The original purpose of FGMs was the development of super resistant materials for propulsion systems. In the present work, numerical and experimental techniques are used to investigate the dynamic behavior of generally laminated composited beams. In the numerical analysis, the laminated beam is modeled using the commercial finite element software ANSYS. In the experimental study the core and face materials of sandwich beam specimens are nylon/epoxy FGMs and pure epoxy laminates respectively. The dynamic behavior of the sandwich composite beam specimens with different fiber orientation was carried out using two dynamic excitation techniques, harmonic using harmonic response and impulse using hammer. The specimens were prepared in the following configurations, different orientation angles, different layers, and different thickness. The results reveal that the natural frequencies of sandwich beam were affected directly by the face materials. The natural frequency decreases with increasing fiber orientations of the nylon/epoxy face laminates. Increasing the thickness increases natural frequencies. This study concluded that it is useful for the designers to select the fiber orientation angle to shift the natural frequencies as desired or to control the vibration level.
Cite this paper
S. Rabboh, N. Bondok, T. Mahmoud and H. El Kholy, "The Effect of Functionally Graded Materials into the Sandwich Beam Dynamic Performance," Materials Sciences and Applications
, Vol. 4 No. 11, 2013, pp. 751-760. doi: 10.4236/msa.2013.411095
 L. Qi, V. P. Iu and K. P. Kou, “Three-Dimensional Vibration Analysis of Functionally Graded Rectangular Plates,” Journal of Sound and Vibration, Vol. 311, 2006, pp. 362-381.
 M. Koizumi, “Concept of FGM,” Ceramic Transactions, Vol. 34, 1993, pp. 3-10.
 K. Hajime and K. Manabu, “Damping Properties of Thermoplastic-Elastomeric Interleaved Carbon Fiber-Reinforced Epoxy Composites,” Composites Science and Technology, Vol. 64, No. 16, 2004, pp. 2517-2523. http://dx.doi.org/10.1016/j.compscitech.2004.05.006
 T. Khondker, M. Fukui, A. Inoda and H. Nakai, “Fabrication and Mechanical Properties of Aramid/Nylon Plain Knitted Composites,” Composites: Part A, Vol. 35, No. 10, 2004, pp. 1195-1205. http://dx.doi.org/10.1016/j.compositesa.2004.03.004
 Y. Meng-Kao and H. Tsung-Han, “Dynamic Properties of Sandwich Beams with MWNT/Polymer Nanocomposites as Core Materials,” Composites Science and Technology, Vol. 68, No. 14, 2008, pp. 2930-2936. http://dx.doi.org/10.1016/j.compscitech.2007.10.010
 S. M. R. Khalili, N. Nemati, K. Malekzadeh and A. R. Damanpack, “Free Vibration Analysis of Sandwich Beams Using Improved Dynamic Stiffness Method”, Composite Structures, Vol. 92, No. 2, 2010, pp. 387-394. http://dx.doi.org/10.1016/j.compstruct.2009.08.020
 A. Galal and F. Mohammed, “Effects of Orientation and Laminate Stacking Sequence on Out-of-Plane and InPlane Bending Natural Frequencies of Laminated Composite Beams,” Composite Structures, Vol. 82, 2009, pp. 146-156.
 M. Simsek and T. Kocaturk, “Free Vibration Analysis of Beams by Using a Third-Order Shear Deformation Theory,” Vol. 32, 2007, pp. 167-179.
 X. Xian-Kun and S. Hui-Shen, “Vibration of Post-Buckled Sandwich Plates with FGM Face Sheets in a Thermal Environment,” Journal of Sound and Vibration, Vol. 314, No. 1-2, 2008, pp. 254-274. http://dx.doi.org/10.1016/j.jsv.2008.01.019
 M. A. Salam and N. E.Bondok, “Free Vibration Characteristic for Different Configurations of Sandwich Beams,” Journal of Sound and Vibration, Vol. 10, 2009, pp. 1-14.
 M. A. Salam and N. E.Bondok, “Free Vibration Characteristics for Different Configurations of Sandwich Beams,” International Journal of Mechanical & Mechatronics, Vol. 10, 2010, pp. 41-54.