“Thermacore k-Core Data Sheet,” 2013. http://www.thermacore.com/products/kcore.aspx
 A. Part, R. Linton and D. Agonafer, “Coarse and Detailed CFD Modeling of a Finned Heat Sink,” IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 18, No. 3, 1995, pp. 517-520.
 J. Yang, W. Wang and L. Huazhi, “2-Dimensional CFD Simulation and Correlation Development for Optimization of Fin Heatsinks in Electronic Cooling,” Journal of Thermal Science, Vol. 10, No. 4, 2001, pp. 363-371.
 V. Eveloy, J. Lohan, and P. Rodgers, “A Benchmark Study of Computational Fluid Dynamics Predictive Accuracy for Component-Printed Circuit Board Heat Transfer,” IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 3, 2000, pp. 568-578.
 I. Tari and Y. Fidan-Seza, “CFD Analyses of a Notebook Computer Thermal Management System and a Proposed Passive Cooling Alternative,” IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 2, 2010, pp. 443-452.
 T. Y. Lee and M. Mahalingam, “Application of a CFD Tool for System Level Thermal Simulation,” IEEE Transactions on Components, Packaging and Manufacturing Technology—Part A, Vol. 17, No. 4, 1994, pp. 564-572.
 T. Y. Lee, B. Chambers and M. Mahalingam, “Application of a CFD Technology to Electronic Thermal Management,” IEEE Transactions on Components, Packaging and Manufacturing Technology—Part B,” Vol. 18, No. 3, 1995, pp. 511-520. http://dx.doi.org/10.1109/96.404110
 J. Choi, Y. Kim, A. Sivasubramaniam, J. Srebric, Q. Wang and J. Lee, “A CFD Based Tool for Studying Temperature in Rack Mounted Servers, IEEE Transactions on Computers,” Vol. 57, No. 8, 2008, pp. 1129-1142. http://dx.doi.org/10.1109/TC.2008.52
 A. Almodi, A. Thompson, N. Kapur, J. Summers, H. Thompson G. and Hannah, “Computational Fluid Dynamics Investigation of Liquid Rack Cooling in Data Centres,” Applied Energy, Vol. 89, No. 1, 2012, pp. 150-155. http://dx.doi.org/10.1016/j.apenergy.2011.02.003
 J. Rambo and Y. Joshi, “Modeling of Data Center Airflow and Heat Transfer: State of the Art and Future Trends,” Distributed Parallel Databases, Vol. 21, No. , 2007, pp. 193-225. http://dx.doi.org/10.1007/s10619-006-7007-3
 R. Boukhanouf and A. Haddad, “A CFD Analysis of an Electronics Cooling Enclosure for Application in Telecommunication Systems,” Applied Thermal Engineering, Vol. 30, No. 16, 2010, pp. 2426-2434. http://dx.doi.org/10.1016/j.applthermaleng.2010.06.012
 Z. Khatir, J. Paton, H. Thompson, N. Kapur, V. Toropov, M. Lawres and D. Kirk, “Computational Fluid Dynamics (CFD) Investigation of Air Flow and Temperature Distribution in a Small Scale Bread-Baking Oven,” Applied Energy, Vol. 89, No. 1, 2012, pp. 89-96. http://dx.doi.org/10.1016/j.apenergy.2011.02.002
 D. B. Flowers and K. R. Anderson, “Numerical Simulation of Conduction Heat Transfer in a System of Slowly Rotating Concentric Shells Separated by Small Annular Gap Distances,” Numerical Heat Transfer Part A, Vol. 46, No. 9, 2004, pp. 1-17.
 “Graftech Data Sheet,” 2013. www.graftech.com
 “Chotherm Data Sheet,” 2013. www.chomerics.com
 M. A. Ismail, M. Z. Abdullah and M. A. Mujeebu, “A CFD Based Analysis on the Effect of Free Stream Cooling on the Performance of Micro Processor Heat Sinks,” International Communications in Heat and Mass Transfer, Vol. 35, No. 6, 2008, pp. 771-778. http://dx.doi.org/10.1016/j.icheatmasstransfer.2008.02.012