The natural rubber (NR) was mixed with chlorosulfonated polyethylene (CSM), due to the difference of polarity in NR and CSM made this blend incompatible and the third component was used. Epoxidzed natural rubber (ENR) was used as a third component. NR/CSM blended with the blend ratio of 50/50 was prepared by using a two-roll mill and vulcanization in a compression mold at 160°C. The ENR content was varied from 1 to 7 phr. The curing characteristics, morphology, mechanical properties, and automotive fuel swelling were investigated. The results indicated that the cure time of the blend rubbers was shorter as adding ENR. The mechanical properties of the blend rubbers were not affected by ENR content. However, automotive fuel resistance of the blend rubbers was found to increase with adding ENR in rubber blend.
 A. J. Tinker and K. P. Jones, “Blends of Natural Rubber: Novel Techniques for blending with Speciality Polymers,” Chapman & Hall, London, 1998. http://dx.doi.org/10.1007/978-94-011-4922-8
 C. Koning, M. van Duin, C. Pagnoulle and R. Jerome, “Strategies for Compatibilization of Polymer Blends,” Progress in Polymer Science, Vol. 23, No. 4, 1998, pp. 707-757. http://dx.doi.org/10.1016/S0079-6700(97)00054-3
 K. Saguan, T. Suteewong, P. Saendee, U. Buranabunya and P. Tangboriboonrat, “Composite Natural Rubber Based Latex Particles: A Novel Approach,” Polymer, Vol. 46, No. 4, 2005, pp. 1373-1378. http://dx.doi.org/10.1016/j.polymer.2004.11.074
 S. H. EL-Sabbagh, “Compatibility Study of Natural Rubber and Ethylene-Propylene-Diene Rubber Blends,” Journal of Applied Polymer Science, Vol. 90, No. 1, 2003, pp. 1-11. http://dx.doi.org/10.1002/app.12345
 M. T. Ramesan, “Thermogravimetric Analysis, Flammability and Oil Resistance Properties in Natural Rubber and Di-Chlorocarbene Modified Styrene Butadiene Rubber Blends,” Reactive and Functional Polymers, Vol. 59, No. 3, 2004, pp. 267-274. http://dx.doi.org/10.1016/j.reactfunctpolym.2004.02.005
 K. I. Elizabeth, R. Alex and S. Varghese, “Evaluation of Blends of Natural Rubber and Hydrogenated Nitrile Rubber Containing Chemically Modified Natural Rubber,” Plastics, Rubber and Composites, Vol. 37, 2008, pp. 359-366. http://dx.doi.org/10.1179/174328908X314343
 V. Tanrattanakul and A. Petchkaew, “Mechanical Properties and Blend Compatibility of Natural Rubber—Chlorosul-Fonated Polyethylene Blends,” Journal of Applied Polymer Science, Vol. 99, No. 1, 2006, pp. 127-140. http://dx.doi.org/10.1002/app.22500
 G. Markovic, B. Radovanovic, J. Budinski Simendic and M. Marinovic-Cincovic, “Curing Characteristics of Chlorosulphonated Polyethylene and Natural Rubber Blends,” Journal of Serbian Chemical Society, Vol. 70, No. 5, 2005, pp. 695-703. http://dx.doi.org/10.2298/JSC0505695M
 M. Phiriyawirut, “Preparation of Biodiesel Oil Resistance Rubbers from Natural Rubber/Fluoro Elastomer Blends,” Proceeding of the 2nd South East Asian Technical University Consortium (SEATUC) Symposium, Bandung, 26-27 February 2008, pp. 50-55.
 A. Y. Coran and R. Patel, “Rubber-Thermoplastic Compositions 1. EPDM-Polypropylene Thermoplastic Vulcanizates,” Rubber Chemistry and Technology, Vol. 53, No. 1, 1980, pp. 141-150. http://dx.doi.org/10.5254/1.3535023
 A. P. Plochocki, S. S. Dagli and R. D. Andrews, “Interface in Binary Mixtures of Polymers Containing a Corresponding Block Copolymer. Effects of Industrial Mixing Processes and of Coalescence,” Polymer Engineering and Science, Vol. 30, No. 12, 1990, pp. 741-752. http://dx.doi.org/10.1002/pen.760301207
 C. Sirisinha, P. Saeoui and J. Guaysomboon, “Oil and Thermal Aging Resistance in Compatibilized and Thermally Stabilized Chlorinated Polyethylene/Natural Rubber Blends,” Polymer, Vol. 45, No. 14, 2004, pp. 4909-4915. http://dx.doi.org/10.1016/j.polymer.2004.05.015
 H. Ismail and H. M Hairunezam, “The Effect of a Compatibilizer on Curing Characteristics, Mechanical Properties and Oil Resistance of Styrene Butadiene Rubber/ Epoxidized Natural Rubber Blends,” European Polymer Journal, Vol. 37, No. 1, 2001, pp. 39-44. http://dx.doi.org/10.1016/S0014-3057(00)00099-9
 S. Mukhopadhyay and S. K. De, “Self-Vulcanizable Rubber Blend Systems Based on Epoxidized Natural Rubber and Chlorosulfonated Polyethylene: Effect of Blend Composition, Epoxy Content of Epoxidized Natural Rubber, and Reinforcing Black Filler on Physical Properties,” Journal of Applied Polymer Science, Vol. 42, No. 10, 1991, pp. 2773-2786. http://dx.doi.org/10.1002/app.1991.070421016