SGRE  Vol.4 No.8 , November 2013
Performance of Corrugated Wick in “V” Type Solar Still
ABSTRACT
This works reports performance of corrugated wick in a “V” type solar still. The still was tested in two configurations: plane wick integrated with drip system and corrugated wick integrated with drip system. A mathematical modeling has been proposed to validate experimental results. The experiment was performed in Tamilnadu, India climatic conditions (11° North 77° East). Experimental investigations on productivity and internal heat transfer are analyzed. The results indicate that the mean standard deviations between theoretical and experimental values are less than 7% (temperature of rippled wick), 3% (temperature of glass in rippled system), 6% (temperature of flat wick) and 3% (temperature of glass in flat system) an average for the working hours of the day. The distillate yield produced was 2800 ml/m2/day by plane wick and 2200 ml/m2/day by corrugated wick.

Cite this paper
Suneesh, P. , Jayaprakash, R. , Namshad, T. and Kumar, S. (2013) Performance of Corrugated Wick in “V” Type Solar Still. Smart Grid and Renewable Energy, 4, 483-487. doi: 10.4236/sgre.2013.48055.
References
[1]   J. A. Duffie and W. A. Beckaman, “Solar Engineering of Thermal Processes,” Madison, 1991.

[2]   V. Velmurugan, M. Gopalakrishnan, R. Raghu and K. Srithar, “Single Basin Solar Still with Fin for Enhancing Productivity,” Energy Conversion and Management, Vol. 49, No. 10, 2000, pp. 2602-2608.
http://dx.doi.org/10.1016/j.enconman.2008.05.010

[3]   N. A. Minasian and A. A. Al-Karaghouli, “An Improved Solar Still: The Wick Basin Type,” Energy Conversion and Management, Vol. 36, No. 3, 1995, pp. 213-217.
http://dx.doi.org/10.1016/0196-8904(94)00053-3

[4]   M. K. Phadatare and S. K. Verma, “Influence of Water Depth an Internal Heat and Mass Transfer in a Plastic Solar Still,” Journal of Desalination, Vol. 217, No. 1-3, 2007, pp. 267-275.
http://dx.doi.org/10.1016/j.desal.2007.03.006

[5]   K. Kalidasa Murugavel and K. Srithar, “Performance Study on Basin Type Double Slop Solar Still with Different Wick Materials and Minimum Mass of Water,” Renewable Energy, Vol. 36, No. 2, 2011, pp. 612-620.
http://dx.doi.org/10.1016/j.renene.2010.08.009

[6]   H. M. Yeh and L. C. Chen, “The Effect of Climatic, Design and Operational Parameters on the Performance of Wick-Type Solar Distillers,” Energy Conversion and Management, Vol. 26, No. 2, 1986, pp. 175-180.

[7]   S. Talbert, J. Eibling and G. Lof, “Manual on Solae Distillation of Saline Water,” US Department of the Interior, OSW, R&D, Report No. 546, 1970.

[8]   K. Tanaka, A. Yamashita and K. Watanabe, “Solar World Forum,” Vol. 2, Pergamon Press, Oxford, 1982.

[9]   R. V. Dunkle, “Solar Water Distillation, the Roof Type Still and a Multiple Effect Diffusion Still,” International Developments in Heat Transfer, ASME, Proceeding of International Heat Transfer, Part V, University of Colorado, 1961, p. 895.

[10]   T. Siaka and M. Pierre, “A Numerical Model and Experimental Investigation for a Solar Still in Climatic Conditions in Abidjan (COTE DTOIRE),” Renewable Energy, Vol. 11, 1997, pp. 319-330.
http://dx.doi.org/10.1016/S0960-1481(96)00131-0

[11]   J. Duffie and W. Beckman, “Solar Engineering of Thermal Processes,” 2nd Edition, John Wiley and Sons, New York, 1991.

[12]   J. H. Watmuff, W. W. S. Charters and D. Proctor, “Solar and Wind Induced External Coefficients Solar Collectors,” Revue Internationale Heliotechnique, Vol. 2, 1977, p. 56.

[13]   V. B. Sharma and S. C. Mullick, “Estimation of HeatTransfer Coefficients, the Upward Heat Flow, and Evaporation in a Solar Still,” ASME Journal of Solar Energy Engineering, Vol. 113, 1991, pp. 36-41.
http://dx.doi.org/10.1115/1.2929949

 
 
Top