Back
 JAMP  Vol.1 No.6 , November 2013
Apply of Explicit Finite Element in Seismic Ground Motion Computation
Abstract: In this paper, we will use the explicit finite element to compute ground motion due to Tangshan earthquake. The explicit finite-element method uses one integration point and an hourglass control scheme. We implement the coarse-grain method in a structured finite-element mesh straightforwardly. At the same time, we also apply the coarse-grain method to a widely used, slightly unstructured finite-element mesh, where unstructured finite elements are only used in the vertical velocity transition zones. By the finite-element methods, we can compute the ground velocity with some distance to the seismogenic fault in Tangshan earthquake. Through the computation, we can find the main character of ground motion for the strike slip earthquake events and the high frequency vibration motion of ground motion.
Cite this paper: Bai, Y. and Xu, X. (2013) Apply of Explicit Finite Element in Seismic Ground Motion Computation. Journal of Applied Mathematics and Physics, 1, 11-14. doi: 10.4236/jamp.2013.16003.
References

[1]   J. Lysmer and L. A. Drake, “A Finite Element Method for Seismology,” In: B. Alder, S. Fernbach and B. A. Bolt, Eds., Methods in Computational Physics, Vol. 11, Academic Press, New York, 1972.

[2]   V. Pereyra, E. Richardson and S. E. Zarantonello, “Large Scale Calculations of 3D Elastic Wave Propagation in a Complex Geology,” Proceedings Supercomputing, 1992, pp. 301-309.

[3]   E. Kim, J. Bielak and O. Ghattas, “Large-scale North-Ridge Earthquake Simulation Using Octree-Based Multi-reslution Mesh Method,” Proceed-ings of the 16th ASCE Engineering Mechanics Conference, Seattle, July 2003.

[4]   S. M. Day, “Three-Dimensional Simulation of Spontaneous Rupture: The Effect of Nonuniform Prestress,” Bulletin of the Seismological Society of America, Vol. 72, 1982, pp. 1881-1902.

[5]   D. D. Oglesby, R. J. Archuleta and S. B. Nielsen, “Earthquakes on Dipping Faults: The Effects of Broken Symmetry,” Science, Vol. 280, No. 5366, 1998, pp. 1055-1059. http://dx.doi.org/10.1126/science.280.5366.1055

[6]   T. J. R. Hughes, “Finite Element Method—Linear Static and Dynamic Finite Element Analysis,” Prentice-Hall, Englewood Cliffs, 1987.

[7]   G. L. Gourdreau and J. O. Hallquist, “Recent Developments in Large Scale Finite Elements Lagrangian Hydro-code Technology,” Computer Methods in Applied Mechanics and Engineering, Vol. 33, No. 1-3, 1982, pp. 725-757. http://dx.doi.org/10.1016/0045-7825(82)90129-3

[8]   T. Belytschko, J. S. Ong, W. K. Liu and J. M. Kennedy, “Hourglass Control in Linear and Nonlinear Problems,” Computer Methods in Applied Mechanics and Engineering, Vol. 43, No. 3, 1984, pp. 251-276. http://dx.doi.org/10.1016/0045-7825(84)90067-7

[9]   D. Kosloff and G. A. Frazier, “Treatment of Hourglass Patterns in Low Order Finite Element Codes,” International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 2, No. 1, 1978, pp. 57-72. http://dx.doi.org/10.1002/nag.1610020105

[10]   S. Ma and L. Peng, “Modeling of the Perfectly Matched Layer Absorbing Boundaries and Intrinsic Attenuation in Explicit Finite-Element Methods,” Bulletin of the Seis-mological Society of America, Vol. 96, No. 5, 2006, pp. 1779-1794. http://dx.doi.org/10.1785/0120050219

 
 
Top