OJA  Vol.3 No.3 A , September 2013
The Influence of Ultrasonic Treatment on the Properties of Schottky Diodes
Abstract: The given work studies the reason of the change of a superfluous current near crystallization temperature of an amorphous αPbSb metal alloy and at the same time founds out the influence of ultrasonic processing (USP) on the properties of αPbSb-nSi solar elements (SE), made by Shottki diodes technology (ShD) with a metal alloy. It is found that occurrence of a superfluous current αPbSb-nSi ShD under the influence of thermoannealing is connected with changes of structure of an amorphous film of metal at transition in a polycrystalline condition. VAC damaged αPbSb-nSi Sh Dare very sensitive to annealing time. Eventually, even at room temperature, level of a superfluous current decreases, i.e. “the wound” put by mechanical damage sort of heals, restoration process occurs the faster, the higher the annealing temperature is. Function of γt annealing parameters changes in an interval and the influence USP on photo-electric properties αPbSb-nSi SE depends on the chosen UIT mode.
Cite this paper: I. Pashayev, "The Influence of Ultrasonic Treatment on the Properties of Schottky Diodes," Open Journal of Acoustics, Vol. 3 No. 3, 2013, pp. 9-12. doi: 10.4236/oja.2013.33A002.

[1]   K. Mammadov, “Contact Piece Metal-Semiconductor with an Electrical Field of Stains,” Baku State University, Baku, 2004.

[2]   SH. G. Askerov, SH. G. Aslanov and I. G. Pashayev, “Electrophysical Properties of Barrier Structures on the Basis of Silicon with an Amorphous Metal Alloy Aluminium-Nickel,” The Electronic Engineering, Microelectronic Devices, Vol. 6, No. 78. 1989, p. 46.

[3]   N. A. Torhov, “Nature of Direct and Return Currents of Saturation in Contact Pieces Metal-Semiconductor with a Barrier of Shottki,” Semiconductors, Vol. 44, No. 6, 2010, p. 767

[4]   SH. G. Askerov, “Influence of Degree of Non-Uniformity of Border of Section on Electrophysical Properties of Structures Metal-Vacuum and Metal-Semiconductor,” the Thesis for a Doctor’s, Baku State University, Baku, 1992. p. 399.

[5]   N. A. Gusejnov, S. G. Askerov, J. M. Olih, et al., “Processing of the Irradiated Solar Cells by Means of Ultrasound,” Geliotehnika, No. 2, 2006, p.17.

[6]   A. N. Gontaruk, D. V. Korbutjak and E. V. Korbut, “Degrade-Relaxation Phenomena in Light Emitting p-n Structures on the Basis of Photodiode Gallium, Stimulated by Ultrasound,” Letters in JTF, Vol. 24, No. 15, 1998, p. 64.

[7]   K. Suzuki, K. Hasimoto and Х. Fudzimori, “Amorphous Metals,” М: Metallurgy, 1987.

[8]   I. B. Ermolovich and V. V. Milenin, “Konakovo of River В, et al., “Influence of Ultrasonic Processing on Microprocesses of Formation of Barriers of Shottki of Heterosystems M - n - n + GaAs (M=Pt, Cr, W),” Technical Physics Letters, Vol. 22, No. 6. 1996, p. 33.?

[9]   G. D. Melebaeva, Д. Melebaev, J. V. Rud and V. J. Rud “Photosensitivity of Barriers of SHOTTKI Ni-GaAs,” Semiconductors, Vol. 43, No. 1, 2009, p. 34

[10]   I. V. Ostrovskij, L. P.Steblenko and A. B. Nadtochy, “Formation of the Superficial Hardened Layer in Nondislocated Silicon at Ultrasonic Processing,” Semiconductors, Vol. 34, No. 3. 2000, p. 257.

[11]   The Parchinsky Item B., S. I. Vlasov and L. G. Ligaj, “Probe of Influence of Ultrasonic Effect on Generating Characteristics of Previously Irradiated Border of Silicon —Dioxide Silicon,” Semiconductors, Vol. 40, No. 7, 2006, pp. 829-832.

[12]   The Parchinsky Item B., S. I. Vlasov, R. A. Muminov, et at., “Influence of Ultrasound on Parameters of Structures of Metal-Dielectric-Semiconductor,” Letters in JTF, Vol. 26, No. 10. 2000, p. 40.