MSCE  Vol.2 No.2 , February 2014
Ceramic Tiles Obtained from Clay Mixtures with the Addition of Diverse Metallurgical Wastes
ABSTRACT

The generation of industrial residues is unavoidable, but these materials may be recovered, redirecting them toward new production processes, rather than allocating them to the stream of discards. The aim of this paper is to study the feasibility of utilization of metallurgical wastes as raw material for tiles in the ceramic industry, using the residual materials as aggregates in clay based ceramics. The residues used are: sludge and slag from several metallurgical processes, Ruthner dust and foundry sand. Samples were obtained from mixtures of clay and each waste in various percentages, which were then heat treated. The pieces obtained were characterized using several techniques, with the aim of determining the properties of these materials in relation to the commercial requirements. A high feasibility of reuse of most of these wastes as raw material in the production of ceramic bodies has been established.


Cite this paper
Quaranta, N. , Caligaris, M. , Unsen, M. , López, H. , Pelozo, G. , Pasquini, J. and Vieira, C. (2014) Ceramic Tiles Obtained from Clay Mixtures with the Addition of Diverse Metallurgical Wastes. Journal of Materials Science and Chemical Engineering, 2, 1-5. doi: 10.4236/msce.2014.22001.
References
[1]   Z. Ismail and E. Al-hashmi, “Reuse of Waste Iron as a Partial Replacement of Sand in Concrete,” Waste Management, Vol. 28, No. 11, 2008, pp. 2048-2053.
http://dx.doi.org/10.1016/j.wasman.2007.07.009

[2]   R. Siddique, G. Schutter and A. Noumowe, “Effect of UsedFoundry Sand on the Mechanical Properties of Concrete,” Construction and Building Materials, Vol. 23, No. 2, 2009, pp. 976-980.
http://dx.doi.org/10.1016/j.conbuildmat.2008.05.005

[3]   R. Magnani Andrade, S. Cava, S. Nascimento Silva, L. Bastos Soledade, C. Rossi, E. Leite, C. Paskocimas, J. Varela and E. Longo, “Foundry Sand Recycling in the Troughs of Blast Furnaces: A Technical Note,” Journal of Materials Processing Technology, Vol. 159, No. 1, 2005, pp. 125-134.
http://dx.doi.org/10.1016/j.jmatprotec.2003.10.021

[4]   F. Raupp-Pereira, M. Ribeiro, A. Segadaes and J. Labrincha, “Extrusion and Property Characterisation of WasteBased Ceramic Formulations,” Journal of the European Ceramic Society, Vol. 27, No. 5, 2007, pp. 2333-2340.
http://dx.doi.org/10.1016/j.jeurceramsoc.2006.07.015

[5]   B. Das, S. Prakash, P. S. R. Reddy and V. N. Misra, “An Overview of Utilization of Slag and Sludge from Steel Industries,” Conservation and Recycling, Vol. 50, No. 1, 2007, pp. 40-57.
http://dx.doi.org/10.1016/j.resconrec.2006.05.008

[6]   J. Waligora, D. Bulteel, P. Degrugilliers, D. Damidot, J. L. Potdevin and M. Measson, “Chemical and Mineralogical Characterization of LD Converter Steel Slag: A MultiAnalytical Techniques Approach,” Materials Characterization, Vol. 61, No. 1, 2010, pp. 39-48.
http://dx.doi.org/10.1016/j.matchar.2009.10.004

[7]   Y. L. Chen, J. E. Chang, P. H. Shih, M. S. Ko, Y. K. Chang and L. C. Chiang, “Reusing Pretreated Desulfurization Slag to Improve Clinkerization and Clinker Grindability for Energy Conservation in Cement Manufacture,” Journal of Environmental Management, Vol. 91, No. 9, 2010, pp. 1892-1897.
http://dx.doi.org/10.1016/j.jenvman.2010.04.006

[8]   E. Furlani, G. Tonello and S. Maschio, “Recycling of Steel Slag and Glass Cullet from Energy Saving Lamps by Fast Firing Production of Ceramics,” Waste Management, Vol. 30, No. 8-9, 2010, pp. 1714-1719.
http://dx.doi.org/10.1016/j.wasman.2010.03.030

[9]   W. F. Kladnig, “New Development of Acid Regeneration in Steel Pickling Plants,” Journal of Iron and Steel Research, Vol. 15, No. 4, 2008, pp. 1-6.
http://dx.doi.org/10.1016/S1006-706X(08)60134-X

[10]   A. López-Delgado, C. Pérez and F. A. López, “The Influence of Carbon Content of Blast Furnace Sludges and Coke on the Adsorption of Lead Ions from Aqueous Solution,” Carbon, Vol. 34, No. 3, 1996, pp. 423-426.
http://dx.doi.org/10.1016/0008-6223(96)87611-1

[11]   A. López-Delgado, C. Pérez and F. A. López, “Sorption of Heavy Metals on Blast Furnace Sludge,” Water Research, Vol. 32, No. 4, 1998, pp. 989-996.
http://dx.doi.org/10.1016/S0043-1354(97)00304-7

[12]   S. Li, J. Cui, Q. Zhang, J. Fu, J. Lian and C. Li, “Performance of Blast Furnace Dust Clay Sodium Silicate Ceramic Particles (BCSCP) for Brewery Wastewater Treatment in a Biological Aerated Filter,” Desalination, Vol. 258, No. 1-3, 2010, pp. 12-18.
http://dx.doi.org/10.1016/j.desal.2010.04.006

[13]   L. P. Davila, S. H. Risbud and J. F. Shakelford, “Quartz and Silicas. Chapter 5,” In: J. F. Shackelford and R. H. Doremus, Eds., Ceramic and Glass Materials, Springer, 2008, p. 73.

[14]   C. F. Vieira, P. Andrade, G. Maciel, F. Vernilli and S. Monteiro, “Incorporation of Fine Steel Sludge Waste into Red Ceramic,” Material Science and Engineering A, Vol. 427, No. 1-2, 2006, pp. 142-147.
http://dx.doi.org/10.1016/j.msea.2006.04.040

 
 
Top