JPEE  Vol.1 No.5 , October 2013
New Multilevel Mixed Topology Development to Improve Inverter Robustness for Domestic Photovoltaic Installations
Abstract: Multilevel inverters are well used in grid connected domestic photovoltaic applications because of their ability to generate a very good quality of waveforms, reducing switching frequency, and their low voltage stress across the power devices. However, this kind of inverter has to be modified to both limit common-mode currents and improve the robustness of the system. This paper presents a new mixed 5-level inverter that meets these challenges. The operating principle of the converter is proposed. Several experimental measurements are described to validate this new concept. The output voltage and current and the THD of the output voltage are particularly discussed.
Cite this paper: Jacques, S. , Caldeira, A. , Schellmanns, A. , Ren, Z. and Batut, N. (2013) New Multilevel Mixed Topology Development to Improve Inverter Robustness for Domestic Photovoltaic Installations. Journal of Power and Energy Engineering, 1, 1-6. doi: 10.4236/jpee.2013.15001.

[1]   K. K. Prajapat, A. Katariya, A. Kumar and S. Shukla, “Simulation and Testing of Photovoltaic with Grid Connected System,” Proceedings of the International Conference on Computational Intelligence and Communication Networks, Gwalior, 7-9 October 2011, pp. 692-697.

[2]   D. Barater, G. Franceschini and E. Lorenzani, “Unipolar PWM for Transformerless Grid-Connected Converters in Photovoltaic Plants,” Proceedings of the International Conference on International Conference on Clean Electrical Power, 2009, pp. 387-392.

[3]   G. Vazquez, T. Kerekes, J. Rocabert, P. Rodriguez, R. Teodorescu and D. Aguilar, “A Photovoltaic Three-Phase Topology to Reduce Common Mode Voltage,” Proceedings of the IEEE International Symposium on Industrial Electronics, 2010, pp. 2885-2890.

[4]   T. Kerekes, R. Teodorescu, and U. Borup, “Transformerless Photovoltaic Inverters Connected to the Grid,” Proceedings of the IEEE Applied Power Electronics Conference, 2007, pp. 1733-1737.

[5]   DKE Deutsche Kommission Elektrotechnik Elektronik Informations Technik im DIN und VDE, DIN VDE 0126- 1-1, 2005.

[6]   Y. Cheng, C. Qian, M. L. Crow and S. Pekarek, “A Comparison of Diode-Clamped and Cascaded Multilevel Converters for a STATCOM with Energy Storage,” IEEE Transactions on Industrial Electronics, Vol. 53, No. 5, 2006, pp. 1512-1521.

[7]   M. Baldé, M. Lamine Doumbia, A. Chériti and C. Benachaiba, “Comparative Study of NPC and Cascaded Converters Topologies,” Renewable Energy and Power Quality Journal, No. 9, 2011.

[8]   S. B. Kjaer, J. K. Pedersen and F. Blaabjerg, “A Review of Single-Phase Grid-Connected Inverters for Photovoltaic Modules,” IEEE Transactions on Industry Applications, Vol. 41, No. 5, 2005, pp. 1292-1306.

[9]   P. K. Chaturvedi, S. Jain and P. Agarwal, “Reduced Switching Loss Pulse Width Modulation Technique for Three-Level Diode Clamped Inverter,” IET Power Electronics, Vol. 4, No. 4, 2011, pp. 393-399.

[10]   S. S. Dash, P. Palanivel and S. Premalatha, “Performance Analysis of Multi-level Inverters Using Variable Switching Frequency Carrier Based PWM Techniques,” Renewable Energy and Power Quality Journal, No. 10, 2012.

[11]   T. Suroso, “Common-Emitter Topology of Multilevel Current-Source Pulse Width Modulation Inverter with Chopper-Based dc Current Sources,” IET Power Electronics, Vol. 4, No. 7, 2011, pp. 759-766.

[12]   A. Caldeira, S. Jacques, A. Schellmanns, J.-C. Lebunetel, N. Batut and L. Gonthier, “Development of a New Mixed 5-Level Inverter for 3 kW Household Photovoltaic Applications,” Renewable Energy and Power Quality Journal, No. 11, 2013.

[13]   S. Shobana and J. PadmaPriya, “Improved High Efficiency Inverter with H6 Type Configuration to Eliminate CMLC for PV System,” International Journal of Advancements in Electrical and Electronics Engineering, Vol. 2, No. 1, 2013, pp. 49-58.