MSCE  Vol.1 No.5 , October 2013
The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic
ABSTRACT

This article presents the results of deformation-strength properties measurement and microstructural analysis of heterogeneous polymer matrix consisting of thermoset and thermoplastic polymers. Thermosetting material is a diamino-diphenil sulfon-cured epoxy oligomer. Polysulfone was used as thermoplastic material. Two different technological processes were used to obtain heterogeneous polymer matrix: the material was mixed in the block, or layered material was produced in which a layer of thermoplastic material alternated with a layer of epoxy oligomer.


Cite this paper
Malysheva, G. , Liu, L. , Ouyang, X. and Kulakov, O. (2013) The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic. Journal of Materials Science and Chemical Engineering, 1, 23-27. doi: 10.4236/msce.2013.15005.
References
[1]   A. Muranov, G. Malysheva and A. Pilyugina, “The Polymeric Heterogeneous matrix for Composites,” ACM-TAA-2012, Werxham, 2012.

[2]   M. Kerber and I. Gorbunova, “Binders for Polymeric Composite Materials,” Plastics, No. 12, 2010, pp. 14-21.

 
 
Top