JSEMAT  Vol.4 No.1 , January 2014
New Polysiloxane Surfaces Modified with ortho-, meta- or para-Nitrophenyl Receptors for Copper Adsorption
ABSTRACT


Porous SiO2 has been chemically modified with functional ortho-, meta- or para-nitrophenyl moieties using the heterogeneous route. This synthetic route involved the reaction of carbaldehyde derivatives with 3-aminopropyl trimethoxysilane prior to immobilization on the support. The new modified surfaces have been characterized by elemental analysis, FT-IR, 13C NMR of the solid state, nitrogen adsorption-desorption isotherm, BET surface area, B.J.H. Pore sizes, thermogravimetry curves (TGA) and scanning electron microscope (SEM). The new materials exhibit good chemical and thermal stability. These products were employed as a Cu(II) adsorbent from aqueous solutions at room temperature using the batch technique. Flame atomic absorption spectrometry was used to determine the Cu(II) concentration in the filtrate after the adsorption process. The results indicate that under the optimum conditions, the maximum adsorption value for Cu(II) was 20.0 mg Cu(II) g-1 modified silica, whereas the adsorption capacity of the unmodified silica was only 1.0 mg Cu(II) g-1 silica. On the basis of these results, it can be concluded that it is possible to modify chemically SiO2 with functional groups and use it as adsorbents for metals in aqueous media.



Cite this paper
S. Radi, N. Basbas, S. Tighadouini and M. Bacquet, "New Polysiloxane Surfaces Modified with ortho-, meta- or para-Nitrophenyl Receptors for Copper Adsorption," Journal of Surface Engineered Materials and Advanced Technology, Vol. 4 No. 1, 2014, pp. 21-28. doi: 10.4236/jsemat.2014.41004.
References
[1]   World Health Organization, “Guidelines for Drinking-Water Quality: Recommendations-Addendum,” Vol. 1, 3rd Edition, 2008.

[2]   K. K. Wong, C. K. Lee, K. S. Low and M. J. Haron, “Removal of Cu and Pb from Electroplating Wastewater Using Tartaric Acid Modified Rice Husk,” Process Biochemistry, Vol. 39, No. 4, 2003, pp. 437-445.
http://dx.doi.org/10.1016/S0032-9592(03)00094-3

[3]   K. G. Bhattacharyya and S. S. Gupta, “Adsorptive Accumulation of Cd(II), Co(II), Cu(II), Pb(II), and Ni(II) from Water on Montmorillonite: Influence of Acid Activation,” Journal of Colloid and Interface Science, Vol. 301, No. 2, 310, 2007, pp. 411-424.
http://dx.doi.org/10.1016/j.jcis.2007.01.080

[4]   S. Kubilay, R. Gürkan, A. Savran and T. Sahan, “Removal of Cu(II), Zn(II) and Co(II) Ions from Aqueous Solutions by Adsorption onto Natural Bentonite,” Adsorption, Vol. 13, No. 1, 2007, pp. 41-51.
http://dx.doi.org/10.1007/s10450-007-9003-y

[5]   D. P. Quintanilla, I. Hierro, M. Fajardo and I. Sierra, “Adsorption of Cadmium(II) from Aqueous Media onto a Mesoporous Silica Chemically Modified with 2-Mercaptopyrimidine,” Journal of Materials Chemistry, Vol. 16, 2006, pp. 1757-1764. http://dx.doi.org/10.1039/b518157g

[6]   G. Dubois, C. Reyé, R. J. P. Corriu and C. Chuit, “Organic-Inorganic Hybrid Materials. Preparation and Properties of Dibenzo-18-Crown-6 Ether-Bridged Polysilsesquioxanes,” Journal of Materials Chemistry, Vol. 10, 2000, pp. 1091-1098. http://dx.doi.org/10.1039/a909201c

[7]   D. P. Quintanilla, A. Sánchez, I. Hierro, M. Fajardo and I. Sierra, “Preparation, Characterization, and Zn2+ Adsorption Behavior of Chemically Modified MCM-41 with 5-Mercapto-1-Methyltetrazole,” Journal of Colloid and Interface Science, Vol. 313, No. 2, 2007, pp. 551-562.
http://dx.doi.org/10.1016/j.jcis.2007.04.063

[8]   Y. K. Lu and X. P. Yan, “An Imprinted Organic-Inorganic Hybrid Sorbent for Selective Separation of Cadmium from Aqueous Solution,” Analytical Chemistry, Vol. 76, No. 2, 2004, pp. 453-457.
http://dx.doi.org/10.1021/ac0347718

[9]   M. E. Mahmoud and E. M. Soliman, “Study of the Selective Extraction of Iron (III) by Silica-Immobilized 5-Formyl-3-Arylazo-Salicylic Acid Derivatives,” Talanta, Vol. 44, No. 6, 1997, pp. 1063-1071.
http://dx.doi.org/10.1016/S0039-9140(96)02194-7

[10]   A. Tong, Y. Akama and S. Tanaka, “Selective Preconcentration of Au(III), Pt(IV) and Pd(II) on Silica Gel Modified with γ-Aminopropyltriethoxysilane,” Analytica Chimica Acta, Vol. 230, 1990, pp. 179-181.
http://dx.doi.org/10.1016/S0003-2670(00)82778-6

[11]   E. F. S. Vieira, J. A. Simoni and C. Airoldi, “Interaction of Cations with SH-Modified Silica Gel: Thermochemical Study through Calorimetric Titration and Direct Extent of Reaction Determination,” Journal of Materials Chemistry, Vol. 7, 1997, pp. 2249-2252.
http://dx.doi.org/10.1039/a704286h

[12]   E. F. S. Vieira, A. R. Cestari, J. A. Simoni and C. Airoldi, “Use of Calorimetric Titration to Determine Thermochemical Data for Interaction of Cations with Mercapto-Modified Silica Gel,” Thermochimica Acta, Vol. 328, No. 1-2, 1999, pp. 247-252.
http://dx.doi.org/10.1016/S0040-6031(98)00649-2

[13]   W. Wasiak, “Specific Interactions of n-Donor Adsorbates with N-Benzoylthiourea-Copper (II) Complexes Chemically Bonded to Silica Supports,” Chromatographia, Vol. 41, No. 1-2, 1995, pp. 107-111.
http://dx.doi.org/10.1007/BF02274203

[14]   S. Radi, Y. Toubi, M. Bacquet, S. Degoutin and F. Cazier, “1-(Pyridin-2-yl) Imine Functionalized Silica Gel: Synthesis, Characterization, and Preliminary Use in Metal Ion Extraction,” Separation Science and Technology, Vol. 48, No. 9, 2013, pp. 1349.
http://dx.doi.org/10.1080/01496395.2012.726309

[15]   S. Radi, Y. Toubi and M. Bacquet, “Synthesis of Pyridin-3-Yl-Functionalized Silica as a Chelating Sorbent for Solid-Phase Adsorption of Hg(II), Pb(II), Zn(II), and Cd(II) from Water,” Research on Chemical Intermediates, Vol. 39, No. 8, 2013, pp. 3791-3802.
http://dx.doi.org/10.1007/s11164-012-0881-6

[16]   S. Radi, S. Tighadouini, Y. Toubi and M. Bacquet, “Polysiloxane Surface Modified with Bipyrazolic Tripodal Receptor for Quantitative Lead Adsorption,” Journal of Hazardous Materials, Vol. 185, No. 1, 2011, pp. 494-501. http://dx.doi.org/10.1016/j.jhazmat.2010.09.016

[17]   S. Radi, Y. Toubi, A. Attayibat and M. Bacquet, “New Polysiloxane-Chemically Immobilized C,C-Bipyrazolic Receptor for Heavy Metals Adsorption,” Journal of Applied Polymer Science, Vol. 121, No. 3, 2011, pp. 1393-1399. http://dx.doi.org/10.1002/app.33541

[18]   S. Radi and A. Attayibat, “Functionalized SiO2 With S-Donor Thiophene: Synthesis, Characterization, and Its Heavy Metals Adsorption,” Phosphorus, Sulfur, and Silicon and the Related Elements, Vol. 185, No. 10, 2010, pp. 2003-2013.
http://dx.doi.org/10.1080/10426500903440042

[19]   S. Radi, A. Attayibat, M. Bacquet, “Surface Modification of Porous Silica with Bi-thiophene Tripodal Ligand and Aplication to Adsorption of Toxic Metal Cations,” Phosphorus, Sulfur, and Silicon and the Related Elements, Vol. 185, No. 3, 2010, pp. 232-241.
http://dx.doi.org/10.1080/10426500902758469

[20]   S. Radi, A. Attayibat, A. Ramdani and M. Bacquet, “Synthesis and Characterization of Novel Porous SiO2 Material Functionalized with C,C-Pyridylpyrazole Receptor,” Journal of Applied Polymer Science, Vol. 117, No. 6, 2010, pp. 3345-3349.
http://dx.doi.org/10.1002/app.32021

[21]   S. Radi, A. Attayibat, A. Ramdani, Y. Lekchiri and M. Bacquet, “Synthesis and Characterization of a New Material Based on Porous Silica—Chemically Immobilized C,N-Pyridylpyrazole for Heavy Metals Adsorption,” Materials Chemistry and Physics, Vol. 111, No. 2-3, 2008, pp. 296-300.
http://dx.doi.org/10.1016/j.matchemphys.2008.04.011

[22]   S. Radi, A. Attayibat, A. Ramdani and M. Bacquet, “Synthesis and Characterization of Novel Silica Gel Supported N-Pyrazole Ligand for Selective Elimination of Hg(II),” European Polymer Journal, Vol. 44, No. 10, 2008, pp. 3163-3168.
http://dx.doi.org/10.1016/j.eurpolymj.2008.07.021

[23]   S. Radi, A. Ramdani, Y. Lekchiri, M. Morcellet, G. Crini, L. Janus and M. Bacquet, “Immobilization of Pyrazole Compounds on Silica Gels and Their Preliminary Use in Metal Ion Extraction,” New Journal of Chemistry, Vol. 27, No. 8, 2003, pp. 1224-1227.
http://dx.doi.org/10.1039/b301111a

[24]   S. Radi, A. Ramdani, Y. Lekchiri, M. Morcellet, G. Crini, J. Morcellet and L. Janus, “Preparation of Pyrazole Compounds for Attachment to Chelating Resins,” European Polymer Journal, Vol. 36, No. 9, 2000, pp. 1885-1892.
http://dx.doi.org/10.1016/S0014-3057(99)00274-8

[25]   S. Radi, A. Ramdani, Y. Lekchiri, M. Morcellet, G. Crini, L. Janus and B. Martel, “Extraction of Metal Ions from Water with Tetrapyrazolic Macrocycles Bound to Merrifield Resin and Silica Gel,” Journal of Applied Polymer Science, Vol. 78, No. 14, 2000, pp. 2495-2499.
http://dx.doi.org/10.1002/1097-4628(20001227)78:14<2495::AID-APP90>3.0.CO;2-S

[26]   R. Qu, M. Wang, C. Sun, Y. Zhang, C. Ji, H. Chen, Y. Meng and P. Yin, “Chemical Modification of Silica-Gel with Hydroxyl- or Amino-Terminated Polyamine for Adsorption of Au(III),” Applied Surface Science, Vol. 255, No. 5, 2008, pp. 3361-3370.
http://dx.doi.org/10.1016/j.apsusc.2008.09.055

[27]   S. Brunauer, P. H. Emmett and E. Teller, “Adsorption of Gases in Multimolecular Layers,” Journal of the American Chemical Society, Vol. 60, No. 2, 1938, pp. 309-319.
http://dx.doi.org/10.1021/ja01269a023

[28]   I.A. Banerjee, L. Yu and H. Matsui, “Cu Nanocrystal Growth on Peptide Nanotubes by Biomineralization: Size Control of Cu Nanocrystals by Tuning Peptide Conformation,” Proceedings of the National Academy of Sciences of the United States, Vol. 100, No. 25, 2003, pp. 14678-14682. http://dx.doi.org/10.1073/pnas.2433456100

[29]   P. Roumeliotis, A. A. Kurganov and V. A. Davankov, “Effect of the Hydrophobic Spacer in Bonded [Cu(l-Hydroxyprolyl)alkyl]+ Silicas on Retention and Enantioselectivity of α-Amino Acids in High-Performance Liquid Chromatography,” Journal of Chromatography A, Vol. 266, 1983, pp. 439-450.
http://dx.doi.org/10.1016/S0021-9673(01)90915-X

[30]   G. V. Kudryavtsev, D. V. Milchenko, S. Z. Bernadyuk, T. E. Vertinskaya and G. V. Lisichkin, “Synthesis and Properties of Phosphate Cation-Exchangers Based on Silica,” Theoretical and Experimental Chemistry, Vol. 23, No. 6, 1988, pp. 658-663.
http://dx.doi.org/10.1007/BF00534608

[31]   X. Li and F. Xue, “Removal of Cu(II) from Aqueous Solution by Adsorption onto Functionalized SBA-16 Mesoporous Silica,” Microporous and Mesoporous Materials, Vol. 116, No. 1-3, 2008, pp. 116-122.
http://dx.doi.org/10.1016/j.micromeso.2008.03.023

 
 
Top