JSEA  Vol.6 No.10 , October 2013
Intelligent System Design for Stator Windings Faults Diagnosis: Suitable for Maintenance Work
ABSTRACT

The short circuit is a severe fault that occurs in the stator windings. Therefore, it is very important to diagnose this type of failure in its beginning before it causes unscheduled stop and the machine loss. In this context, the Support Vector Machine (SVM) is a tool of considerable importance for standard classification. From some training data, it can diagnose whether or not there is a short circuit beginning, and which is important for predictive maintenance. This work proposes a technique for early detection of a short circuit between the turns aiming at its implementation in a real plant. The paper shows simulation and experimental results, and validates the proposed technique.


Cite this paper
L. Baccarini, V. Avelar, V. Silva and G. Amaral, "Intelligent System Design for Stator Windings Faults Diagnosis: Suitable for Maintenance Work," Journal of Software Engineering and Applications, Vol. 6 No. 10, 2013, pp. 526-532. doi: 10.4236/jsea.2013.610063.
References
[1]   D. A. Asfani, A. K. Muhammad, Syafaruddin, M. H. Purnomo and T. Hiyama, “Temporary Short Circuit Detection in Induction Motor Winding Using Combination of Wavelet Transform and Neural Network,” Expert Systems with Applications, Vol. 39, No. 5, 2012, pp. 5367-5375. http://dx.doi.org/10.1016/ j.eswa.2011.11.048

[2]   L. M. R. Baccarini, L. V. Silva, B. R. de Menezes and W. M. Caminhas, “Svm Practical Industrial Application for Mechanical Faults Diagnostic,” Expert Systems with Applications, Vol. 38, No. 6, 2011, pp. 6980-6984. http://dx.doi.org/10.1016/j.eswa.2010.12.017

[3]   M. F. S. V. D’Angelo, R. M. Palhares, R. H. C. Takahashi, R., Loschi, L. M. R. Baccarini and W. Caminhas, “Incipient Fault Detection in Induction Machine Stator-Winding Using a Fuzzy-Bayesian Change Point Detection Approach,” Applied Soft Computing, Vol. 11, No. 1, 2011, pp. 179-192. http://dx.doi.org/10.1016/j.asoc. 2009.11.008

[4]   P. Zhang, Y. Du, T. G. Habetler and B. Lu, “A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors,” IEEE Transactions on Industry Applications, Vol. 47, No. 1, 2011, pp. 34-46. http://dx.doi.org/10.1109/TIA.2010.2090839

[5]   R. M. Tallam, S. B. Lee, G. C. Stone, G. B. Kliman, J. Yoo and T. G. Habetler, “A Survey of Methods for Detection of Stator Related Faults in Induction Machines,” IEEE Transaction on Industry Application, Vol. 43, No. 4, 2007, pp. 920-933. http://dx.doi.org/10.1109/TIA.2007.900448

[6]   A. Siddique, G. S. Yadava and B. Singh, “A Review of Stator Fault Monitoring Techniques of Induction Motors,” IEEE Transactions on Energy Conversion, Vol. 20, No. 1, 2005, pp. 106-114. http://dx.doi.org/10.1109/TEC.2004. 837304

[7]   A. M. Somaya, H. S. Shehata, El-Goharey, M. I. Marei and A. K. Ibrahim, “Detection of Induction Motors Rotor/Stator Faults Using Electrical Signatures Analysis,” Proceedings of International Conference on Renewable Energies and Power Quality (ICREPQ’13), Bilbao, 20-22 March 2013, pp. 1-6.

[8]   D. Zhen, T. Wang, F. S. Gu and A. Ball, “Fault Diagnosis of Motor Drives Using Stator Current Signal Analysis Based on Dynamic Time Warping,” Mechanical Systems and Signal Processing, Vol. 34, No. 1-2, 2013, pp. 191-202. http://dx.doi.org/10.1016/j.ymssp.2012.07.018

[9]   K. K. Pandey, P. H. Zope and S. R. Suralkar, “Review on Fault Diagnosis in Three-Phase Induction Motor,” IJCA Proceedings on National Conference MEDHA 2012, Vol. 1, 2012, pp. 53-58.

[10]   O. Jasim, M. Sumner, C. Gerada and J. Arellano-Padilla, “Development of a New Fault-Tolerant Induction Motor Control Strategy Using an Enhanced Equivalent Circuit Model,” IET Electric Power Applications, Vol. 5, 2011, pp. 618-627.

[11]   J. Sottilee, F. C. Trutt and J. L. Kohler, “Condition Monitoring of Stator Windings in Induction Motors. II. Experimental Investigation of Voltage Mismatch Detectors,” IEEE Transactions on Industry Applications, Vol. 38, No. 5, 2002, pp. 1454-1459. http://dx.doi.org/10.1109/TIA.2002.802921

[12]   W. T. Thomson and M. Fenger, “Current Signature Analysis to Detect Induction Motor Faults,” IEEE Industry Application Magazine, Vol. 7, No. 4, 2001, pp. 26-34. http://dx.doi.org/10.1109/ 2943.930988

[13]   L. M. R. Baccarini, B. R. de Menezes and W. M. Caminhas, “Fault Induction Dynamic Model, Suitable for Computer Simulation: Simulation Results and Experimental Validation,” Mechanical Systems and Signal Processing, Vol. 24, No. 1, 2010, pp. 300-311. http://dx.doi.org/10.1016/j.ymssp.2009.06.014

[14]   O. A. Mohamed, N. Y. Abed and S. Garni, “Modeling and Characterization of Induction Motor Internal Faults Using Finite Element and Discrete Wavelet Transforms,” IEEE Transactions on Magnetics, Vol. 42, No. 10, 2006, pp. 3434-3436. http://dx.doi.org/10.1109/TMAG.2006.879091

[15]   Md. R. Shahriar, T. Ahsan and U. Chong, “Fault Diagnosis of Induction Motors Utilizing Local Binary Pattern Based Texture Analysis,” EURASIP Journal on Image and Video Processing, Vol. 2013, 2013, pp. 1-13. http://dx.doi.org/10.1186/1687-5281-2013-29

[16]   H. A. Khwaja, S. P. Gupta and V. Kumar, “A Statistical Approach for Fault Diagnosis in Electrical Machines,” IETE Journal of Research, Vol. 56, No. 3, 2010, pp 146-155. http://dx.doi.org/10.4103/ 0377-2063.67099

[17]   G. S. Maruthi and P. S. Vittal, “Electrical Fault Detection in Three Phase Squirrel Cage Induction Motor by Vibration Analysis Using MEMS Accelerometer,” Proceeding of International Conference on Power Electronics and Drives Systems, Vol. 2, 28 October-1 November 2005, pp. 838-843. http://dx.doi.org/10.1109/PEDS.2005.1619804

[18]   Y.-W. Youn, S.-H. Yi, D.-H. Hwang, J.-H. Sun, D.-S. Kang and Y.-H. Kim, “MUSIC-Based Diagnosis Algorithm for Identifying Broken Rotor Bar Faults in Induction Motors Using Flux Signal,” Journal of Electrical Engineering & Technology, Vol. 8, No. 2, 2013, pp. 288-294. http://dx.doi.org/10.5370/JEET. 2013.8.2.288

[19]   S. Chen and R. Zivanovic, “Modelling and Simulation of Stator and Rotor Fault Conditions in Induction Machines for Testing Fault Diagnostic Techniques,” European Transactions on Electrical Power, Vol. 20, No. 5, 2010, pp. 611-629. http://dx.doi.org/10.1002/etep.342

[20]   A. Widodo, B. S. Yang and T. Han, “Combination of Independent Component Analysis and Support Vector Machines for Intelligent Faults Diagnosis of Induction motors,” Expert Systems with Application, Vol. 32, No. 2, 2007, pp. 299-312. http://dx.doi.org/10.1016/j.eswa.2005.11.031

[21]   A. Widodo and B. S. Yang. “Wavelet Support Vector Machine for Induction Machine Fault Diagnosis Based on Transient Current Signal,” Expert System with Application, Vol. 35, No. 1-2, 2008, pp. 307-316. http://dx.doi.org/10.1016/j.eswa.2007.06.018

 
 
Top