OJMetal  Vol.3 No.4 , December 2013
The Comparative Study of the Temperature Distribution of Fiber Laser with Different Pump Schemes
ABSTRACT
Based on the structure of the long fiber laser (YDCFLs) with different pump schemes using high pump power, the nonlinear coupled and heat dissipation equations are solved numerically. Using the finite-difference method, we have determined the temperature distribution along the radial and axial directions of the fiber laser (YDCFLs) for the forward pump schemes of 200 W with reflection Rp2, backward pump schemes of 200 W with reflection Rp1 and for bidirectional pump scheme of 100 W each side. The results are: the temperature distribution for bidirectional pump mode is more even than that for forward pump with reflection Rp2 and than that for backward pump with reflection Rp1. The results show that the maximum temperature difference between different schemes is 57.51°C, and when the air-clad width decreases, the temperature in the core regions also decreases and does not affect to the cladding radius regions. We summarize that the temperature in the core and in cladding radius regions decreases when the outer radius cladding increases.

Cite this paper
M. Abouricha, A. Boulezhar and N. Habiballah, "The Comparative Study of the Temperature Distribution of Fiber Laser with Different Pump Schemes," Open Journal of Metal, Vol. 3 No. 4, 2013, pp. 64-71. doi: 10.4236/ojmetal.2013.34010.
References
[1]   J. Limpert, A. Liem, H. Zellmer and A. Tunnerman, “500 W Continuous-Wave Fiber Laser with Excellent Beam Quality,” Electronics Letters, Vol. 39, No. 8, 2003, pp. 645-647. http://dx.doi.org/10.1049/el:20030447

[2]   Y. Wang and C.-Q. Xu, “Modeling and Optimization of Q-Switched Double-Clad Fiber Laser,” Applied Optics, Vol. 45, No. 9, 2006, pp. 2058-2071.

[3]   R. Paschotta, J. Nilsson, A. C. Tropper and D. C. Hanna, “Ytterbium-Doped Fiber Amplifiers,” IEEE Journal of Quantum Electronics, Vol. 33, No. 7, 1997, pp. 1049-1056. http://dx.doi.org/10.1109/3.594865

[4]   Y. Jeong, J. K. Sahu, D. N. Payne, et al., “Ytterbium- Doped Large-Core Fiber with 1.36 KW of Continuous- Wave Output Power,” Optics Express, Vol. 12, No. 25, 2004, pp. 6088-6092. http://dx.doi.org/10.1364/OPEX.12.006088

[5]   D. Gapont, “Quasi-Single-Mode Fiber Laser Nears 2 kW Output with High-Quality Beam,” Laser Focus World, Vol. 41, No. 6, 2005, pp. 9-11.

[6]   S. Baek, D. B. S. Soh, Y. Jeong, J. K. Sahu, J. Nilsson and B. Lee, “Acladding-Pumped Fiber Laser with Pump- Reflecting Bragg Grating,” IEEE Photonics Technology Letters, Vol. 16, No. 2, 2004, pp. 407-409. http://dx.doi.org/10.1109/LPT.2003.823135

[7]   I. Kelson and A. Hardy, “Srongly Pumped Fiber Lasers,” IEEE Journal of Quantum Electronics, Vol. 34, No. 9, 1998, pp. 1570-1577. http://dx.doi.org/10.1109/3.709573

[8]   L. Shang, “Comparative Study of the Output Characteristics of Ytterbium-Doped Double-Clad Fiber Lasers with Different Pump Schemes,” Optik, Vol. 122, No. 21, 2011, pp. 1899-1902.

[9]   J. F. Li, “Theoretical Analysis of the Heat Dissipation Mechanism in High Power Photonic Crystal Fiber Laser,” Optik, Vol. 121, No. 13, 2010, pp. 1243-1250. http://dx.doi.org/10.1016/j.ijleo.2009.01.015

[10]   W. M. Rohsenow, J. P. Hartnett and Y. I. Cho, “Handbook of Hear Transfer,” McGraw-Hill, New York, 1998.

[11]   B. David, “Therma, Stress, and Thermo-Optic Effects in High Average Power Double-Clad Silica Fiber Lasers,” IEEE Journal of Quantum Electronics, Vol. 37, No. 2, 2001, pp. 207-217.

[12]   J. F. Li, “Theoretical Analysis and Heat Dissipation of Mid-Infrared Chalcogenide Fiber Raman Laser,” Optics Communications, Vol. 284, No. 5, 2011, pp. 1278-1283. http://dx.doi.org/10.1016/j.optcom.2010.10.062

[13]   P.-X. Li and C. Zhu, “Theorecal and Experimental Investigation of Thermal Effects in a High Power Yb3+-Doped Double-Clad Fiber Laser,” Optics and Laser Technology, Vol. 40, No. 2, 2008, pp. 360-364. http://dx.doi.org/10.1016/j.optlastec.2007.06.011

[14]   J. P. Holman, “Heat Transfer,” 8th Edition, McGraw-Hill, New York, 1997.

 
 
Top