JSS  Vol.1 No.5 , October 2013
A Study on the Interoperability between 2D Drawings and BIM-Based 3D Drawings
ABSTRACT
While it is expected that the introduction of BIM, which recently emerged as a new paradigm in the con-struction industry, will bring about various effects, 2D-based products cannot be easily substituted with BIM. As such, the 2D and 3D works that designers and contractors have to perform at the same time will lead to increased construction costs and tasks. To minimize the overlapping of BMI and 2D drawings so as to reduce the construction costs, this study surveyed the products list based on electronic design drawings and on the existing supply guidelines in South Korea, and examined the 2D-based products among them that can be substituted with BIM models if the existing electronic supply system is changed to a BIM ordering system. Based on the results of the survey, this article proposes a BIM-based product supply and future development plan at the current time, when 2D and 3D drawings coexist. It is expected that the results of this article will be used as reference data for considering the interrelation of a BIM-based product supply system to 2D drawings as well as the existence of alternative drawings

Cite this paper
Bae Seo, M. and Beom Ju, K. (2013) A Study on the Interoperability between 2D Drawings and BIM-Based 3D Drawings. Open Journal of Social Sciences, 1, 10-14. doi: 10.4236/jss.2013.15003.
References
[1]   Chae, K. S., & Lee, G. (2011). A study on the problems of and measurements needed for improving the representations and drawing methods of architectural drawings by adopting BIM. Proceedings of Architectural Institute of Korea, Planning, 27, 67-74.

[2]   Kwon, O. C., & Jo, C. W. (2008). A study on the improvement of 2D digital drawing standards considering the paradigm shift to BIM. Proceedings of Architectural Institute of Korea, Planning, 24, 49-57.

[3]   Ministry of Land, Transport, and Maritime Affairs (2012). Electronic design document creation and supply guideline (road and river). South Korea: MLTM Press.

[4]   Oh, H. O., Jung, J. H., & Lee, J. C. (2013). A guideline for structural drawings based on BIM. Proceedings of Architectural Institute of Korea, Structure, 29, 39-46.

[5]   Seong, J. H., Chae, K. S., Choi, J. C., & Kim, K. C. (2009). A study on extracting 2D drawings from the BIM model considering the Korean standard for CAD drawings. In Conference Proceedings of Computational Structural Engineering Institute of Korea (pp. 573-577). South Korea: Computational Structural Engineering Institute Press.

 
 
Top