MSA  Vol.4 No.11 , November 2013
Synthesis and Dielectric Properties of (0.80 - x)Pb(Cr1/5,Ni1/5,Sb3/5)O3-xPbTiO3-0.20PbZrO3 Ferroelectric Ceramics
ABSTRACT

Perovskite PZT variants were synthesized from stoichiometric oxide ratios of Pb, Zr, Ti, Cr, Ni and Sb. The oxide powders were mixed mechanically and calcinated, and then sintered to form the desired perovskite phase. The detailed structural and ferroelectric properties were carried out for sintered specimens. The results of X-ray diffraction showed that all the ceramics specimens have a perovskite phase. The multi-component ceramic system consists of the (0.80 - x)Pb(Cr1/5,Ni1/5,Sb3/5)O3-xPbTiO3-0.20PbZrO3 (PZT-CNS), with 0.30 ≤ x ≤ 0.42, and the ternary system near the rhombohedral/tetragonal morphotropic phase boundary(MPB) was investigated by X-ray diffraction and dielectric properties. In the present system, the MPB that coexists with the tetragonal and rhombohedral phases is a narrow composition region of x = 0.38 - 0.42. The scanning Electron Microscopy (SEM) showed an increase of the mean grain size when the sintering temperature was increased. A sintered density of 92.93% of the theoretical density was obtained for Ti = 42% after sintering at 1180°C. Ceramics sintered at 1180°C with Ti = 42% achieve excellent dielectric properties, which are as follows εr = 4262.48, and Tc = 340°C.


Cite this paper
A. Meklid, A. Boutarfaia, Z. Necira, H. Menasra and M. Abba, "Synthesis and Dielectric Properties of (0.80 - x)Pb(Cr1/5,Ni1/5,Sb3/5)O3-xPbTiO3-0.20PbZrO3 Ferroelectric Ceramics," Materials Sciences and Applications, Vol. 4 No. 11, 2013, pp. 746-750. doi: 10.4236/msa.2013.411094.
References
[1]   Z. He, J. Ma and R. Z. Hang, “Investigation on the Microstructure and Ferroelectric Properties of Porous PZT Ceramics,” Ceramics International, Vol. 30, No. 7, 2004, pp. 1353-1356.
http://dx.doi.org/10.1016/j.ceramint.2003.12.108

[2]   R. E. Newnham and A. Amin, “Smart Systems: Microphones, Fish Farming, and Beyond-Smart Materials, Acting as Both Sensors and Actuators, Can Mimic Biological Behavior,” Chemtech, Vol. 29, No. 12, 1999, pp. 38-47.

[3]   K. Uchino, “Materials Issues in Design and Performance of Piezoelectric Actuators: An Overview,” Acta Materialia, Vol. 46, No. 11, 1998, pp. 3745-3753.
http://dx.doi.org/10.1016/S1359-6454(98)00102-5

[4]   R. Ranjan, R. Kumar, B. Behera and R. N. P. Choudhary, “Effect of Sm on Structural, Dielectric and Conductivity Properties of PZT Ceramics,” Materials Chemistry and Physics, Vol. 115, No. 1, 2009, pp. 473-477.
http://dx.doi.org/10.1016/j.matchemphys.2009.01.017

[5]   S. T. Lau, K. W. Kwok, H. L. W. Chan and C. L. Choy, “Piezoelectric Composite Hydrophone Array,” Sensors and Actuators A: Physical, Vol. 96, No. 1 ,2002, pp. 14-20.
http://dx.doi.org/10.1016/S0924-4247(01)00757-9

[6]   T. Zeng, X. L. Dong, S. T. Chen and H. Yang, “Processing and Piezoelectric Properties of Porous PZT Ceramics,” Ceramics International, Vol. 33, No. 3, 2007, pp. 395-399. http://dx.doi.org/10.1016/j.ceramint.2005.09.022

[7]   S. S. Chandratreya, R. M. Fulrath and J. A. Y. Pask, “Reaction Mechanisms in the Formation of PZT Solid Solutions,” Journal American Ceramic Society, Vol. 64, No. 7, 1981, pp. 422-425.
http://dx.doi.org/10.1111/j.1151-2916.1981.tb09883.x

[8]   S. Y. Cheng, S. L. Fu, C. C. Wei and G. M. Ke, “The Properties Low-Temperature Fixed Piezoelectric Ceramics,” Journal of Materials Science, Vol. 21, No. 2, 1986, pp. 571-576. http://dx.doi.org/10.1007/BF01145525

[9]   H. G. Lee, J. H. Choi and E. S. Kim, ” Low-Temperature Sintering and Electrical Properties of (1-x)Pb(Zr0.5Ti0.5)O3-xPb(Cu0.33Nb0.67)O3 Ceramics,” Journal of Electroceramics, Vol. 17, No. 2-4, 2006, pp. 1035-1040.
http://dx.doi.org/10.1007/s10832-006-0384-1

[10]   R. Mazumder, A. Sen and H. S. Maiti, “Impedance and Piezoelectric Constants of Phosphorous-Incorporated Pb(Zr0.52Ti0.48)O3 Ceramics,” Materials Letters, Vol. 58, No. 25, 2004, pp. 3201-3205.
http://dx.doi.org/10.1016/j.matlet.2004.06.011

[11]   A. V. Turik, M. F. Kupriyanov, E. N. Sidorenko and S. M. Zaitsev, “Behavior of Piezoceramics of Type Pb(Zr,Ti)O3, near the Region of the Morphotropic Transition,” Soviet Physics-Technical Physics, Vol. 25, No. 10, 1980, pp. 1251-1254.

[12]   K. Kakegawa, J. Mohri, T. Takahashi, H. Yamamura and S. Shirasaki, “A Compositional Fluctuation and Properties of Pb(Zr, Ti)O3,” Solid State Communications, Vol. 24, No. 11, 1977, pp. 769-772.
http://dx.doi.org/10.1016/0038-1098(77)91186-3

[13]   S. A. Mabud, “The Morphotropic Phase Boundary in PZT Solid Solution,” Journal of Applied Crystallographic, Vol. 13, 1980, pp. 211-216.
http://dx.doi.org/10.1107/S0021889880011958

[14]   P. Ari-Gur and L. Benguigui, “X-Ray Study of the PZT Solid Solutions near the Morphotropic Phase Transition,” Solid State Communications, Vol. 15, No. 6, 1974, pp. 1077-1079. http://dx.doi.org/10.1016/0038-1098(74)90535-3

[15]   A. Boutarfaia and S. E. Bouaoud, “Tetragonal and Rhombohedral Phase Co-Existence in the System: PbZrO3PbTiO3-Pb(Fe1/5, Ni1/5,Sb3/5)O3,” Ceramics International, Vol. 22, No. 4, 1996, pp. 281-286.
http://dx.doi.org/10.1016/0272-8842(95)00102-6

[16]   R. B. Atkin and R. M. Fulrath, “Point Defects and Sintering of Lead Zirconate-Titanate,” Journal of American Ceramic Society, Vol. 54, No. 5, 1971, pp. 265-270.
http://dx.doi.org/10.1111/j.1151-2916.1971.tb12286.x

[17]   O. Ohtaka, R. Von Der Mühll and J. Ravez, “Low-Temperature Sintering of Pb(Zr,Ti)O3 Ceramics with the Aid of Oxyfluoride Additive: X-Ray Diffraction and Dielectric Studies,” Journal American Ceramic Society, Vol. 78, No. 3, 1995, pp. 805-808.
http://dx.doi.org/10.1111/j.1151-2916.1995.tb08251.x

[18]   H. R. Rukmini, R. N. P. Choudhary and D. L. Prabhakara, “Sintering Temperature Dependent Ferroelectric Phase Transition of Pb0.91(La1-z/3Liz)0.09(Zr0.65Ti0.35)0.9775O3,” Journal of Physics and Chemistry of Solids, Vol. 61, No. 11, 2000, pp. 1735-1743.
http://dx.doi.org/10.1016/S0022-3697(00)00040-8

[19]   W. Chaisan, R. Yimnirun, S. Ananta and D. P. Cann, “Phase Development and Dielectric Properties of (1-x)Pb (Zr0.52Ti0.48)O3-xBaTiO3 Ceramics,” Materials Science and Engineering B, Vol. 132, No. 3, 2006, pp. 300-306.
http://dx.doi.org/10.1016/j.mseb.2006.04.033

 
 
Top