JPEE  Vol.1 No.5 , October 2013
Industrial Feasiblity of Direct Methane Conversion to Hydrocarbons over Fe-Based Fischer Tropsch Catalyst
Abstract: Recently, as a direct consequence of the dwindling world oil reserves and the growing awareness of the environmental problems associated with the use of coal as energy source, there is growing interest in cheaper, abundant and cleaner burning methane. The Gas-to-Liquid technology offers perhaps the most attractive routes for the exploitation of the world huge and growing natural gas resources. Using this process the erstwhile stranded gas is converted to premium grade liquid fuels and chemicals that are easily transported. However, a widespread application of the GTL process is being hampered by economical and technical challenges. The high cost of synthesis gas, for instance, weighs heavily on the economics and competitiveness of the process limiting its wider application. This work presented a modified Gas-to-Liquid process that eliminates the costly synthesis gas production step. The proposed process utilized an alternative pathway for methane activation via the production of chloromethane derivatives which are then converted to hydrocarbons. It established that hydrocarbons mainly olefins can be economically produced from di- and tri-chloro- methanes over a typical iron-based Fischer Tropsch catalysts in a moving bed reactor at industrially relevant conditions. Some of the attractions of the proposed process include a) the elimination of the costly air separation plant requirement b) high process selectivity and c) significant reduction of carbon dioxide emissions thereby saving on feedstock loss and the costly CO2 removal and isolation processes.
Cite this paper: Rabiu, A. and Yusuf, I. (2013) Industrial Feasiblity of Direct Methane Conversion to Hydrocarbons over Fe-Based Fischer Tropsch Catalyst. Journal of Power and Energy Engineering, 1, 41-46. doi: 10.4236/jpee.2013.15006.

[1]   A. Sarkar, R. A. Keogh, S. Bao, et al., “Fischer Tropsch Synthesis with Promoted Iron Catalyst: Reaction Pathways for Acetic Acid, Glycol, 2-Ethoxyethanol and 1,2-Diethoxyethane,” Applied Catalysis A, Vol. 341, 2008, pp. 146-153.

[2]   J. Gaube and H. F. Klein, “Studies on the Reaction Mechanism of the Fischer-Tropsch Synthesis on Iron and Cobalt,” Journal of Molecular Catalysis A: Chemical, Vol. 283, No. 1-2, 2008, pp. 60-68.

[3]   BP, “BP Statistical Review of World Energy,” 2013.

[4]   OGJ, “Worldwide Look at Reserves and Production,” Oil and Gas Journal, Vol. 110, No. 1, 2012, p. 34.

[5]   E. D. Attanasi and P. A. Freeman, “Role of Stranded Gas in Increasing Global Gas Supplies,” US Geological Survey, Open-File Report 2013-1044, 2013.

[6]   S. G. Podkolzin, E. E. Stangland, M. E. Jones, et al., “Methyl Chloride Production from Methane over Lanthanum-Based Catalysts,” Journal of American Chemical Society, Vol. 129, No. 9, 2007, pp. 2569-2576.

[7]   A. P. Steynberg, “Introduction to Fischer-Tropsch Technology,” In: A. P. Steynberg and M. Dry, Eds., Studies in Surface Science and Catalysis: Fischer-Tropsch Technology, Elsevier B.V., Amsterdam, 2004, pp. 1-63.

[8]   D. Wolman, “Gas Goes Solid,” Technology Review, 2003.

[9]   B. Svensson and S. Djumena, “A Public-Private Partnership to Reduce Global Gas Flaring,” 2002.

[10]   T. Obadina, “Harnessing Abundant Gas Reserves in ‘Nigeria: Country in Focus’,” Africa Recovery, Vol. 13, No. 1, 1999, p. 16.

[11]   C. Higman and M. J. van der Burgt, “Gasification,” 2nd Edition, Gulf Publishing Press, 2007, p. 18.

[12]   W. Ma, G. Jacobs, Y. Ji, et al., “Fischer-Tropsch Synthesis: Influence of CO Conversion on Selectivities, H2/CO Usage Ratios, and Catalyst Stability for a Ru Promoted Co/Al2O3 Catalyst Using a Slurry Phase Reactor,” Topics in Catalysis, Vol. 54, No. 13, 2011, pp. 757-767.

[13]   C. G. Visconti, L. Lietti, E. Tronconi, et al., “Fischer-Tropsch Synthesis on a Co/Al2O3 Catalyst with CO2 Containing Syngas,” Applied Catalysis A: General, Vol. 355, No. 1-2, 2009, pp. 61-68.

[14]   H. C. Heng and S. Idrus, “The Future of Gas to Liquids as a Gas Monetisation Option,” Journal of Natural Gas Chemistry, Vol. 13, 2004, pp. 63-70.

[15]   A. Holmen, “Direct Conversion of Methane to Fuels and Chemicals,” Catalysis Today, Vol. 142, No. 1-2, 2009, pp. 2-8.

[16]   R. B. Anderson, “The Fischer-Tropsch Synthesis,” Academic Press, New York, 1984.

[17]   L. A. Noronha, E. F. Souza-Aguiar and C. J. A. Mota, “Conversion of Chloromethane to Light Olefins Catalyzed by ZSM-5 Zeolites,” Catalysis Today, Vol. 101, No. 1, 2005, pp. 9-13.

[18]   H. Schulz, “Short History and Present Trends of Fischer-Tropsch Synthesis,” Applied Catalysis A, Vol. 186, No. 1-2, 1999, pp. 3-12.

[19]   I. T. Horváth, “Encyclopedia of Catalysis,” John Wiley & Sons, New Jersey, 2003.

[20]   Y. Ogawa, K. Hasenaka and Y. Kawasaki, “Research on Marketability of GTL: Liquid Fuel from Natural Gas,” IEEJ, 2000.

[21]   J. M. G. Carballo, J. Yang, A. Holmen, et al., “Catalytic Effects of Ruthenium Particle Size on the Fischer-Tropsch Synthesis,” Journal of Catalysis, Vol. 284, No. 1, 2011, pp. 102-108.

[22]   A. Tavasoli, A. Khodadadi, Y. Mortazavi, et al., “Lowering Methane and Raising Distillates Yields in Fischer-Tropsch Synthesis by Using Promoted and Unpromoted Cobalt Catalysts in a Dual Bed Reactor,” Fuel Processing Technology, Vol. 87, 2006, pp. 641-647.

[23]   P. K. Bakkerud, “Update on Synthesis Gas Production for GTL,” Catalysis Today, Vol. 106, No. 1-4, 2005, pp. 30-33.

[24]   B. Ghaemmaghami, “GTL: Progress and Prospects—Study Yields Generic, Coastal Based GTL Plant,” Oil & Gas Journal, Vol. 99, No. 11, 2001, pp. 23-31.

[25]   M. E. Dry, “The Fischer-Tropsch Process: 1950-2000,” Catalysis Today, Vol. 71, No. 3-4, 2002, pp. 227-241.

[26]   D. J. O’Rear and C. L. Kibby,“Control of CO2 Emissions from a Fischer-Tropsch Facility by Use of Multiple Reactors,”United States Patent No. US6992113 B2 2005, International Application No. PCT/US2004/035610.

[27]   V. N. Rozanov and Y. A. Treger,“Kinetics of the GasPhase Thermal Chlorination of Methane,”Kinetics and Catalysis, Vol. 51, No. 5, 2010, pp. 635-643.

[28]   Y. A. Treger, V. N. Rozanov, S. V. Sokolova, et al., “Producing Ethylene and Propylene from Natural Gas via the Intermediate Synthesis of Methyl Chloride and Its Subsequent Catalytic Pyrolysis,” Catalysis in Industry, Vol. 4, No. 4, 2012, pp. 231-235.

[29]   M. C. Alvarez Galvan, N. Mota, M. Ojeda, et al., “Direct Methane Conversion Routes to Chemicals and Fuels,” Catalysis Today, Vol. 171, No. 1, 2011, pp. 15-23.

[30]   M. R. Rahimpour, M. Jafari and D. Iranshahi, “Progress in Catalytic Naphtha Reforming Process: A Review,” Applied Energy, Vol. 109, 2013, pp. 79-93.

[31]   J. He, T. Xu, Z. Wang, et al., “Transformation of Methane to Propylene: A Two-Step Reaction Route Catalyzed by Modified CeO2 Nanocrystals and Zeolites,” Angewandte Chemie, Vol. 124, No. 10, 2012, pp. 2488-2492.

[32]   A. M. Rabiu, E. van Steen and M. Claeys, “Further Investigation into the Formation of Alcohol during Fischer Tropsch Synthesis on Fe-Based Catalysts,” APCBEE Procedia, Vol. 3, 2012, pp. 110-115.

[33]   K. Iwanaga, K. Seki, T. Hibi, et al., “The Development of Improved Hydrogen Chloride Oxidation Process,” Vol. 2004, Sumitomo Kagaku, Japan, 2004.

[34]   M. A. G. Hevia, A. P. Amrute, T. Schmidt, et al., “Transient Mechanistic Study of the Gas-Phase HCl Oxidation to Cl2 on Bulk and Supported RuO2 Catalysts,” Journal of Catalysis, Vol. 276, No. 1, 2010, pp. 141-151.

[35]   A. P. Amrute, C. Mondelli, M. Moser, et al., “Performance, Structure, and Mechanism of CeO2 in HCl Oxidation to Cl2,” Journal of Catalysis, Vol. 286, 2012, pp. 287-297.

[36]   J. Pe-rez-Ramirez, C. Mondelli, T. Schmidt, et al., “Sustainable Chlorine Recycling via Catalysed HCl Oxidation: From Fundamentals to Implementation,” Energy & Environmental Science, Vol. 4, No. 12, 2011, pp. 4786-4799.

[37]   N. López, J. Gómez-Segura, R. P. Marín, et al., “Mechanism of HCl Oxidation (Deacon Process) over RuO2,” Journal of Catalysis, Vol. 255, No. 1, 2008, pp. 29-39.

[38]   M. Hammes, M. Valtchev, M. B. Roth, et al., “A Search for Alternative Deacon Catalysts,” Applied Catalysis B: Environmental, Vol. 132-133, 2013, pp. 389-400.

[39]   H. Over and R. Schomäcker, “What Makes a Good Catalyst for the Deacon Process?” ACS Catalysis, Vol. 3, No. 5, 2013, pp. 1034-1046.

[40]   J. P. Hofmann, S. Zweidinger, A. P. Seitsonen, et al.,“Dynamic Response of Chlorine Atoms on a RuO2(110) Model Catalyst Surface,” Physical Chemistry Chemical Physics, Vol. 12, No. 47, 2010, pp. 15358-15366.

[41]   S. Zweidinger, J. P. Hofmann, O. Balmes, et al., “InSitu Studies of the Oxidation of HCl over RuO2 Model Catalysts: Stability and Reactivity,” Journal of Catalysis, Vol. 272, No. 1, 2010, pp. 169-175.

[42]   M. Moser, C. Mondelli, T. Schmidt, et al.,“Supported CeO2 Catalysts in Technical Form for Sustainable Chlorine Production,”Applied Catalysis B: Environmental, Vol. 132-133, 2013, pp. 123-131.