MNSMS  Vol.4 No.1 , January 2014
Finite Element Analysis of the Groove Pressing of Aluminum Alloy
ABSTRACT
In this paper, the finite element method was applied to analyze the deformation behavior of Al-1%Mg alloy during constrained groove pressing (CGP). Deformation inhomogeneity was studied in term of plastic strain distribution during deformation. It was found that after first pressing and flattening steps, the plastic strain is inhomogeneous but second pressing and flattening improve deformation distribution considerably. Also the regions between flat and inclined parts of sample receive less shear strain and consequently after four passes the deformation distribution is still inhomogeneous and doesn’t improve remarkably with more deformation steps.

Cite this paper
M. Ghazani and A. Vajd, "Finite Element Analysis of the Groove Pressing of Aluminum Alloy," Modeling and Numerical Simulation of Material Science, Vol. 4 No. 1, 2014, pp. 32-36. doi: 10.4236/mnsms.2014.41006.
References
[1]   Y. T. Zhu and T. G. Langdon, “The Fundamentals of Nanostructured Materials Processed by Severe Plastic Deformation,” JOM, Vol. 56, No. 10, 2004, pp. 57-63.

[2]   R. Z. Valiev, R. K. Islamgaliev and I. V. Alexandrov, “Bulk Nanostructured Materials from Severe Plastic Deformation,” Progress in Materials Science, Vol. 45, No. 2, 2000, pp. 103-189. http://dx.doi.org/10.1016/S0079-6425(99)00007-9

[3]   R. Pippan, F. Wetscher, M. Hafok, A. Vorhauer and I. Sabirov, “The Limits of Refinement by Severe Plastic Deformation,” Advanced Engineering Materials, Vol. 8, No. 11, 2006, pp. 1046-1056.

[4]   R. Z. Valiev, Y. Estrin, Z. Horita, T. G. Langdon, Mi. J. Zehetbauer and Y. T. Zhu, “Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation,” JOM, Vol. 58, No. 4, 2006, pp. 33-39. http://dx.doi.org/10.1007/s11837-006-0213-7

[5]   T. C. Lowe and R. Z. Valiev, “The Use of Severe Plastic Deformation Techniques in Grain Refinement,” JOM, Vol. 56, No. 10, 2004, pp. 64-77. http://dx.doi.org/10.1007/s11837-004-0295-z

[6]   A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski and A. Yanagida, “Severe Plastic Deformation (SPD) Processes for Metals,” CIRP Annals—Manufacturing Technology, Vol. 57, No. 2, 2008, pp. 716-735.

[7]   L. Olejnik and A. Rosochowski, “Bulletin of the Polish Academy of Sciences, Methods of Fabricating Metals for Nano-Technology,” Technical Science, Vol. 53, No. 4, 2005, pp. 413-423.

[8]   R. Z. Valiev and T. G. Langdon, “Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement,” Progress in Materials Science, Vol. 51, No. 7, 2006, pp. 881-981. http://dx.doi.org/10.1016/j.pmatsci.2006.02.003

[9]   Z. Yang and U. Welzel, “Microstructure-Microhardness Relation of Nanostructured Ni Produced by High-Pressure Torsion,” Materials Letters, Vol. 59, No. 27, 2005, pp. 3406-3409. http://dx.doi.org/10.1016/j.matlet.2005.05.077

[10]   Y. Chen, Q. Wang, J. Lin, L. Zhang and Ch. Zhai, “Fabrication of Bulk UFG Magnesium Alloys by Cyclic Extrusion Compression,” Journal of Materials Science, Vol. 42, No. 17, 2007, pp. 7601-7603. http://dx.doi.org/10.1007/s10853-007-1889-y

[11]   Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, “Novel Ultra-High Straining Process for Bulk Materials Development of the Accumulative Roll-Bonding (ARB) Process,” Acta Materialia, Vol. 47, No. 2, 1999, pp. 579-583. http://dx.doi.org/10.1016/S1359-6454(98)00365-6

[12]   J. W. Lee and J. J. Park, “Numerical and Experimental Investigations of Constrained Groove Pressing and Rolling for Grain Refinement,” Journal of Materials Processing Technology, Vol. 130-131, 2002, pp. 208-213. http://dx.doi.org/10.1016/S0924-0136(02)00722-7

[13]   A. Krishnaiah, U. Chakkingal and P. Venugopal, “Production of Ultrafine Grain Sizes in Aluminium Sheets by Severe Plastic Deformation Using the Technique of Groove Pressing,” Scripta Materialia, Vol. 52, No. 12, 2005, pp. 1229-1233. http://dx.doi.org/10.1016/j.scriptamat.2005.03.001

[14]   A. Krishnaiah, U. Chakkingal and P. Venugopal, “Applicability of the Groove Pressing Technique for Grain Refinement in Commercial Purity Copper,” Materials Science and Engineering A, Vol. 410-411, 2005, pp. 337-340. http://dx.doi.org/10.1016/j.msea.2005.08.101

[15]   J. J. Park, N. J. Park, “Influence of Orthogonal Shear on Texture and R Value in Aluminum Sheet,” Journal of Materials Processing Technology, Vol. 169, No. 2, 2005, pp. 299-307. http://dx.doi.org/10.1016/j.jmatprotec.2004.12.015

[16]   Y. T. Zhu, H. Jiang, J. Y. Huang and T. C. Lowe, “A New Route to Bulk Nanostructured Metals,” Metallurgical and Materials Transactions A, Vol. 32, No. 6, 2001, pp. 1559-1562. http://dx.doi.org/10.1007/s11661-001-0245-0

[17]   K. Peng, L. Su, L. L. Shaw and K. W. Qian, “Grain Refinement and Crack Prevention in Constrained Groove Pressing of Two-Phase Cu-Zn Alloys,” Scripta Materialia, Vol. 56, No. 11, 2007, pp. 987-990. http://dx.doi.org/10.1016/j.scriptamat.2007.01.043

[18]   G. R. Johnson and W. H. Cook, “Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures,” Engineering Fracture Mechanics, Vol. 21, No. 1, 1985, pp. 31-48. http://dx.doi.org/10.1016/0013-7944(85)90052-9

[19]   Q. X. Pei, B. H. Hu, C. Lu and Y. Y. Wang, “A Finite Element Study of the Temperature Rise during Equal Channel Angular Pressing,” Scripta Materialia, Vol. 49, No. 4, 2003, pp. 303-308. http://dx.doi.org/10.1016/S1359-6462(03)00284-7

[20]   V. P. Basavaraj, U. Chakkingal and T. S. Prasanna Kumar, “Study of Channel Angle Influence on Material Flow and Strain Inhomogeneity in Equal Channel Angular Pressing Using 3D Finite Element Simulation,” Journal of Materials Processing Technology, Vol. 209, No. 1, 2009, pp. 89-95.

[21]   D. H. Shin, J. J. Park, Y. S. Kim and K. T. Park, “Constrained Groove Pressing and Its Application to Grain Refinement of Aluminum,” Materials Science and Engineering: A, Vol. 328, No. 1-2, 2002, pp. 98-103. http://dx.doi.org/10.1016/S0921-5093(01)01665-3

 
 
Top