Back
 AJAC  Vol.2 No.2 , May 2011
Dielectric Analysis of Response Time in Electrorheological Fluids Developed for Medical Devices
Abstract: Three electrorheological fluids (ERFs) of recently synthesized Polyaniline.HCl and Cellulose fluids as well as a commercial product from Fludicon® (Germany), were evaluated with a two-electrode probe unit and by Dielectric Analysis (DEA). The study was a part of an ongoing medical device development project. The dielectric response times were calculated using the critical peak frequency in a corresponding Debye plot of Tan Delta (loss factor/permittivity) vs. log frequency. The DEA revealed the response times (tau, τ) in ms. The Fludicon® ERF was DEA durable (repeat cycles produced same results) and the τ was temperature dependent: 16 ms at 25°C and 0.16 ms at 80°C. The Cellulose ERF was somewhat DEA durable and the τ was 5.5 ms at 25°C and 0.21 ms at 80°C. The response times were logarithmic with the temperature (°C) with a correlation coefficient of >0.98 for the Cellulose and Fludicon® ERFs. The Polyaniline ERF had a τ of 53 ms at 25°C in the 1st DEA run and there was no indication of a τ for the remaining DEA tests.
Cite this paper: nullN. Perera, M. Maheswaram, D. Mantheni, D. Perera, M. Matthews, A. Riga and T. Yellowe, "Dielectric Analysis of Response Time in Electrorheological Fluids Developed for Medical Devices," American Journal of Analytical Chemistry, Vol. 2 No. 2, 2011, pp. 85-92. doi: 10.4236/ajac.2011.22009.
References

[1]   J. Wei, L. Zhao, S. Peng, J. Shi, Z. Liu and W. Wen, “Wettability of Urea-Doped TiO2 Nanoparticles and Their High Electrorheological Effects,” Journal of Sol-Gel Science and Technology, Vol. 47, No. 3, 2008, pp. 311-315. doi:10.1007/s10971-008-1787-z

[2]   T. Tilki, M. Yavuz, C. Karabacak, M. Cabuk and M. Ulutuerk, “Investigation of Electrorheological Properties of Biodegradable Modified Cellulose/Corn Oil Suspensions,” Carbohydrate Research, Vol. 345, No. 5, 2010, pp. 672-679. doi:10.1016/j.carres.2009.12.025

[3]   D. P. Park, J. Y. Hwang, H. J. Choi, C. A. Kim and M. S. Jhon, “Synthesis and Characterization of Polysaccharide Phosphates Based Electrorheological Fluids,” Materials Research Innovations, Vol. 7, No. 3, 2003, pp. 161-166. doi:10.1007/s10019-003-0242-6

[4]   J. Yin, X. Zhao, X. Xia, L. Xiang and Y. Qiao, “Electrorheological Fluids Based on Nano-Fibrous Polyaniline,” Polymer, Vol. 49, No. 20, 2008, pp. 4413-4419. doi:10.1016/j.polymer.2008.08.009

[5]   Y. Liu and P. P. Phule, “Structure Formation in Novel Electrorheological (ER) Fluids Based on Ultrafine Particles of Electronic Ceramics,” Polymer Preprints (Ame- rican Chemical Society, Division of Polymer Chemistry), Vol. 35, No. 2, 1994, pp. 347-348.

[6]   D. Kittipoomwong, D. J. Klingenberg, Y. M. Shkel, J. F. Morris and J. C. Ulicny. “Transient Behavior of Electrorheological Fluids in Shear Flow,” Journal of Rheology, Vol. 52, No. 1, 2008, pp. 225-241. doi:10.1122/1.2794803

[7]   W. M. Winslow, “Induced Fibrillation of Suspensions,” Journal of Applied Physics, Vol. 20, No. 12, 1949, pp. 1137-1140. doi:10.1063/1.1698285

[8]   Z. P. Shulman, R. Gorodkin, E. Korobko and V. Gleb. “The Electrorheological Effect and Its Possible Uses,” Journal of Non-Newtonian Fluid Mechanics, Vol. 8, No. 1-2, 1981, pp. 29-41. doi:10.1016/0377-0257(81)80003-1

[9]   J. P. Coulter, K. D. Weiss and J. D. Carlson, “Engineering Applications of Electrorheological Materials,” Journal of Intelligent Material Systems and Structures, Vol. 4, No. 2, 1993, pp. 248-259. doi:10.1177/1045389X9300400215

[10]   J. W. Pialet and K. O. Havelka. “Electrorheological Tech- nology: The Future is Now,” Chemtech, Vol. 26, 1996, pp. 3645-3653.

[11]   C. F. Zukoski, “Material Properties and the Electrorheological Response,” Annual Review of Materials Science, Vol. 23, 1993, pp. 45-78. doi:10.1146/annurev.ms.23.080193.000401

[12]   A. T. Riga and L. Judovits, “Material Characterization by Dynamic and Modulated Thermal Analytical Techniques,” ASTM Special Technical Publication, USA, 2001.

[13]   L. Nunez-Regueira, S. Gomez-Barreiro and C. A. Gracia-Fernandez, “Study of the Influence of Isomerism on the Curing Properties of the Epoxy System DGEBA (n = 0)/1,2 DCH by DEA and MDSC,” Journal of Thermal Analysis and Calorimetry, Vol. 82, No. 3, 2005, pp. 797-801. doi:10.1007/s10973-005-0966-1

[14]   C. M. Kinart, W. J. Kinart, D. Checinska-Majak and A. Bald, “Densities and Relative Permittivities for Mixtures of 2-Methoxyethanol with DEA and TEA, at Various Temperatures,” Journal of Thermal Analysis and Calorimetry, Vol. 75, No. 1, 2004, pp. 347-354. doi:10.1023/B:JTAN.0000017355.26845.a4

[15]   N. Zanati, M. E. Mathews, N. I. Perera, J. J. Moran, J. A. Boutros, A. T. Riga and M. Bayachou, “Cholesterol Levels and Activity of Membrane Bound Proteins: Characterization by Thermal and Electrochemical Methods,” Journal of Thermal Analysis and Calorimetry, Vol. 96, No. 3, 2009, pp. 669-672. doi:10.1007/s10973-009-0032-5

[16]   M. E. Matthews, I. Atkinson, L. Presswala, O. Najjar, N. Gerhardstein, R. Wei, E. Rye and A. T. Riga, “Dielectric Classification of D and L Amino Acids by Thermal and Analytical Methods,” Journal of Thermal Analysis and Calorimetry, Vol. 93, No. 1, 2008, pp. 281-287. doi:10.1007/s10973-007-8835-8

[17]   L. Johnston, “ Electrorheological Dampers for Industrial and Mobile Applications—An Overview of Design Variations, Product Realisation and Performance,” Proceedings of the 11th International Conference on New Actuators, Bremen, 9-11 June 2008, p. 499.

[18]   S. Schneider, K. Holzmann, W. Kemmetmüller, L. Johnston and D. Li?man, “Development and Testing of a Semi-Active Suspension System for Off-Road Trucks Using Electrorheological Dampers,” Proceedings of the 11th International Conference on New Actuators, Bremen, 9-11 June 2008, p. 485.

[19]   M. Gurka, D. Adams, L. Johnston and R. Petricevic, “New Electrorheological Fluids—Characteristics and Implementation in Industrial and Mobile Applications,” Journal of Physics: Conference Series, Vol. 149, No. 1 2009, Article ID 012008.

[20]   S. Ulrich, G. B?hme and R. Bruns. “Measuring the Response Time and Static Rheological Properties of Electrorheological Fluids with Regard to the Design of Valves and Their Controllers,” Journal of Physics: Conference Series, Vol. 149, No. 1, 2009, Article ID 012031.

 
 
Top