ACT  Vol.2 No.3 , September 2013
Computer-Aided Design of X-Ray Microtomographic Scanners
Abstract: The article is to study the development of computer-aided design of X-ray microtomography—the device for investigating the structure and construction of three-dimensional images of organic and inorganic objects on the basis of shadow projections. This article provides basic information regarding CAD of X-ray microtomography and a scheme consisting of three levels. The article also shows basic relations of X-ray computed tomography, the generalized scheme of an X-ray microtomographic scanner. The methods of X-ray imaging of the spatial microstructure and morphometry of materials are described. The main characteristics of an X-ray microtomographic scanner, the X-ray source, X-ray optical elements and mechanical components of the positioning system are shown. The block scheme and software functional scheme for intelligent neural network system of analysis of the internal microstructure of objects are presented. The method of choice of design parameters of CAD of X-ray microtomography aims at improving the quality of design and reducing costs of it. It is supposed to reduce the design time and eliminate the growing number of engineers involved in development and construction of X-ray microtomographic scanners.
Cite this paper: Syryamkin, V. , Bogomolov, E. , Brazovsky, V. , Bureev, A. , Glushkov, G. and Vasiliev, A. (2013) Computer-Aided Design of X-Ray Microtomographic Scanners. Advances in Computed Tomography, 2, 83-90. doi: 10.4236/act.2013.23015.

[1]   V. I. Syryamkin and V. S. Titov, “Vision Systems,” RASCO, Handbook, Tomsk, 1992, 367 p.

[2]   I. P. Norenkov, “Basic Concepts of Computer-Aided Design,” 2nd Edition, Bauman Moscow State Technical University Press, Moscow, 2002, 336 p.

[3]   V. E. Panin, V .E. Egorushkin and P. V. Makarov, “Physical Mesomechanics and Computer Design of Materials,” Nauka, Novosibirsk, 1995, 298 p.

[4]   V. K. Kuleshov, “Physical and Experimental Basis of Radiation Monitoring and Control.Ch. 1: Basic Theory and Practice of Radiation Control,” Tomsk Polytechnic University, Tomsk, 2007, 341 p.

[5]   Yu. M. Osipov, “Multi Coordination Electro Mechatronic Propulsion System,” Tomsk State University of Control Systems and Radioelectronics Press, Tomsk, 2010, 320 p.

[6]   M. A. Bubenchikov, E. E. Gazieva, A. O. Gafurov, G. S. Glushkov, D. S. Zhdanov, D. V. San’kov, V. I. Syryamkin, S. V. Shidlovskii and A. V. Yurchenko, “Modern Methods of Materials Research and Nanotechnologies,” Tomsk State University Press, Tomsk, 2010, 366 p.

[7]   E. N. Bogomolov, V. V. Brazovskiy, A. Zh. Kaztaev and V. I. Syryamkin, “Ccontrol. Diagnostics, “Spectrum, Moscow, 2012, pp. 122-125.

[8]   E. N. Bogomolov, V. V. Brazovskiy and V. I. Syryamkin, “Method of Calculating of Digital X-Ray Microtomographic Scanners,” 13th International Scientific Conference on Measurement, Control, Information, Altai State Technical University Press, Barnaul, 2012, pp. 29-32.

[9]   E. N. Bogomolov, V. V. Brazovskiy, V. I. Syryamkin, V. A. Borodin, A. Sh. Bureev and A. V. Vasiliev, “Engineering Calculation of X-Ray Microtomographic Scanners,” Multifunctional Chemical Materials and Technologies, Tomsk, 2012, pp. 307-309.