Molecular dynamic (MD) simulations were carried out to predict the thermo-mechanical
properties of the cured epoxy network composed of diglycidyl ether bisphenol A (DGEBA)
epoxy resin and tetrahydrophthalic anhydride (THPA) curing agent and their
single-walled carbon nanotubes (SWCNT)
reinforced the epoxy matrix composites.
Different characters such as the density of the materials and mean square
displacements (MSDs) were calculated to estimate the glass transition
temperatures (Tgs) of of the materials. 365 K and 423 K of the
Tgs were obtained respectively, whereas the latter is much higher than the
former. The simulation results indicated that the incorporation of SWCNTs in
the epoxy matrix can significantly improve the Tg of the cured epoxy. The
approach presented in this study is ready to be applied more widely to a large
group of candidate polymers and nanofillers.
Cite this paper
Jiang, C. , Zhang, J. , Lin, S. and Jiang, D. (2014) Molecular Dynamic Simulation Study on Glass Transition Temperature of DGEBA-THPA/SWCNTs Composites. Journal of Materials Science and Chemical Engineering
, 26-30. doi: 10.4236/msce.2014.21005
 B. F. Abu-Sharkh, “Glass Transition Temperature of Poly(vinylchloride) from Molecular Dynamics Simulation: Explicit Atom Model Versus Rigid CH2 and CHCl Groups Model,” Computational and Theoretical Polymer Science, Vol. 354, No. 11, 2001, pp. 29-34.
 C. F. Wu and W. J. Xu, “Atomistic Molecular Modelling of Crosslinked Epoxy Resin,” Polymer, Vol. 47, 2006, pp. 6004-6009. http://dx.doi.org/10.1016/j.polymer.2006.06.025
 C. F. Wu and W. J. Xu, “Atomistic Molecular Simula- tions of Structure and Dynamics of Crosslinked Epoxy Resin,” Polymer, Vol. 48, 2007, pp. 5802-5812.
 H. B. Fan and Matthew M. F. Yuen, “Material Properties of the Cross-linked eEpoxy Resin Compound Predicted by Molecular Dynamics Simulation,” Polymer, Vol. 48, 2007, pp. 2174-2178.
 C. Y. Li and A. Strachan, “Molecular Simulations of Crosslinking Process of Thermosetting Polymers,” Polymer, Vol. 51, 2010, pp. 6058-6070.
 C. Y. Li and A. Strachan, “Molecular Dynamics Predictions of Thermal and Mechanical Properties of Thermoset Polymer EPON862/DETDA,” Polymer, Vol. 52, 2011, pp. 2920-2928. http://dx.doi.org/10.1016/j.polymer.2011.04.041
 G. M. Odegard and A. Bandyopadhyay, “Molecular Modeling of Crosslink Distribution in Epoxy Polymers,” Modelling and Simulation in Materials Science and Engineering, Vol. 20, 2012.
 A. Bandyopadhyay, “Molecular Modeling of EPON 862- DETDA Polymer,” Ph.D. Thesis, Michigan Technological University, Houghton, 2012.
 N. B. Shenogina, M. Tsige, S. S. Patnaik and S. M. Mukhopadhyay, “Molecular Modeling Approach to Prediction of Thermo-Mechanical Behavior of Thermoset Polymer Networks,” Macromolecules, Vol. 45, 2012, pp. 5307-5315. http://dx.doi.org/10.1021/ma3007587
 N. B. Shenogina, M. Tsige, S. S. Patnaik and S. M. Mukhopadhyay, “Molecular Modeling of Elastic Properties of Thermosetting Polymers Using a Dynamic Deformation Approach,” Polymer, Vol. 54, 2013, pp. 3370-3376.
 S. Iijima, “Helical Microtubules of Graphtic Carbon,” Nature, Vol. 354, No. 7, 1991, pp. 56-58.
 J.H. Gou, B. Minaie, B. Wang, Z. Y. Liang and C. Zhang, “Computational and Experimental Study of Interfacial Bonding of Single-walled Nanotube Reinforced Composites,” Computational Materials Science, Vol. 31, 2004, pp. 225-236. http://dx.doi.org/10.1016/j.commatsci.2004.03.002
 Z. Y. Liang, J. J. Gou, C. Zhang, B. Wang and L. Kramer, “Investigation of Molecular Interactions Between (10, 10) Single-walled Nanotube and Epon 862 Resin/DETDA Curing Agent Molecules,” Materials Science and Engineering A, Vol. 365, 2004, pp. 228-234.
 R. Mittal, M. Rastogi, N. Mahatele and A. Vidhyarthi, “Molecular Modeling for Calculation of Mechanical Properties of EPON862/Swcnts Composites,” IEEE, 2011.
 S. Chakraborty and S. Roy, “Structural, Dynamical, and Thermodynamical Properties of Carbon Nanotube Polycarbonate Composites: A Molecular Dynamics Study,” Journal of Physical Chemistry B, Vol. 116, 2012, pp. 3083-3091. http://dx.doi.org/10.1021/jp212220m