This paper presents two infrared thermography methods with CO2 Laser excitation and microwave excitation applied to defect detection in CFRP. The tests were conducted with two specimens, one with defect, and another one without defect. On two concrete plates 40 cm× 40 cm× 4.5 cmwere reinforced by CFRP; the defects were made by the absence of adhesive on an area10 cm× 10 cm. The specimens were heated by microwave, generated by a commercial magnetron of 2.45 GHz and guided by a pyramidal horn antenna, with a power of 360 W within 150 s. Another series of the tests was conducted with CO2 Laser, wavelength 10.6 μm, by heating the samples with a power of 300 W within 40 s. An infrared camera sensitive to medium waves in range of 3 - 5 μm, with a detector of 320 × 256 matrix detector in InSb (Indium Antimonide), was used to record the thermograms. As a result, the CO2 Laser excitation is better for the delamination detection in CFRP. This study opens interesting perspectives for inspecting other types of defects in materials sciences; the microwave excitation is suitable for the deep defects in the materials whereas the CO2 Laser excitation is better for the defects near the surface of the materials.
 R. Sen and G. Mullins, “Application of FRP Composites for Underwater Piles Repair,” Composites Part B: Engineering, Vol. 38, No. 5-6, 2007, pp. 751-758. http://dx.doi.org/10.1016/j.compositesb.2006.07.011
 M. V. Seica and J. A. Packer, “FRP Materials for the Rehabilitation of Tubular Steel Structures, for Underwater Applications,” Composite Structures, Vol. 80, No. 3, 2007, pp. 440-450. http://dx.doi.org/10.1016/j.compstruct.2006.05.029
 L. De Lorenzis and J. G. Teng, “Near-Surface Mounted FRP Reinforcement: An Emerging Technique for Strengthening Structures,” Composites Part B: Engineering, Vol. 38, No. 2, 2007, pp. 119-143. http://dx.doi.org/10.1016/j.compositesb.2006.08.003
 S. B. Kim, et al., “Development of Aqua Epoxy for Repair and Strengthening of RC Structural Members in Underwater,” Construction and Building Materials, Vol. 23, No. 9, 2009, pp. 3079-3086. http://dx.doi.org/10.1016/j.conbuildmat.2009.04.002
 Ch. Maierhofer, A. Brink, M. Rollig and H. Wiggenhauser, “Transient Thermography for Structural Investigation of Concrete and Composites in the Near Surface Region,” Infrared Physics & Technology, Vol. 43, No. 3-5, 2002, pp. 271-278. http://dx.doi.org/10.1016/S1350-4495(02)00151-2
 J. R. Brown and H. R. Hamilton, “Quantitative Infrared Thermography Inspection for FRP Applied to Concrete Using Single Pixel Analysis,” Construction and Building Materials, Vol. 38, 2013, pp. 1292-1302.
 W. L. Lai, et al., “Characterization of the Deterioration of Externally Bonded CFRP-Concrete Composites Using Quantitative Infrared Thermography,” Cement and Concrete Composites, Vol. 32, No. 9, 2010, pp. 740-746. http://dx.doi.org/10.1016/j.cemconcomp.2010.03.008
 C. A. Balaras and A. A. Argiriou, “Infrared Thermography for Building Diagnostics,” Energy and Buildings, Vol. 34, No. 2, 2002, pp. 171-183. http://dx.doi.org/10.1016/S0378-7788(01)00105-0
 M. Choi, K. Kang, J. Park, W. Kim and K. Kim, “Quantitative Determination of a Subsurface Defect of Reference Specimen by Lock-In Infrared Thermography,” NDT & E International, Vol. 41, No. 2, 2008, pp. 119-124. http://dx.doi.org/10.1016/j.ndteint.2007.08.006
 S. Vallerand and X. Maldague, “Defect Characterization in Pulsed Thermography: A Statistical Method Compared with Kohonen and Perceptron Neural Networks,” NDT & E International, Vol. 33, No. 5, 2000, pp. 307-315. http://dx.doi.org/10.1016/S0963-8695(99)00056-0
 C. Ibarra-Castanedo, F. Galmiche, A. Darabi, M. Pilla, M. Klein, A. Ziadi, S. Vallerand, J.-F. Pelletier and X. Maldague, “Thermographic Nondestructive Evaluation: Overview of Recent Progress,” In: SPIE—Society of PhotoOptical Instrumentation Engineers Proceedings Volume 5073, Procedures Thermosense XXV, Society of PhotoOptical Instrumentation Engineers, Bellingham, 2003, pp. 450-459.
 U. Galietti, D. Palumbo, G. Calia and F. Ancona, “New Data Analysis to Evaluate Defects in Composite Materials Using Microwaves Thermography,” The 11th International Conference on Quantitative InfraRed Thermography, Naples, 11-14 June 2012, 10p.
 J. L. Pedreno-Molina, J. Monzó-Cabrera and M. Pinzolas, “A New Procedure for Power Efficiency Optimization in Microwave Ovens Based on Thermographic Measurements and Load Location Search,” International Communications in Heat and Mass Transfer, Vol. 34, No. 5, 2007, pp. 564-569. http://dx.doi.org/10.1016/j.icheatmasstransfer.2007.02.002
 G. Cuccurullo and V. Pierro, “A Procedure to Measure Electromagnetic Skin Depth in Microwave Heating,” Infrared Physics & Technology, Vol. 46, No. 1-2, 2004, pp. 49-55. http://dx.doi.org/10.1016/j.infrared.2004.03.006
 T. Li, D. P. Almond and D. A. S. Rees, “Crack Imaging by Scanning Pulsed Laser Spot Thermography,” NDT & E International, Vol. 44, No. 2, 2011, pp. 216-225. http://dx.doi.org/10.1016/j.ndteint.2010.08.006
 J. Schlichting, Ch. Maierhofer and M. Kreutzbruck, “Crack Sizing by Laser Excited Thermography,” NDT & E International, Vol. 45, No. 1, 2012, pp. 133-140. http://dx.doi.org/10.1016/j.ndteint.2011.09.014