Cite this paper
O. Takakuwa, Y. Kawaragi and H. Soyama, "Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress," Journal of Surface Engineered Materials and Advanced Technology
, Vol. 3 No. 4, 2013, pp. 262-268. doi: 10.4236/jsemat.2013.34035
 Society of Shot Peening Technology of Japan, “Fatigue of Metals and Shot Peening,” Gendai-kougaku-sya, Tokyo, 2004.
 M. Dao, N. Chollacoop, K. J. Van Vliet, T. A. Venkatesh, and S. Suresh, “Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation,” Acta Materialia, Vol. 49, No. 19, 2001, pp. 3899-3918. http://dx.doi.org/10.1016/S1359-6454(01)00295-6
 Y. P. Cao and J. Lu, “A New Method to Extract the Plastic Properties of Metal Materials from an Instrumented Spherical Indentation Loading Curve,” Acta Materialia, Vol. 52, No. 13, 2004, pp. 4023-4032.
 M. Zhao, N. Ogasawara, N. Chiba and X. Chen, “A New Approach to Measure the Elastic-Plastic Properties of Bulk Materials Using Spherical Indentation,” Acta Materialia, Vol. 54, No. 1, 2006, pp. 23-32.
 N. Ogasawara, N. Chiba and X. Chen, “A Simple Framework of Spherical Indentation for Measuring Elastoplastic Properties,” Mechanics of Materials, Vol. 41, No. 9, 2009, pp. 1025-1033.
 D. Tabor, “The Hardness of Metals,” Oxford University Press, Oxford, 1951, pp. 67-69.
 J. Yan, A. M. Karlsson and X. Chen, “Determining Plastic Properties of a Material with Residual Stress by Using Conical Indenter,” International Journal of Solid and Structures, Vol. 44, No. 11-12, 2007, pp. 3720-3737.
 M. Nishikawa, Y. Kawaragi and H. Soyama, “A Method to Identify the Yield Stress of Metals Using Micro-Indentation Tests with a Spherical Indenter,” Transactions of the JSME, Series A, Vol. 76, No. 772, 2010, pp. 1781-1788.
 D. Tabor, “The Physical Meaning of Indentation and Scratch Hardness,” British Journal of Applied Physics, Vol. 7, No. 5, 1956, pp. 159-166.
 J. T. Busby, M. C. Hash and G. S. Was, “The Relationship between Hardness and Yield Stress in Irradiated Austenitic and Ferritic Steels,” Journal of Nuclear Materials, Vol. 336, No. 2-3, 2005, pp. 267-278.
 M. Kagawa and K. Nishimoto, “A Method for Evaluating the Residual Stress from Hardness Variations: Correlation of Elastic Stress and Vickers Microhardness,” Journal of the Japan Society of Precision Engineering, Vol. 56, No. 9, 1990, pp. 128-134.
 T. Y. Tsui, W. C. Oliver and G. M. Pharr, “Influence of Stress on the Measurement of Mechanical Properties Using Nanoindentation: Part 1. Experimental Studies in an Aluminum Alloy,” Journal of Materials Research, Vol. 11, No. 3, 1996, pp. 752-759.
 M. Nishikawa and H. Soyama, “Two-Step Method to Evaluate Equibiaxial Residual Stress of Metal Surface Based on Micro-Indentation Tests,” Materials and Design, Vol. 32, No. 6, 2011, pp. 3240-3247.
 H. Soyama, “Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry,” Transactions of the ASME, Journal of Fluids Engineering, Vol. 133, No. 3, 2011, Article ID: 101301-1-11.
 W. C. Oliver and G. M. Pharr, “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,” Journal of Materials Research, Vol. 7, No. 6, 1992, pp. 1564-1583. http://dx.doi.org/10.1557/JMR.1992.1564
 H. Soyama and O. Takakuwa, “Enhancing the Aggressive Strength of a Cavitating Jet and Its Practical Application,” Journal of Fluid Science and Technology, Vol. 6, No. 4, 2011, pp. 510-521. http://dx.doi.org/10.1299/jfst.6.510
 H. Soyama, T. Kikuchi, M. Nishikawa and O. Takakuwa, “Introduction of Compressive Residual Stress into Stainless Steel by Employing a Cavitating Jet in Air,” Surface and Coatings Technology, Vol. 205, No. 10, 2011, pp. 3167-3174.
 Y. Sano, “Laser Peening for Extending Service Life of Components,” Journal of Surface Finishing Society of Japan, Vol. 60, No. 11, 2009, pp. 698-703.
 S. Suresh and A.E. Giannakopoulos, “A New Method for Residual Stresses by Instrumented Sharp Indentation,” Acta Materialia, Vol. 46, No. 16, 1998, pp. 5755-5767.