Back
 EPE  Vol.5 No.9 , November 2013
Effect of Generating Heat on Ozone Generation in Dielectric Cylinder-Cylinder DBD Ozone Generator
Abstract: A cylinder-cylinder dielectric-barrier discharge (DBD) ozone generator has been developed. The ozone concentration was measured at an oxygen pressure of 1.02 atm and an oxygen flow rate of 12 L/min. The heat generated in the ozone tube during the operation of the ozone generator was investigated using a thermal camera. The infrared (IR) images and corresponding temperatures of the ozone tube surfaces at different operating times were observed. The IR images showed the generating of the inhomogeneous heat-up along the ozone tube surface which results in the decrease of the ozone production efficiency.
Cite this paper: S. Boonduang and P. Limsuwan, "Effect of Generating Heat on Ozone Generation in Dielectric Cylinder-Cylinder DBD Ozone Generator," Energy and Power Engineering, Vol. 5 No. 9, 2013, pp. 523-527. doi: 10.4236/epe.2013.59057.
References

[1]   U. Kogelschatz, “Advanced Ozone Generator,” Plenum Press, New York, 1998, p. 87.

[2]   B. L. Loeb, “Ozone: Science & Engineering: ThirtyThree Years and Growing,” Ozone: Science & Engineering, Vol. 33, 2011, pp. 329-342.
http://dx.doi.org/10.1080/01919512.2011.584302

[3]   R. G. Rice, “Ozone in the United States of America-State of the Art,” Ozone: Science & Engineering, Vol. 21, 1999, pp. 99-118.
http://dx.doi.org/10.1080/01919519908547244

[4]   A. Bohme, “Ozone Technology of German Industrial Enterprises,” Ozone: Science & Engineering, Vol. 21, 1999, pp. 163-176.
http://dx.doi.org/10.1080/01919519908547250

[5]   U. Kogelschatz and B. Eliasson, “Handbook of Electrostatic Process,” Marcel Dekker, New York, 1995.

[6]   X. Xu, “Dielectric Barrier Discharge-Properties and Applications,” Thin Solid Films, Vol. 390, No. 1-2, 2001, pp. 237-242.
http://dx.doi.org/10.1016/S0040-6090(01)00956-7

[7]   M. Moreau, N. Orange and M. G. J. Feuilloley, “NonThermal Plasma Technologies: New Tools for Bio-Decontamination,” Biotechnology Advances, Vol. 26, No. 6, 2008, pp. 610-617.
http://dx.doi.org/10.1016/j.biotechadv.2008.08.001

[8]   K. Takaki, Y. Hatanaka, K. Arima, S. Mukaigawa and T. Fujiwara, “Influence of Electrode Configuration on Ozone Synthesis and Microdischarge Property in Dielectric Barrier Discharge Reactor,” Vacuum, Vol. 83, No. 1, 2009, pp. 128-132.
http://dx.doi.org/10.1016/j.vacuum.2008.03.047

[9]   Z. Fang, Y. Qiu, Y. Sun, H. Wang and K. Edmund, “Experimental Study on Discharge Characteristics and Ozone Generation of Dielectric Barrier Discharge in A Cylinder-Cylinder Reactor and a Wire-Cylinder Reactor,” Journal Electrostatics, Vol. 66, No. 7-8, 2008, pp. 421-426.
http://dx.doi.org/10.1016/j.elstat.2008.04.007

[10]   S. L. Park, J. D. Moon, S. H. Lee and S. Y. Shin, “Effective Ozone Generation Utilizing a Meshed-Plate Electrode in A Dielectric-Barrier Discharge Type Ozone Generator,” Journal Electrostatics, Vol. 64, No. 5, 2006, pp. 275-282.
http://dx.doi.org/10.1016/j.elstat.2005.06.007

[11]   M. Takayama, K. Ebihara, H. Stryczewska, T. Ikegami, Y. Gyoutoku, K. Kubo and M. Tachibana, “Ozone Generation by Dielectric Barrier Discharge for Soil Sterilization,” Thin Solid Films, Vol. 506-507, 2006, pp. 396-399.
http://dx.doi.org/10.1016/j.tsf.2005.08.332

[12]   J. D. Moon and J. S. Jung, “Effective Corona Discharge and Ozone Generation from a Wire-Plate Discharge System with a Slit Dielectric Barrier,” Journal Electrostatics, Vol. 65, No. 10-11, 2007, pp. 660-666.
http://dx.doi.org/10.1016/j.elstat.2007.05.001

[13]   I. Jenei and E. Kiss, “Development of the Ozone Generation by the Variation of Auxiliary Electrodes,” Journal Electrostatics, Vol. 63, No. 6-10, 2005, pp. 985-991.
http://dx.doi.org/10.1016/j.elstat.2005.03.072

[14]   S. Kaneda, N. Hayashi, S. Ihara, S. Satoh and C. Yamabe “Application of Dielectric Material to Double-Discharge-Type Ozonizer,” Vacuum, Vol. 73, No. 3-4, 2004, pp. 567-571.
http://dx.doi.org/10.1016/j.vacuum.2003.12.088

[15]   M. Shimosaki, N. Hayashi, S. Ihara, S. Satoh and C. Yamabe, “Effect of Trigger Electrodes Configuration of A Double Discharge Ozonizer on Ozone Generation Characteristics,” Vacuum, Vol. 73, No. 3-4, 2004, pp. 573-577.
http://dx.doi.org/10.1016/j.vacuum.2003.12.089

[16]   Y. M. Sung and T. Sakoda, “Optimum Conditions for Ozone Formation in a Micro Dielectric Barrier Discharge,” Surface and Coatings Technology, Vol. 197, No. 2-3, 2005, pp. 148-153.
http://dx.doi.org/10.1016/j.surfcoat.2004.09.031

[17]   J. S. Jung and J. D. Moon, “Corona Discharge and Ozone Generation Characteristics of a Wire-Plate Discharge System with A Glass-Fiber Layer,” Journal Electrostatics, Vol. 66, No. 5-6, 2008, pp. 335-341.
http://dx.doi.org/10.1016/j.elstat.2008.02.003

 
 
Top