Back
 EPE  Vol.5 No.4 B , July 2013
Research on Fault-feeder Selection Dvice
Abstract: The compensation current of the arc-suppressing coil makes the phase and amplitude of zero-sequence measurement current of the earthed fault feeder to vary. It is very hard to detect the fault feeder by using existing detectors based on single method. In this paper, integrative feeder selection strategy—zero sequence current increment method and the direction of transient current— is put forward. Based on the integrative feeder selection strategy, the design of fault-feeder selection device for one-phase-to ground fault on resonance grounding system is presented. For the purpose of testing and validating the operating principle of the device, the experiment of single-phase-to-ground fault has been carried out on the simulation of 1.2 kV power network. The results from many repeat experiments show that stability of the fault selection device is satisfactory.
Cite this paper: Z. Zhuo, H. Sun and H. Ji, "Research on Fault-feeder Selection Dvice," Energy and Power Engineering, Vol. 5 No. 4, 2013, pp. 937-940. doi: 10.4236/epe.2013.54B179.
References

[1]   H. Li, Y. Tang and C. Q. I.Sun, “Line Selection Device fo Small Current Single-phase Grounding Fault Bsed on Integrative Line Seletion Strategy”Industry and Mine Atomation, pp. 35-38, April 2012.

[2]   X. C. Wang, “Zero Sequence Current Incre-mental Ratio Method in Small Current Grounding Fault Line Identification,” Vol. 20. Power System Protecetion and control, October 2011, pp.125-129.

[3]   H. C. Su, “Fault Line Seletion of Distribution Power System,” China Machine press, Beijing 2008.

[4]   K. Cheng and Y. Tang, “Single-Phase-to-Ground Fault Protection for Indirect Grounding Power System,” High Voltage Engineering.

[5]   J. LEE, “The Research on Arc Suppression Coil and Line Selection Control Technology in Distribution Network,” North China Electric Powe Unversity, 2007.

[6]   Y. Yorozu, M. Hirano, K. Oka and Y. Tagawa, “Electron Spectroscopy Studies on Magneto-Optical Media and Plastic Substrate Interface,” IEEE Transl. Journal of Magnetics in Japan, Vol. 2, No. 8, 1987, pp. 740-741. doi:10.1109/TJMJ.1987.4549593

[7]   M. Young, “The Technical Writer's Handbook,” Mill Valley, CA: University Science, 1989.

 
 
Top