ICA  Vol.4 No.4 , November 2013
General Concave Integral Control
Abstract: In this paper, a class of fire-new general integral control, named general concave integral control, is proposed. It is derived by normalizing the bounded integral control action and concave function gain integrator, introducing the partial derivative of Lyapunov function into the integrator and originating a class of new strategy to transform ordinary control into general integral control. By using Lyapunov method along with LaSalle’s invariance principle, the theorem to ensure regionally as well as semi-globally asymptotic stability is established only by some bounded information. Moreover, the highlight point of this integral control strategy is that the integrator output could tend to infinity but the integral control action is finite. Therefore, a simple and ingenious method to design general integral control is founded. Simulation results showed that under the normal and perturbed cases, the optimum response in the whole domain of interest can all be achieved by a set of the same control gains, even under the case that the payload is changed abruptly.
Cite this paper: B. Liu, X. Luo and J. Li, "General Concave Integral Control," Intelligent Control and Automation, Vol. 4 No. 4, 2013, pp. 356-361. doi: 10.4236/ica.2013.44042.

[1]   H. K. Khalil, “Universal Integral Controllers for Minimum-Phase Nonlinear Systems,” IEEE Transactions on Automatic Control, Vol. 45, No. 3, 2000, pp. 490-494.

[2]   N. J. Krikelis and S. K. Barkas, “Design of Tracking Systems Subject to Actuator Saturation and Integrator Windup,” International Journal of Control, Vol. 39, No. 4, 1984, pp. 667-682.

[3]   R. Hanus, M. Kinnaert and J. L. Henrotte, “Conditioning Technique, a General Anti-windup and Bumpless Transfer Method,” Automatica, Vol. 23, No. 6, 1987, pp. 729739.

[4]   Y. Peng, D. Varanceic and R. Hanus, “Anti-windup, Bumpless, and Conditioned Transfer Techniques for PID Controllers,” IEEE Control Systems Magazine, Vol. 16, No. 4, 1996, pp. 48-57.

[5]   Y. Y. Cao, Z. L. Lin and G. W. David, “Anti-Windup Design of Output Tracking Systems Subject to Actuator Saturation and Constant Disturbances,” Automatica, Vol. 40, No. 7, 2004, pp. 1221-1228.

[6]   N. Marchand and A. Hably, “Global Stabilization of Multiple Integrators with Bounded Controls,” Automatica, Vol. 41, No. 12, 2005, pp. 2147-2152.

[7]   S. Seshagiri and H. K. Khalil, “Robust Output Feedback Regulation of Minimum-Phase Nonlinear Systems Using Conditional Integrators,” Automatica, Vol. 41, 2005, pp. 43-54.

[8]   K. J. Åstrom and L. Rundquist, “Integrator Windup and How to Avoid It,” Proceedings of the 1989 American Control Conference, Pittsburgh, 21-23 June 1989, pp. 1693-1698.

[9]   S. M. Shahruz and A. L. Schwartz, “Design and Optimal Tuning of Nonlinear PI Compensators,” Journal of Optimization Theory and Applications, Vol. 83, No. 1, 1994, pp. 181-198.

[10]   A. S. Hodel and C. E. Hall, “Variable-structure PID Control to Prevent Integrator Windup,” IEEE Transactions on Industrial Electronics, Vol. 48, 2001, pp. 442-451.

[11]   Y. Matsuda and N. Ohse, “An Approach to Synthesis of Low Order Dynamic Anti-windup Compensations for Multivariable PID Control Systems with Input Saturation,” Proceedings of the 2006 Joint SICE-ICASE Conference, Busan, 18-21 October 2006, pp. 988-993.

[12]   S. M. Shahruz and A. L. Schwartz, “Nonlinear PI Compensators that Achieve High Performance,” Journal of Dynamic Systems, Measurement and Control, Vol. 119, No. 1, 1997, pp. 105-110.

[13]   R. Kelly, “Global Positioning of Robotic Manipulators via PD Control Plus a Class of Nonlinear Integral Actions,” IEEE Transactions on Automatic Control, Vol. 43, No. 7, 1998, pp. 934-938.

[14]   S. Tarbouriech, C. Pittet and C. Burgat, “Output Tracking Problem for Systems with Input Saturations via Nonlinear Integrating Actions,” International Journal of Robust and Nonlinear Control, Vol. 10, No. 6, 2000, pp. 489-512.<489::AID-RNC489>3.0.CO;2-D

[15]   B. G. Hu, “A Study on Nnonlinear PID Controllers— Proportional Component Approach,” Acta Automatica Sinica, Vol. 32, 2006, pp. 219-227.

[16]   C. Q. Huang, X. F. Peng and J. P. Wang, “Robust Nonlinear PID Controllers for Anti-Windup Design of Robot Manipulators with an Uncertain Jacobian Matrix,” Acta Automatica Sinica, Vol. 34, 2008, pp. 1113-1121.

[17]   B. S. Liu and B. L. Tian, “General Integral Control,” Proceedings of the International Conference on Advanced Computer Control, Singapore, 22-24 January 2009, pp. 136-143.

[18]   B. S. Liu and B. L. Tian, “General Integral Control Design Based on Linear System Theory,” Proceedings of the 3rd International Conference on Mechanic Automation and Control Engineering, Baotou, Vol. 5, 2012, pp. 31743177.

[19]   B. S. Liu and B. L. Tian, “General Integral Control Design Based on Sliding Mode Technique,” Proceedings of the 3rd International Conference on Mechanic Automation and Control Engineering, Baotou, Vol. 5, 2012, pp. 3178-3181.

[20]   B. S. Liu, J. H. Li and X. Q. Luo, “General Integral Control Design via Feedback Linearization,” Accepted by Intelligent Control and Automation.

[21]   H. K. Khalil, “Nonlinear Systems,” 3rd Edition, Electronics Industry Publishing, Beijing, 2007, pp. 126-128, 482-484.