Back
 EPE  Vol.5 No.4 B , July 2013
Comparisons between CRM and CCM PFC
Abstract: The paper presents detailed comparisons between CRM (critical conduction mode) and CCM (continuous conduction mode) control schemes used for Boost PFC converter. The two schemes are analyzed and compared under the chips of L6561 and UC 3854 which are commonly used for CRM and CCM respectively. Both schemes are based on multiplier; however, the CCM is more complex and needs more periphery components which increase the cost. The Boost PFC under CRM is easier to be implemented. Nevertheless, the variable switch frequency makes the system (including the power-stage inductor and capacitor) hard to design. It seems that the CRM PFC is more attractive in low power applications which only need to meet IEC61000-3-2 D standard. Some experiment results are also presented for the comparison.
Cite this paper: W. Zhang, W. Zhang, J. Yang and F. Al-Naemi, "Comparisons between CRM and CCM PFC," Energy and Power Engineering, Vol. 5 No. 4, 2013, pp. 864-868. doi: 10.4236/epe.2013.54B165.
References

[1]   X. W. Mao and D. W. Zhu, “The Control IC, Principles and Applications of PFC,” 2007, 1st edition, China Electric Power PRESS

[2]   R. Keller and G. Baker, “Unity Power Factor off-line Switching Power Supply,” in IEEE INTELEC record, 1984, pp. 332-339.

[3]   W. P. Zhang, F. Chen, X. S. Zhao and Y. C. Liu, “A Discrete Modeling for Power Factor Correction Circuit,” PEDS 2009, pp. 160-163.

[4]   K. I. HWu, C. H. Wu and C. F. Chuang, “Development of AC-DC Converter for Laboratory Power Amplifier,” PEDS 2009, pp. 1534-1541.

[5]   W. P. Zhang, “The Modeling and Control of Switch Converter,” M, first edition, 1996.

[6]   J. Sun, R. M. Bass, “Modeling and Practical Design Issues for Average Current Control,” in Conf. Rec, APEC Fourteenth annual, 1999, pp. 980-986

[7]   P. C. TODD, “UC3854 Controlled Power Factor Correction Circuit Design”, UNITRODE application note, U134

[8]   S. L. Xie, L. F. Liu and J. B. Liu, “100 W Power Factor Correction of Basing On L6561,” AIMSEC 2011, 2nd conference, pp. 3599-3602.

[9]   S. L. Liu and Y. G. Yan, “UC3854A/B Power Factor Boost Controllers Provide the Improvements to UC3854 and Power Limiting with Sinusoidal Input Current for PFC Front Ends,” Electronic Components Application, Vol. 3, No. 1, Mar 2001, pp. 31-36.

[10]   J. W. Kim, S. M Choi and K. T Kim, “Variable On-time Control of the Critical Conduction Mode Boost Power Factor Correction Converter to Improve Zero-Crossing Distortion” PEDS 2005, pp. 1542-1546.

 
 
Top