OJMetal  Vol.3 No.4 , December 2013
Analysis of the Behavior of Local Cooking Utensils in Tap Water, Salt Tap Water and Vegetable Oil According to the Temperature
ABSTRACT
In Senegal the aluminum scrap are mainly recycled kitchen utensils [1]. The craftsmanship poses the problem of the quality of finished products [1] especially when we know they are used for everyday cooking. Given that none of these alloys should not be used to make cooking utensils if we refer to the EN 601 standard in July 2004, which refers to this regard [1], this study aims at analyzing behavior of these alloys reconstructed in three settings (tap water, vegetable oil and salt water more than 3 grams per liter), chosen for their importance in Senegalese cuisine. Significant loss of mate- rial was observed mainly by intergranular corrosion. It would be interesting that additional studies be conducted to ex- amine the impact of the daily use of these alloys on the health of Senegalese.

Cite this paper
M. Ndiaye, S. Bec, B. Coquillet and I. Cissé, "Analysis of the Behavior of Local Cooking Utensils in Tap Water, Salt Tap Water and Vegetable Oil According to the Temperature," Open Journal of Metal, Vol. 3 No. 4, 2013, pp. 80-85. doi: 10.4236/ojmetal.2013.34012.
References
[1]   M. B. Ndiaye, S. Bec, B. Coquillet and I. K. Cissé “Analysis of Cooking Utensils Containing Aluminum Scrap in Senegal,” Research Journal of Applied Sciences Engineering and Technology, Vol. 4, No. 4, 2012, pp. 367-370.

[2]   D. Landolt, “Corrosion et Chimie des Surfaces des Métaux,” Polytechnic University Presses and Romandes, Lausanne, 2003.

[3]   W. Huppatz, “Well-Tried Methods of Corrosion Investigation and Corrosion Testing for Aluminum Materials and Aluminum Components,” Materials and Corrosion-Werkstoffe und Korrosion, Vol. 53, No. 9, pp. 680-691. http://dx.doi.org/10.1002/1521-4176(200209)53:9<680::AID-MACO680>3.0.CO;2-X

[4]   J. R. Davis, “Corrosion of Aluminum and Aluminum Alloys (#06787G),” ASM International, Almere, 1999.

[5]   G. Charlot, “ Analyse Qualitative rapide des Cations et des Anions,” Dunod, Paris, 1963.

[6]   C. Vargel, “Le Comportement de l’Aluminium et de ses Alliages,” Dunod, Paris, 1979.

[7]   Decree No. 2001-1220 of 20-12-2001 Relating to the Regulation of safe Drinking Water (Application on 24 December 2003).

[8]   M. Ergun, M. Balbasi and A. Tosun, “Correlation Model of Aluminium Pitting Potential Variation with Environmental Conditions,” British Corrosion Journal, Vol. 32, No. 2, 1997, pp. 117-121. http://dx.doi.org/10.1179/000705997798114986

[9]   R. P. Wei, C. M. Liao and M. Gao, “A Transmission Electron Microscopy Study of Constituent-Particle-Induced Corrosion in 7075-T5 and 2024-T3 Aluminium Alloys,” Metallurgical and Material Transactions A, Vol. 29, 1998, pp. 1153-1160.

[10]   P. S. Pao, C. R. Feng, J. J. Gill and K. K. Sankara, “Corrosion-Fatigue Crack Growth in Friction Stir Welded Al 7050,” Scripta Materialia, Vol. 45, No. 5, 2001, pp. 605- 612. http://dx.doi.org/10.1016/S1359-6462(01)01070-3

[11]   L. E. Fratila-Apachitei, I. Apachitei and J. Duszczyk, “Characterization of Cast Al-Si(Cu) Alloys by Scanning Kelvin Probe Force Microscopy,” Electrochimica Acta, Vol. 51, No. 26, 2006, pp. 5892-5896.

[12]   F. Andreatta, H. Terryn and J. H. W. De Wit, “Corrosion Behaviour of Different Tempers of AA7075 Aluminium Alloy,” Electrochimica Acta, Vol. 49, No. 17, 2004, pp. 2851-2862. http://dx.doi.org/10.1016/j.electacta.2004.01.046

[13]   V. Guillaumin and G. Mankowski, “Localized Corrosion of 6056 T6 Aluminium Alloy in Chloride Media,” Corrosion Science, Vol. 42, No. 1, 2000, pp. 109-125. http://dx.doi.org/10.1016/S0010-938X(99)00053-0

 
 
Top