JPEE  Vol.1 No.7 , December 2013
Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts
Abstract: In order to prevent unwanted excited vibrations and to secure better machining precision in large size heavy duty machine tools dynamic stiffness is one of the most desirable and critical properties. In the past decades, many researches on machine tool stiffness test and evaluation methodology have been made. However any methodology for a Pin Turning Device (PTD), which is a special kind of turning lathe for machining big size crankshaft pins, is rarely found among them. This study proposes a test and evaluation process of stiffness of a PTD by measuring frequency response function at the tool center point (TCP). For conformance proving for the proposed methodology, stiffness of a PTD obtained by the proposed method with impact hammer test (IHT) has been compared with that determined by FEM.
Cite this paper: Choi, Y. , Ha, G. , Kim, D. and An, H. (2013) Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts. Journal of Power and Energy Engineering, 1, 14-19. doi: 10.4236/jpee.2013.17003.

[1]   L. Uriarte, M. Zatarain, D. Axinte, J. Yague Fabra, S. Ihlenfeldt, J. Eguia and A. Olarra, “Machine Tools for Large Parts,” CIRP Annals—Manufacturing Technology, Vol. 62, 2013, pp. 731-750.

[2]   R. Umbach, “Problems of Stiffness and Accuracy of Large Size Machine Tools,” Proceedings of 6th International MTDR, 1965, pp. 99-122.

[3]   M. Weck, “Handbook of Machine Tools—Automation of Controls,” Wiley, 1984.

[4]   M. Weck and K. Teipel, (Translated into Korean by J. M. Lee and K. J. Kim), “Dynamic Characteristics of Machine Tool—Their Measurement and Evaluation Technology,” Dae Gwang Mun Hwa Sa Publishing Co., 1985.

[5]   D. T.Y. Huang and J.J. Lee, “On Obtaining Machine Tool Stiffness by CAE Techniques,” International Journal of Machine Tools & Manufacture, Vol. 41, 2001, pp. 1149-1163.

[6]   M. Arentoft and T. Wanheim, “A New Approach to Determine Press Stiffness,” CIRP Annals—Manufacturing Technology, Vol. 54, No. 1, 2005, pp. 265-268.

[7]   M. Arsuaga, R. Lobato, A. Rodrigue and L. N. Lopez de Lacalle, “Experimental Methodology for Discretization and Characterization of the Rigidities for Large Components Manufacturing Machine,” Procedia Engineering, Vol. 63, 2013, pp. 623-631.

[8]   S. H. Jang, J. H. Oh, H. S. An and Y. H. Choi, “Multi-Objective Structural Optimization of a Pin Turning Device by Using Hybrid Optimization Algorithm,” Proceedings of International Conference of Manufacturing Technology Engineers, Seoul, Korea, 2012. p. 73.

[9]   S. H. Jang, Y. H. Choi, S. T. Kim, H. S. An, H. B. Choi and J. S. Hong, “Development of Core Technologies of Multi-Tasking Machine Tools for Machining Highly Precision Large Parts,” Journal of the KSPE, Vol. 29, No. 2, 2012, pp. 129-138.

[10]   H. S. An, Y. J. Cho, Y. H. Choi and D. W. Lee, “Development of a Multi-Tasking Machine Tool for Machining Large Scale Marine Engine Crankshafts and Its Design Technologies,” Journal of the KSPE, Vol. 29, No. 2, 2012, pp. 139-146.