Back
 JAMP  Vol.1 No.4 , October 2013
Modeling of the Behavior of a Deep Groove Ball Bearing in Its Housing
Abstract: Load distribution in deep groove ball bearing has been studied in this work. A deep groove ball bearing model is proposed basing on geometry specific measurement. Two approaches (finite element method and semi-analytical) have been used to determine the distribution of an external radial force applied. These two approaches have been compared in terms of computation time and precision. At the second point, a deformable complex bearing housing has been integrated in the FEM ball bearing model to assess the influence of its deformation on load distribution.
Cite this paper: E. Azianou, A. , Debray, K. , Bolaers, F. , Chiozzi, P. and Palleschi, F. (2013) Modeling of the Behavior of a Deep Groove Ball Bearing in Its Housing. Journal of Applied Mathematics and Physics, 1, 45-50. doi: 10.4236/jamp.2013.14009.
References

[1]   R. Stribeck, “Ball Bearings for Various Loads,” Transactions of the ASME, Vol. 29, 1907, pp. 420-463

[2]   H. Sjoväll, “The Load Distribution within Ball and Roller Bearings under Given External Radial and Axial Load,” TekniskTidskrift, Mek., h.9, 1933.

[3]   A. B. Jones, “A General Theory for Elastically Constrained Ball and Radial Roller Bearing under Arbitrary Load and Speed Conditions,” Journal of Basic Engineering, Vol. 82, No. 2, 1960, pp. 309-320.

[4]   H. Hertz, “Uber die Beruhrung Fester Elastischer Korper (On the Contact of Elastic Solids),” J Reine Angew Math, Vol. 92, 1882, pp. 156-171.

[5]   T. A. Harris, “Rolling Bearing Analysis,” Wiley, New York, 2001.

[6]   Y. Kanga and P.-C. Shen, “A Modification of the Jones- Harris Method for Deep-Groove Ball Bearings,” Tribology International, Vol. 39, No. 11, 2006, pp. 1413-1420. http://dx.doi.org/10.1016/j.triboint.2005.12.005

[7]   A. Bourdon, J. Rigal and D. Play, “Static Rolling Bearing Models in a C.A.D. Environment for the Study of Complex Mechanisms: Part II—Complete Assembly Model,” Journal of Tribology, Vol. 121, No. 2, 1999, pp. 215-223. http://dx.doi.org/10.1115/1.2833924

[8]   M.C. Ricci, “Internal Loading Distribution in Statically Loaded Ball Bearings Subjected to a Centric Thrust Load: Alternative Approach,” World Academy of Science, Engineering and Technology, Vol. 65, 2010, pp. 641-649.

[9]   “Effect of Internal Clearance on Load Distribution and Life of Radially Loaded Ball and Roller Bearings,” 65th Annual Meeting and Exhibition Sponsored by the Society of Tribologists and Lubrication Engineers (STLE), Las Vegas, Nevada, 16-20 May 2010.

[10]   F. B. Oswald and E. V. Zaretsky and W. J. Anderson, “Rolling-Element Bearings,” In: E. E. Bisson and W. J. Anderson, Eds., Advanced Bearing Technology, NASA/ SP-38, 1964, pp. 164-168.

 
 
Top