Back
 EPE  Vol.5 No.4 B , July 2013
Automatic Modeling of Fault Tree for NuIEEE Transactions on Power Electronics,Clear Power Safety I&C Configuration
Abstract: The automatic modeling of fault tree for nuclear power safety I&C configuration is designed to meet the requirements of reducing the workload and improving the traceability during the nuclear power safety I&C system reliability assessment work. To complete the fault tree automatic modeling, the Visio Automation software technology is used to analyze the topology of the nuclear power safety I&C system hardware device and software function. The good result in practical implementations shows that the nuclear power safety I&C system fault tree modeling work is successfully simplified.
Cite this paper: S. Leng, B. Zhang, W. Sun, Z. Guo and Y. Hao, "Automatic Modeling of Fault Tree for NuIEEE Transactions on Power Electronics,Clear Power Safety I&C Configuration," Energy and Power Engineering, Vol. 5 No. 4, 2013, pp. 269-273. doi: 10.4236/epe.2013.54B052.
References

[1]   S. Margaret, “Computer-assisted Fault Tree Construction using a Knowledge-based Approach,” IEEE Transaction on Reliability, Vol. 43, No. 1, 2008, pp. 112-120. doi:10.1109/24.285124

[2]   J. Xiang and K. Yanoo, “Automatic Static Fault Tree Analysis from System Models,” Dependable Computing (PRDC), 2010 IEEE 16th Pacific Rim International Symposium on, Tokyo, December 2010, pp. 241-242.

[3]   D. L. Iverson, “Automatic Translation of Digraph to Fault-tree Models,” Reliability and Maintainability Symposium, 1992. Proceedings, Annual, Las Vegas, 21-23 January 1992, pp. 354-362.

[4]   J. Xiang, K. Yanoo, Y. Maeno and K. Tadano, “Autmatic Synthesis of Static Fault Trees from System Models,” Secure Software Integration and Reliability Improvement (SSIRI), 2011 Fifth International Conference on, Jeju Island, 27-29 June 2011, pp. 127-136.

[5]   A. Madni, “The Role of Human Factors in Expert Systems Design and Acceptance,” Human Factors: The Journal of the Human Factors and Ergonomics Society, Vol. 30, No. 4,1988, pp. 395-414.

[6]   Q. Liu, X. J. Liu and X. B. Ma, “Analysis of Logic Graph Based on Visio Automation,” Software Guide, Vol. 8, No. 1, 2009, pp. 13-15.

[7]   B. Han, J. J. Tong and D. Z. Xue,” Fault Tree Computer-Aided Building Expert System,” Nuclear Power Engineering, Vol. 24, No. 1, 2003, pp. 77-79

[8]   H. CH. Shi and Y. Wang, “Expert System for Fault Diagnosis in a Sewage-disposal Factory,” Feedwater and Drainage, Vol. 27, No. 8,2007,pp. 56-60

 
 
Top