ACES  Vol.4 No.1 , January 2014
Formation of Platinum (Pt) Nanocluster Coatings on K-OMS-2 Manganese Oxide Membranes by Reactive Spray Deposition Technique (RSDT) for Extended Stability during CO Oxidation
Abstract: Nanocluster formation of a metallic platinum (Pt) coating, on manganese oxide inorganic membranes impregnated with multiwall carbon nanotubes (K-OMS-2/MWCNTs), applied by reactive spray deposition technology (RSDT) is discussed. RSDT applies thin films of Pt nanoclusters on the substrate; the thickness of the film can be easily controlled. The K-OMS-2/MWCNTs fibers were enclosed by the thin film of Pt. X-ray diffraction (XRD), scanning electron microscopy/X-ray energy dispersive spectroscopy (SEM/XEDS), focus ion beam/scanning electron microscopy (FIB/SEM), transmission electron microscopy (TEM), and X-ray 3D micro-tomography (MicroXCT) which have been used to characterize the resultant Pt/K-OMS-2/MWCNTs membrane. The non-destructive characterization technique (MicroXCT) resolves the Pt layer on the upper layer of the composite membrane and also shows that the membrane is composed of sheets superimposed into stacks. The nanostructured coating on the composite membrane material has been evaluated for carbon monoxide (CO) oxidation. The functionalized Pt/K-OMS-2/MWCNTs membranes show excellent conversion (100%) of CO to CO2 at a lower temperature 200℃ compared to the uncoated K-OMS-2/MWCNTs. Moreover, the Pt/K-OMS-2/MWCNTs membranes show outstanding stability, of more than 4 days, for CO oxidation at 200℃.
Cite this paper: Garces, H. , Roller, J. , King’ondu, C. , Dharmarathna, S. , Ristau, R. , Jain, R. , Maric, R. and Suib, S. (2014) Formation of Platinum (Pt) Nanocluster Coatings on K-OMS-2 Manganese Oxide Membranes by Reactive Spray Deposition Technique (RSDT) for Extended Stability during CO Oxidation. Advances in Chemical Engineering and Science, 4, 23-35. doi: 10.4236/aces.2014.41004.

[1]   C. K. King’ondu, N. Opembe, C. Chen, K. Ngala, H. Huang, A. Iyer, H. F. Garces and S. L. Suib, “Manganese Oxide Octahedral Molecular Sieves (OMS-2) Multiple Framework Substitutions: A New Route to OMS-2 Particle Size and Morphology Control,” Advanced Functional Materials, Vol. 21, No. 2, 2011, pp. 312-323.

[2]   A. Iyer, J. Del-Pilar, C. K. King’ondu, E. Kissel, H. F. Garces, H. Huang, A. M. El-Sawy, P. K. Dutta and S. L. Suib, “Water Oxidation Catalysis Using Amorphous Manganese Oxides, Octahedral Molecular Sieves (OMS-2), and Octahedral Layered (OL-1) Manganese Oxide Structures,” Journal of Physical Chemistry C, Vol. 116, No. 10, 2012, pp. 6474-6483.

[3]   S. Dharmarathna, C. K. King’ondu, W. Pedrick, L. Pahalagedara and S. L. Suib, “Direct Sonochemical Synthesis of Manganese Octahedral Molecular Sieve (OMS-2) Nanomaterials Using Cosolvent Systems, Their Characterization, and Catalytic Applications,” Chemistry of Materials, Vol. 24, No. 4, 2012, pp. 705-712.

[4]   M. Abecassis-Wolfovich, R. Jothiramalingam, M. V. Landau, M. Herskowitz, B. Viswanathan and T. K. Varadarajan, “Cerium Incorporated Ordered Manganese Oxide OMS-2 Materials: Improved Catalysts for Wet Oxidation of Phenol Compounds,” Applied Catalysis B: Environmental, Vol. 59, 2005, pp. 91-98.

[5]   B. Hu, C. Chen, S. J. Frueh, L. Jin, R. Joesten and S. L. Suib, “Removal of Aqueous Phenol by Adsorption and Oxidation with Doped Hydrophobic Cryptomelane-Type Manganese Oxide (K-OMS-2) Nanofibers,” Journal of Physical Chemistry C, Vol. 114, 2010, pp. 9835-9844.

[6]   X. Li, B. Hu, S. L. Suib, Y. Lei and B. Li, “Electricity Generation in Continuous Flow Microbial Fuel Cells (MFCs) with Manganese Doxide (MnO2) Cathodes,” Biochemical Engineering Journal, Vol. 54, No. 1, 2011, pp. 10-15.

[7]   S. L. Suib, “Porous Manganese Oxide Octahedral Molecular Sieves and Octahedral Layered Materials,” Accounts of Chemical Research, Vol. 41, No. 4, 2008, pp. 479-487.

[8]   J. Yuan, K. Laubernds, J. Villegas, S. Gomez and S. L. Suib, “Spontaneous Formation of Inorganic Paper-Like Materials,” Advanced Materials, Vol. 16, No. 19, 2004, pp. 1729-1732.

[9]   J. A. Rogers, M. G. Lagally and R. G. Nuzzo, “Synthesis, Assembly and Applications of Semiconductor Nanomembranes,” Nature, Vol. 477, No. 7362, 2011, pp. 45-53.

[10]   S. I. A. Razak, S. H. S. Zein and A. L. Ahmad, “MnO2Filled Multiwalled Carbon Nanotube/Polyaniline Nanocomposites: Properties and Its Percolation Threshold,” Nano: Brief Reports and Reviews, Vol. 6, No. 1, 2011, pp. 81-91.

[11]   J. Roller, R. Neagu, F. Orfino and R. Maric, “Supported and Unsupported Platinum Catalysys Prepared by a OneStep Dry Deposition Method and Their Oxygen Reduction Reactivity in Acidic Media,” Journal of Materials Science, Vol. 47, No. 11, 2012, pp. 4604-4611.

[12]   R. Maric, J. Roller and R. Neagu, “Flame-Based Technologies and Reactive Spray Deposition Technology for Low-Temperature Solid Oxide Fuel Cells: Technical and Economic Aspects,” Journal of Thermal Spray Technology, Vol. 20, No. 4, 2011, pp. 696-718.

[13]   R. Maric, K. Furusaki, D. Nishijima and R. Neagu, “Thin Film Low Temperature Solid Oxide Fuel Cell (LTSOFC) by Reactive Spray Deposition Technology (RSDT),” ECS Transactions, Vol. 35, No. 1, 2011, pp. 473-481.

[14]   R. Maric, R. Neagu, Y. Zhang-Steenwinkel, F. Van Berkel and B. Rietveld, “Reactive Spray Deposition Technology—An One-Step Deposition Technique for Solid Oxide Fuel Cell Barrier Layers,” Journal of Power Sources, Vol. 195, No. 24, 2010, pp. 8198-8201.

[15]   R. Nédélec, R. Neagu, S. Uhlenbruck, R. Maric, D. Sebold, H. Buchkremer and D. Stöver, “Gas Phase Deposition of Diffusion Barriers for Metal Substrates in Solid Oxide Fuel Celss,” Surface & Coatings Technology, Vol. 205, No. 16, 2011, pp. 3999-4004.

[16]   J. Roller, “Low Platinum Electrodes for Proton Exchange Fuels Cells Manufactures by Reactive Spray Deposition Technology,” MASc Thesis, University of British Columbia, Vancouver, 2009.

[17]   A. Camenzind, W. R. Caseri and S. E. Pratsinis, “FlameMade Nanoparticles for Nanocomposites,” Nano Today, Vol. 5, No. 1, 2010, pp. 48-65.

[18]   T. T. Kodas and M. J. Hampden-Smith, “Aerosol Processing of Materials,” Wiley-VCH, New York, 1999.

[19]   P. Roth, “Particle Synthesis in Flames,” Proceedings of the Combustion Institute, Vol. 31, No. 2, 2007, pp. 1773-1788.

[20]   R. Strobel and S. E. Pratsinis, “Flame Aerosol Synthesis of Smart Nanostructured Materials,” Journal of Materials Chemistry, Vol. 17, No. 45, 2007, pp. 4743-4756.

[21]   M. S. Wooldridge, “Gas-Phase Combustion Synthesis of Particles,” Progress in Energy and Combustion Science, Vol. 24, No. 1, 1998, pp. 63-87.

[22]   K. Wegner and S. E. Pratsinis, “Nozzle-Quenching Process for Controlled Flame Synthesis of Titania Nanoparticles,” AIChE Journal, Vol. 49, No. 7, 2003, pp. 1667-1675.

[23]   L. Stobinski, B. Lesiak, L. Kover, J. Toth, S. Biniak, G. Trykowski and J. Judek, “Multiwall Carbon Nanotubes Purification and Oxidation by Nitric Acid Studied by the FTIR and Electron Spectroscopy Methods,” Journal of Alloys and Compounds, Vol. 501, No. 1, 2010, pp. 77-84.

[24]   CrystalMaker Software Ltd., “CrystalMaker: A Crystal and Molecular Structure Program for Mac and Windows,” Oxford, Version 2.1.5, 1994-2009.

[25]   R. N. DeGuzman, Y. Shen, E. J. Neth, S. L. Suib, C. O’Young, S. Levine and J. M. Newsam, “Synthesis and Characterization of Octahedral Molecular Sieves (OMS-2) Having the Hollandite Structure,” Chemistry of Materials, Vol. 6, No. 6, 1994, pp. 815-821.

[26]   E. Maire, N. Gimenez, V. Sauvant-Maynot and H. Sauterean, “X-Ray Tomography and Three-Dimensional Image Analysis of Epoxy-Glass Syntactic Foams,” Philosophical Transactions of the Royal Society A, Vol. 364, No. 1838, 2006, pp. 69-88.

[27]   Q. Zhang, P. D. Lee, R. Singh, G. Wu and T. C. Lindley, “Micro-CT Characterization of Structural Features and Deformation Behavior of Fly Ash/Aluminum Syntactic Foam,” Acta Materialia, Vol. 57, No. 10, 2009, pp. 3003-3011.

[28]   J. Kastner, B. Harrer, G. Requena and O. Brunke, “A Comparative Study of High Resolution Cone Beam XRay Tomography and Synchrotron Tomography Applied to Feand Al-Alloys,” NDT&E International, Vol. 43, No. 7, 2010, pp. 599-605.

[29]   L. Salvo, M. Suery, A. Marmottant, N. Limodin and D. Bernard, “3D Imaging in Material Science: Application of X-Ray Tomography,” Comptes Rendus Physique, Vol. 11, No. 9, 2010, pp. 641-649.

[30]   R. Moreno-Atanasio, R. A. Williams and X. Jia, “Combining X-Ray Microtomography with Computer Simulation for Analysis of Granular and Porous Materials,” Particuology, Vol. 8, No. 6, 2010, pp. 81-99.

[31]   J. Kastner, B. Harrer and H. P. Degischer, “High Resolution Cone Beam X-Ray Computed Tomography of 3DMicrostructures of Cast Al-Alloys,” Materials Characterization, Vol. 62, No. 1, 2011, pp. 99-107.

[32]   C. Kwak, T. Park and D. J. Suh, “Preferential Oxidation of Carbon Monoxide in Hydrogen-Rich Gas over Platinum-Cobalt-Alumina Aerogel Catalysts,” Chemical Engineering Science, Vol. 60, No. 5, 2005, pp. 1211-1217.

[33]   D. J. Suh, C. Kwak, J. Kim, S. M. Kwon and T. Park, “Removal of Carbon Monoxide from Hydrogen Rich Fuels by Selective Low-Temperature Oxidation over Base Metal Added Platinum Catalysts,” Journal of Power Sources, Vol. 142, No. 1, 2005, pp. 70-74.

[34]   H. Igarashi, H. Uchida, M. Suzuki, Y. Sasaki and M. Watanabe, “Removal of Carbon Monoxide from Hydrogen-Rich Fuels by Selective Oxidation over Platinum Catalysts Supported on Zeolite,” Applied Catalysis A: General, Vol. 159, 1997, pp. 159-169.

[35]   K. Teruuchi, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto, “Amorphous Nickel-Base Alloy Catalysts for Oxidation of Carbon Monoxide by Oxygen and Nitrogen Monoxide,” Applied Catalysis, Vol. 76, No. 1, 1991, pp. 79-93.

[36]   E. M. C. Alayon, J. Singh, M. Nachtegaal, M. Harfouche and J. A. Van Bokhoven, “On Highly Active Partially Oxidized Platinum in Carbon Monoxide Oxidation over Supported Platinum Catalysts,” Journal of Catalysis, Vol. 263, No. 2, 2009, pp. 228-238.

[37]   G. Gürdag and T. Hahn, “The Oxidation of Carbon Monoxide on Platinum-Supported Binary Oxide Catalysts,” Applied Catalysis A, Vol. 192, No. 1, 2000, pp. 51-55.

[38]   D. Gavril, N. A. Katsanos and G. Karaiskakis, “Gas Chromatographic Kinetic Study of Carbon Monoxide Oxidation over Platinum-Rhodium Alloy Catalysts,” Journal of Chromatography A, Vol. 852, No. 2, 1999, pp. 507-523.

[39]   M. Stancheva, S. Manev, D. Lazarov and M. Mitov, “Catalytic Activity of Nickel Based Amorphous Alloys for Oxidation of Hydrogen and Carbon Monoxide,” Applied Catalysis A: General, Vol. 135, No. 1, 1996, pp. L19-L24.

[40]   K. Wu, Y. Tung, Y. Chen and Y. Chen, “Catalytic Oxidation of Carbon Monoxide over Gold/Iron Hydroxide Catalysts at Ambient Conditions,” Applied Catalysis B: Environmental, Vol. 53, No. 2, 2004, pp. 111-116.

[41]   P. V. Gosavi and R. B. Biniwale, “Catalytic Preferential Oxidation of Carbon Monoxide over Platinum Supported on Lanthanum Ferrite-Ceria Catalysts for Cleaning Hydrogen,” Journal of Power Sources, Vol. 222, 2013, pp. 1-9.