JAMP  Vol.1 No.6 , November 2013
Analysis of Fretting Fatigue Crack Initiation in a Riveted Two Aluminum Specimen
Abstract: Based on the existing experiment results, the fretting fatigue contact geometry of a riveted two aluminum specimen was studied using the finite element method. The contact stress fields of the inner and outer contact edges on the two specimen’s up and down surface under different contact friction coefficient and the fatigue loads were analyzed, the influences of the contact friction coefficient and remote stress on crack initiation were discussed. The results were in well agreement with the observations of the existing experiments, that is, the crack initiated places of the first aluminum specimen change from the area of 900 to 450, and the crack initiated places of the second aluminum specimen change from the area of 900 to 1350 with the increase of the friction coefficient and the remote stress.
Cite this paper: Li, H. , Guo, R. , Cheng, H. and Wei, Y. (2013) Analysis of Fretting Fatigue Crack Initiation in a Riveted Two Aluminum Specimen. Journal of Applied Mathematics and Physics, 1, 48-53. doi: 10.4236/jamp.2013.16010.

[1]   H. Zhao and Z. R. Zhou, “Application and Progress of Numerical Methods in Analysis of Fretting Fatigue,” Tribology, Vol. 20, No. 4, 2000, pp. 317-320. (in Chinese)

[2]   J. Liu, D. X. Liu and Y. Y. Liu, “Finite Element Analysis for Fretting Contacting Stresses,” Joumal of Mechanical Strength, Vol. 27, No. 4, 2005, pp. 504-509.

[3]   M. A. McCarthy, C. T. McCarthy, V. P. Lawlor and W. F. Stanley, “Three-Dimensional Finite Element Analysis of Single-Bolt, Single-Lap Composite Bolted Joints: Part 1: Model Development and Validation,” Composite Structure, Vol. 71, 2005, pp. 140-158.

[4]   Y. Mutoh and J. Q. Xu, “Fracture Mechanics Approach to Fretting Fatigue and Problems to Be Solved,” Tribology International, Vol. 36, 2003, pp. 99-107.

[5]   M. X. Shen, J. F. Peng, J. F. Zheng, C. Song, J. L. Mo and M. H. Zhu, “Study and Development of Fretting Fatigue,” Materials Engineering, 2010, p. 12.

[6]   M. S. Yang, Y. L. Chen and Y. Q. Bi, “Study of Fretting Fatigue Influencing Factors Based on Predictable Model of Fatigue Life,” Journal of Naval Aeronautical and Astronautical University, Vol. 27, No. 1, 2012.

[7]   D. R. Swalla and R. W. Neu, “Influence of Coefficient of Friction on Fretting Fatigue Crack Nucleation Prediction,” Tribology International, Vol. 34, 2001, pp. 493-503.

[8]   O. Jin and S. Mall, “Effects of Slip on Fretting Behavior: Experiments and Analyses,” Wear, Vol. 256, 2004, pp. 671-684.

[9]   D. Ning, Y. B. He and W. D. Yao, “Study and Analysis on Fretting Wear and Fretting Fatigue for Irradiation Surveillance Capsules in NPP,” Nuclear Power Engineering and Technology, Vol. 3, 2007, pp. 6-11.

[10]   H. H. Chen and P. Qi, “Patran/Marc Training Course and Instance,” Science Press, Beijing, 2004.