Back
 EPE  Vol.5 No.4 B , July 2013
Amalgamated-signal Cymometer Based on TMS320F28335
Abstract: In our design, an amalgamated-signal cymometer is developed with a TMS320F28335 DSP chip ---- we use its on-chip 12-bit 16-channel AD to conduct a novel dual-sequencer synchronize sampling and averaged to improve the accuracy. Considering the algorithm, we use TI's C28x_FPU_Lib to conduct a FFT with sampled results and correct spectrum with Time-Shift Phase Difference Correcting Spectrum Method based on all-phase spectral analysis. Namely, we design a sampling-frequency self-adaption algorithm which makes operation keep on without outside-hardware command. Actually, the test result shows that our design's frequency resolution ratio is up to 0.4%, and the maximum frequency’s D-value between main and minor signal is up to 29.99 kHz.
Cite this paper: Z. Xu, W. Lv and Z. Li, "Amalgamated-signal Cymometer Based on TMS320F28335," Energy and Power Engineering, Vol. 5 No. 4, 2013, pp. 1226-1229. doi: 10.4236/epe.2013.54B232.
References

[1]   K. J. Xu, “Theory and Application of TMS320X281X DSP,” Beijing University of Aeronautics and Astronautics Press, 2006.

[2]   K. Ding, “Discrete Spectrum Correction Theory and Technology,” Science Press, 2007.

[3]   RIFEDG, VINCENTGA. Use of the discrete fourier transform in the measurement of levels and tones[ J]. Bell Syst. Tech. J. , 1970, 49( 2): 197- 228.

[4]   Z. H. Wang, “Digital Signal All Phase Spectrum Analysis and Filtering Technology,” Electronic Industry Press, 2009.

[5]   “TMS320F28335 Data Manual,” Texas Instruments.

[6]   G. Z. Zhao, “Signal Analysis and Processing,” Mechanical Industry Press, 2005.

[7]   Z. Z. Li, “Digital Signal Processing and Application with MATLAB,” Tsinghua University Press, 2008.

[8]   “Assembly Good Paper of C2000 Grand Prix of TI C2000 Senior Embedded Controlled in 2008,” Electronic Industry Press, 2008.

 
 
Top