Back
 EPE  Vol.5 No.4 B , July 2013
Study on Electromagnetic Transient Condition of EMU Passing by Phase-separation with Electric Load in High-speed Railway
Abstract: Aiming at the complex electromagnetic transient process of EMU passing by phase-separation with electric load in high-speed railway, mechanism of overvoltage caused by switching off, overvoltage caused by switching on and impact current is analyzed systematically in this article. π-type equivalent circuit of feeding section is put forward in the analysis of overvoltage mechanism. Overvoltage and overcurrent model of passing by phase-separation with electric load are also built. Correctness of mechanism was validated by simulation. In addition, the methods to solve the influence on substations, transformers and protection devices in this process are put forward, which provides a new idea on passing by phase-separation with electric load technology.
Cite this paper: X. Guo, J. Wei, L. Xu, S. Gao and Z. Han, "Study on Electromagnetic Transient Condition of EMU Passing by Phase-separation with Electric Load in High-speed Railway," Energy and Power Engineering, Vol. 5 No. 4, 2013, pp. 1061-1068. doi: 10.4236/epe.2013.54B202.
References

[1]   X. C. Chen, “Railway Power Supply Relay Protection and Automation,” China Railway Press, 2010.

[2]   J. Z. Wei, X. X. Guo and Z. Q. Han, “Protection on the Condition of EMU Passing by Phase-separation with Electric Load in High-speed Railway,”APAP2011, 2011,10.

[3]   Z. Q. Han, “Study on Dynamic Process and Feeder Protection on the Condition of EMU Passing by Phase-separation with Electric Load in High-speed Railway,” Academic trends, Vol. 4, 2008, pp.10-12.

[4]   Z. Z. Li, “Analysis of Causes of Tripping during Electric locomotive’s Passage of Neutral Section and Study of Its Prevention Measures,” Electric Railway, Vol. 4, 2008, pp. 10-12.

[5]   S. B. Gao, Y. F. Wang and J. Zhang, “Analysis on Fault and Operating Features of Feeder Protection Against Wrong-phase Short Circuit for AC Traction Substation,” Journal of The China Railway Society, Vol. 4, 2000, pp. 24-27.

[6]   Y. H. Guo, J. S. Lian and K. L. Zhang, “Influnce of Auto-passing of Neutral Section on Electric Locomotive,” Electric Drive For Locomotive, Vol. 2, 2000, pp. 13-15.

[7]   G. Ma, G. N. Wu and T. Wang, “Simulation of Excitation Surge Current in Electric Locomotive and Analysis of Influence to Public Grid,” Electric Railway, Vol. 1, 2010, pp.1-4.

[8]   W. Ran, X. Li and B. Liu, “Research on Transient Process of Ground’s Auto-Passing Neutral Section at Switching Time,” Transactions of China Electrotechnical Society, Vol.11, 2011, pp. 150-154.

[9]   L. Q. Luo, Y. Wang and G. Chang, “Analysis of Inrush Current during Auto-passing Phase of Electric Locomotive,” Journal of Beijing Jiaotong University, Vol. 6, 2011, pp.57-61.

[10]   H. L. Weng, X. N. Lin and P. Liu, “A Novel Explanation to the Mal-operation of Differential Protection during the Loaded Transformer Energization,” Proceeding of the CSEE, Vol. 26, 2006, pp. 27-32.

[11]   W. Q. Sun, S. X. Shan and G. F. Zheng, “Comparsion between Home and Aboard of Automatic Passing over of Neutral Section Device,” Electric Railway, Vol. 2, 2002, pp. 12-16.

[12]   S. B. Yang, M. Huang and M. L. Wu, “High Speed EMU Modeling Based on the Measured Data,” Sustainable Power Generation and Supply, 2009.

 
 
Top