite," Materials Sciences and Applications
, Vol. 5 No. 1, 2014, pp. 39-45. doi: 10.4236/msa.2014.51006
 A. Brent Strong, “History of Composite Materials-Opportunities and Necessities,” Brigham Young University, 2006. http://strong.groups.et.byu.net/pages/articles/articles/history.pdf
 T. Richardson, “Composite: A Design Guide,” Industrial Press, 1987.
 R. A. Khan, M. A. Khan, H. U. Zaman, N. Noor, T. Huq, A. Khan, K. Dey, B. Sarker, S. Saha, M. M. Rahman, M. Saha and M. A. Gafur, “Study on the Mechanical and Thermal Properties of Jute-Reinforced Methyl Acrylate Grafted PET Composites,” Polymer-Plastic Technology and Engineering, Vol. 49, 2010, pp. 373-380.
 R. Akter, R. Sultana, Md. Z. Alam, Md. R. Qadir, M. H. A. Begum and Md. A. Gafur, “Fabrication and Characterization of Woven Natural Fiber Reinforced Unsaturated Polyster Resin Composites,” International Journal of Engineering & Technology, Vol. 13 No. 2, 2013, pp. 122-128.
 S. Selke, “Biodegradation and Packageing,” Pira International Reviews: Surrey, UK, 1996.
 M. Avella, E. Bonadies, E. Martusecelli and R. Rimedio, “European Current Standardization for Plastic Packaging Recoverable through Composting and Biodegradation,” Polymer Testing, Vol. 20, No. 5, 2001, pp. 517-521. http://dx.doi.org/10.1016/S0142-9418(00)00068-4
 “Acrylonitrile Butadiene Styrene (ABS),” 2010. http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene
 N. N. B. Mohammad and A. Arsad, “Mechanical, Thermal and Morphological Study of Kenaf Fiber Reinforced rPET/ABS Composites,” Malaysian Polymer Journal, Vol. 8, No. 1, 2013, pp. 8-13. http://www.paspk.org/proceedings/44%20No.%202/7ce0b7abproc44-2-7.pdf
 ASTM Designation: D 3039/D 3039M-00, “Standard Test Method for Tensile Properties of Polymer Matrix Composites Materials”.
 ASTM Designation: D 790-00, “Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials”.
 F. J. Balta Calleja and S. Fakirov, “Microhardness of Polymer,” Cambridge University Press, UK, 2000.
 P. P. Budnikov, “The Technology of Ceramic and Refractories,” M. I. T Press, Cambridge, 1964.
 ASTM Designation: D 570-98, “Standard Test Methods for Water Absorption of Plastics”.
 M. Naznin, Md. Z. Abedin, M. A. Khan and Md. A. Gafur, “Influence of Acacia catechu Extracts and Urea and Gamma Irradiation on the Mechanical Properties of Starch/PVA-Based Material,” International Scholarly Research Network (ISRN), Polymer Science, Vol. 2012, 2012, Article ID: 348685. http://dx.doi.org/10.5402/2012/348685
 S.-H. Lee and S. Q. Wang, “Biodegradable Polymers/ Bamboo Fiber Biocomposite with Bio-Based Coupling Agent,” Composites: Part A, Vol. 37, 2006, pp. 80-91.
 I. Ahmad, D. R. Abu Bakar and S. N. Mokhilas, “Recyled PET for Rice Husk/Polyester Composites,” AJSTD, Vol. 22, No. 4 pp. 345-353. http://eprints.utp.edu.my/3294/
 S. Taj, M. A. Murawar and S. Khan, “Natural Fiber-Reinforced Polymer Composites,” Proceedings of the Pakistan Academy of Sciences, Vol. 44, No. 25, 2007, pp. 129-144.
 C. Tan, I. Ahmad and M. Heng, “Characterization of Polyester Composites from Recycled Polyethylene Terephthalate Reinforced with Empty Fruit Bunch Fibers,” Materials and Design, Vol. 32, No. 8-9, 2011, pp. 4493-4501. http://www.sciencedirect.com/science/article/pii/S0261306911002007
 A. H. Bhuiyan, M. F. Mina, S. Seema, M. M. Khan, M. J. Rahman and M. A. Gafur, “Structural, Elastic and Thermal Properties of Titanium Dioxide Filled Isostatic Polypropylene,” Journal of Polymer Research, Vol. 18, No. 5, 2011, pp. 1073-1079. http://dx.doi.org/10.1007/s10965-010-9509-y
 J. A. Khan, M. A. Khan, R. Islam and A. Gafur, “Mechanical, Thermal and Interfacial Properties of Jute Fabric-Reinforced Polypropylene Composites: Effect of Potassium Dichromate,” Material Science and Application, Vol. 1, No. 6, 2010, pp. 350-357. http://dx.doi.org/10.4236/msa.2010.16051
 R. M. Rowell and H. P. Stout, “Jute and Kenaf in Handbook of Fiber Chemistry,” Marcel Dekkar, Inc., New York, 1998.